配置路由器为DHCP Server（二）

配置路由器为DHCP终极代理

• 在 R1 上使能 DHCP 功能
• 在 R1 的各个接口下使能 DHCP 中继功能，并配置 DHCP Server 的 IP 地址
  网络拓扑图：
  
  配置 R1 的接口参数：在上一篇文章DHCP　Server（一）的前提下增加一个接口并且要删除在接口的DHCP功能的配置：
  上一篇文章DHCP　Server（一）:
  https://blog.csdn.net/qq_48111800/article/details/123964749?spm=1001.2014.3001.5501

[DHCP]sysn R1
[R1]int g0/0/3
[R1-GigabitEthernet0/0/3]ip add 172.10.1.2 24
[R1-GigabitEthernet0/0/3]quit
[R1-GigabitEthernet0/0/0]undo dhcp select global
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]undo dhcp select global
[R1-GigabitEthernet0/0/1]int g0/0/2
[R1-GigabitEthernet0/0/2]undo dhcp select global
[R1-GigabitEthernet0/0/2]quit

此时R１的接口状态：

[R1]dis ip int brief 
*down: administratively down
!down: FIB overload down
^down: standby
(l): loopback
(s): spoofing
(d): Dampening Suppressed
The number of interface that is UP in Physical is 5
The number of interface that is DOWN in Physical is 6
The number of interface that is UP in Protocol is 5
The number of interface that is DOWN in Protocol is 6

Interface                         IP Address/Mask      Physical   Protocol  
Ethernet0/0/0                     unassigned           down       down      
Ethernet0/0/1                     unassigned           down       down      
GigabitEt