排序算法-c++

3、随机产生100 个整数构成的序列,
分别以直接插入、希尔、快速、归并等排序算法排序,
并统计各自的比较次数

#include <iostream>
using namespace std;

typedef int KeyType;
typedef int InfoType;

# define Maxsize 200 //待排序序列中记录的最大个数
# define T 7

int InsertSortCount = 0, ShellSortCount = 0, QSortCount = 0, MergeSortCount = 0;


// 待排序表中每个数据元素的数据类型定义
typedef struct
{
	KeyType key; //表示排序关键字
	//InfoType otherinfo; //排序记录中的其他所有数据项
} RedType;
// 待排序数据表的数据类型定义
typedef struct
{
	RedType r[Maxsize + 1]; //存放待排序全体记录
	int length; //排序记录个数
} SqList;

//直接插入排序
void InsertSort(SqList& L)
{
	int i, j;
	for (i = 2; i <= L.length; i++)
	{
		InsertSortCount++;
		if (L.r[i].key < L.r[i - 1].key) //小于时,将R[i]插入有序表
		{

			L.r[0] = L.r[i]; // R[0]作监测哨兵
			L.r[i] = L.r[i - 1];
			for (j = i - 2; L.r[0].key < L.r[j].key; j--) {
				InsertSortCount++;
				L.r[j + 1] = L.r[j]; //记录后移
			}
			L.r[j + 1] = L.r[0]; //插入到正确位置
		}
	}
}
//希尔排序
void ShellInsert(SqList& L,int dk) //步长为dk的插入排序
{
	int i, j;
	for (i = dk + 1; i <= L.length; i++) {
		
		ShellSortCount++;
		if (L.r[i].key < L.r[i - dk].key) //小于时,需将r[i]插入有序表
		{
			
			L.r[0] = L.r[i]; //为统一算法设置监视哨
			for (j = i - dk; j > 0 && L.r[0].key < L.r[j].key; j -= dk) {
				L.r[j + dk] = L.r[j]; //记录后移				
			}
			L.r[j + dk] = L.r[0]; //插入到正确位置
		}
	}
}
void ShellSort(SqList& L,int dita[],int t)
{ //按增量序列dlta[0,1…,t-1]对顺序表S作希尔排序
	for (int k = 0;k < t;k++)
		ShellInsert(L,dita[k]);
}
//快速排序
int Partition(SqList& L, int low, int high)
{
	L.r[0] = L.r[low]; //以子表的第一个记录作为轴值记录
	int pivotkey = L.r[low].key; //取轴值记录关键字
	while (low < high) //从表的两端交替地向中间扫描
	{
		QSortCount++;
		while (low < high && L.r[high].key >= pivotkey) high--;
		if (low < high) L.r[low++] = L.r[high];
		//将比轴值记录小的交换到低端
		while (low < high && L.r[low].key <= pivotkey) low++;
		if (low < high) L.r[high--] = L.r[low];
	} //将比轴值记录大的交换到高端
	L.r[low] = L.r[0]; //轴值（支点）记录到位
	return low; //返回轴值（支点）记录所在位置
}
void QSort(SqList& L, int low, int high)
{ //对顺序表L中的子序列L.r[low…high]作快速排序
	if (low < high)
	{
		int pivotloc = Partition(L, low, high);
		QSort(L, low, pivotloc - 1); //对小于轴值序列实现递归排序
		QSort(L, pivotloc + 1, high);
	} //对大于轴值序列实现递归排序
}
//归并排序算法
void Merge(RedType SR[], RedType TR[], int i, int m, int n)
{
	int j, k;
	for (j = m + 1, k = i; i <= m && j <= n; k++) {
		MergeSortCount++;
		if (SR[i].key <= SR[j].key) TR[k] = SR[i++];
		else TR[k] = SR[j++];
	}
	while (i <= m) TR[k++] = SR[i++];
	while (j <= n) TR[k++] = SR[j++];
}
void Msort(RedType p1[], RedType p2[], int n, int l)
{
	int i = 1, j;
	while (i + 2 * l - 1 <= n)
	{
		Merge(p1, p2, i, i + l - 1, i + 2 * l - 1);
		i = i + 2 * l;
	}
	if (i + l <= n) Merge(p1, p2, i, i + l - 1, n);
	else for (j = i; j <= n; j++) p2[j] = p1[j];
}
void MergeSort(SqList& L)
{
	int l = 1;
	RedType s[101];
	while (l < 100)
	{
		Msort(L.r, s, L.length, l);
		l = l * 2;
		Msort(s, L.r, L.length, l);
		l = l * 2;
	}
}
void display(SqList L) {
	for (int i = 1; i <= 100; i++) {
		cout << L.r[i].key << "\t";
		if (i % 10 == 0) {
			cout << endl;
		}
	}
}
int main() {

	//int a[800];

	///*
	//rand() % n +a;
 //其中的a是起始值，n-1+a是终止值，n是整数的范围
	//*/
	//for (int i = 0; i < 100; i++) {
	//	a[i] = rand() % 200 + 1;
	//}

	SqList L;
	L.length = 100;
	for (int i = 1; i <= 100; i++) {
		L.r[i].key = rand() % 200 + 1;
	}

	cout << "随机生成的100个数：" << endl;
	display(L);

	int dita[T] = { 49,37,29,23,19,11,1 };
	int c = 1;
	
	while (c)
	{
		cout << "+=====================================+" << endl;
		cout << "|             1.直接插入排序          |" << endl;
		cout << "|             2.希尔                  |"<< endl;
		cout << "|             3.快速                  |"<< endl;
		cout << "|             4.归并                  |" << endl;
		cout << "|             0.退出                  |" << endl;
		cout << "+=====================================+" << endl;
		cout << "请选择：";
		cin >> c;
		switch (c)
		{
		case 1:
			cout << endl << "直接插入排序：" << endl;
			InsertSort(L);
			display(L);
			cout << "比较次数：" << InsertSortCount << endl;
			cout << endl;
			break;
		case 2:
			cout << endl << "希尔:" << endl;
			ShellSort(L, dita, T);
			display(L);
			cout << "比较次数：" << ShellSortCount << endl;
			cout << endl;
			break;
		case 3:
			cout << endl << "快速:" << endl;
			QSort(L, 0, 100);
			display(L);
			cout << "比较次数：" << QSortCount << endl;
			cout << endl;
			break;
		case 4:
			cout << endl << "归并:" << endl;
			MergeSort(L);
			display(L);
			cout << "比较次数：" << MergeSortCount << endl;
			cout << endl;
			break;
		default:
			break;
		}
	}



	
	//int dita[10];
	//int t = 10;
	//for (int i = 0; i < t; i++) {
	//	if (i == 0) {
	//		dita[0] = 49;
	//	}
	//	else {
	//		dita[i] = dita[i - 1] / 2 + 1;
	//		if (dita[i] <= 1) {
	//			dita[i] = 1;
	//		}
	//	}
	//}
	

	

	

	return 0;
}