(下面是cmu的代码)
/* show-bytes - prints byte representation of data */
/* $begin show-bytes */
#include <stdio.h>
/* $end show-bytes */
#include <stdlib.h>
#include <string.h>
/* $begin show-bytes */
typedef unsigned char *byte_pointer;//用byte_pointer来表示unsigned char*类型
//typedef char *byte_pointer;
//typedef int *byte_pointer;
void show_bytes(byte_pointer start, size_t len) {//size_t是标准C库中定义的,应为unsigned int,在64位系统中为 long unsigned int。
size_t i;
for (i = 0; i < len; i++)
printf("%p\t0x%.2x\n", &start[i], start[i]);
printf("\n");
}
void show_int(int x) {
show_bytes((byte_pointer) &x, sizeof(int));//int四个字节,同时传过去首地址,这里可以看作是一个数组
}
void show_float(float x) {
show_bytes((byte_pointer) &x, sizeof(float));
}
void show_pointer(void *x) {
show_bytes((byte_pointer) &x, sizeof(void *));
}
/* $end show-bytes */
/* $begin test-show-bytes */
void test_show_bytes(int val) {
int ival = val;
//float fval = (float) ival;
double fval = (double) ival;
int *pval = &ival;
printf("Stack variable ival = %d\n", ival);
printf("(int)ival:\n");
show_int(ival);
printf("(float)ival:\n");
show_fer valp = (byte_pointer) &val;
show_bytes(valp, 1); /* A. */
show_bytes(valp, 2); /* B. */
show_bytes(valp, 3); /* C. */
/* $end simple-show-a */
}
void simple_show_b() {
/* $begin simple-show-b */
int val = 0x12345678;
byte_pointer valp = (byte_pointer) &val;
show_bytes(valp, 1); /* A. */
show_bytes(valp, 2); /* B. */
show_bytes(valp, 3); /* C. */
/* $end simple-show-b */
}
void float_eg() {
int x = 3490593;
float f = (float) x;
printf("For x = %d\n", x);
show_int(x);
show_float(f);
x = 3510593;
f = (float) x;
printf("For x = %d\n", x);
show_int(x);
show_float(f);
}
void string_ueg() {
/* $begin show-ustring */
const char *s = "ABCDEF";
show_bytes((byte_pointer) s, strlen(s));
/* $end show-ustring */
}
void string_leg() {
/* $begin show-lstring */
const char *s = "abcdef";
show_bytes((byte_pointer) s, strlen(s));
/* $end show-lstring */
}
void show_twocomp()
{
/* $begin show-twocomp */
short x = 12345;
short mx = -x;
show_bytes((byte_pointer) &x, sizeof(short));
show_bytes((byte_pointer) &mx, sizeof(short));
/* $end show-twocomp */
}
int main(int argc, char *argv[])
{
int val = 12345;
if (argc > 1) { //带参数时的运行结果
val = strtol(argv[1], NULL, 0);//将参数nptr字符串根据参数base来转换成长整型数
printf("calling test_show_bytes\n");
test_show_bytes(val);
} else { //不带参数时的运行结果,其实都是调用show_byte函数,只不过参数一个内定,一个自己输入
printf("calling show_twocomp\n");
show_twocomp();
printf("Calling simple_show_a\n");
simple_show_a();
printf("Calling simple_show_b\n");
simple_show_b();
printf("Calling float_eg\n");
float_eg();
printf("Calling string_ueg\n");
string_ueg();
printf("Calling string_leg\n");
string_leg();
}
return 0;
}
这个函数输出一个数值在内存中是怎么表示的。通过此函数,我们可以知道自己的电脑存储时是按大端法排列还是小端法排列(小端法排列是低地址对地位,高地址对高位,大端法则反之)。
void simple_show_b() {
/* $begin simple-show-b */
int val = 0x12345678;
byte_pointer valp = (byte_pointer) &val;
show_bytes(valp, 1); /* A. */
show_bytes(valp, 2); /* B. */
show_bytes(valp, 3); /* C. */
/* $end simple-show-b */
}
/*以下为输出案例,从这我们可以看出低位的78对应低地址0xbfa18b48,所以我们的电脑是使用小端法进行存储的。
Calling simple_show_b
0xbfa18b48 0x78
0xbfa18b48 0x78
0xbfa18b49 0x56
0xbfa18b48 0x78
0xbfa18b49 0x56
0xbfa18b4a 0x34*/
在代码的第9~11行:
typedef unsigned char *byte_pointer;//用byte_pointer来表示unsigned char*类型
//typedef char *byte_pointer;
//typedef int *byte_pointer;
我们需要思考一个问题,为什么要用unsigned char *表示byte_pointer,而不用char *或者int*来表示。
我们来看看同一个函数,如果用不同的byte_pointer来表示会怎么样:
void test_show_bytes(int val) {
//int ival = val;
float fval = (float) ival;
//double fval = (double) ival;
int *pval = &ival;
printf("Stack variable ival = %d\n", ival);
printf("(int)ival:\n");
show_int(ival);
printf("(float)ival:\n");
show_fer valp = (byte_pointer) &val;
show_bytes(valp, 1); /* A. */
show_bytes(valp, 2); /* B. */
show_bytes(valp, 3); /* C. */
/* $end simple-show-a */
}
/*typedef unsigned char *byte_pointer的结果
(float)ival:
0xbfd40020 0x00
0xbfd40021 0x00
0xbfd40022 0x80
0xbfd40023 0x4e
改为:typedef char *byte_pointer的结果
(float)ival:
0xbfbe3150 0x00
0xbfbe3151 0x00
0xbfbe3152 0xffffff80
0xbfbe3153 0x4e
改为:typedef int *byte_pointer的结果
(float)ival:
0x7ffd0d703e0c 0x4e800000
0x7ffd0d703e10 0xd703e50
0x7ffd0d703e14 0x7ffd
0x7ffd0d703e18 0x73fe8924*/
改为:typedef int *byte_pointer的结果:start[i]被解释为int,一次读取四个字节,所以第一个输出是对的,后面输出的是越界了的,是别人的量了。
改为:typedef char *byte_pointer的结果:start[i]被解释为char,一次读取一个字节。
可以看到0xbfbe3152 0xffffff80这里出问题了。ox80超过了char的最大表示正范围ox7f,此时打印格式是16进制。所以程序按照补码扩充。所以前面全是1111即f。所以变成无符号的char*类型 也是为了减少发生这种现象,让自己的正范围变大。
最后,感谢这位博主关于为什么使用unsigned char *的答案:https://blog.csdn.net/weixin_41256413/article/details/79897033