[ R1] ospf 1 router-id 1.1 .1.1
[ R1-ospf-1-area-0.0.0.0] network 1.1 .1.1 0.0 .0.0
[ R1-ospf-1-area-0.0.0.0] network 17.1 .1.1 0.0 .0.0
[ R1-ospf-1-area-0.0.0.0] display this
[ V200R003C00]
area 0.0 .0.0
network 1.1 .1.1 0.0 .0.0
network 17.1 .1.1 0.0 .0.0
return
[ R2-ospf-1-area-0.0.0.0] display this
[ V200R003C00]
area 0.0 .0.0
network 2.2 .2.2 0.0 .0.0
network 72.1 .1.1 0.0 .0.0
return
[ R4-ospf-1-area-0.0.0.1] display this
[ V200R003C00]
area 0.0 .0.1
network 4.4 .4.4 0.0 .0.0
network 34.1 .1.2 0.0 .0.0
network 45.1 .1.1 0.0 .0.0
return
[ R5-ospf-1-area-0.0.0.1] display this
[ V200R003C00]
area 0.0 .0.1
network 5.5 .5.5 0.0 .0.0
network 45.1 .1.2 0.0 .0.0
return
[ R5-ospf-1-area-0.0.0.2] display this
[ V200R003C00]
area 0.0 .0.2
network 56.1 .1.1 0.0 .0.0
return
[ R5-ospf-1-area-0.0.0.2] display this
[ V200R003C00]
area 0.0 .0.2
network 56.1 .1.1 0.0 .0.0
return
[ R5-ospf-1] import-route ospf 2
[ R5-ospf-1] import-route ospf 2
[ R3] acl 2000
[ R3- acl- basic- 2000 ] rule 5 permit source 73.1 .1 .0 0.0 .0 .255
[ R3- acl- basic- 2000 ] int
[ R3- acl- basic- 2000 ] int g0/ 0 / 0
[ R3- GigabitEthernet0/ 0 / 0 ] nat outbound 2000
[ R3- GigabitEthernet0/ 0 / 0 ] dis nat out
NAT Outbound Information:
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Interface Acl Address- group/ IP/ Interface Type
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
GigabitEthernet0/ 0 / 0 2000 73.1 .1 .1 easyip
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
[ R3] ip route-static 0.0 .0.0 0 73.1 .1.0
interface Tunnel0/0/0
ip address 10.0 .1.1 255.255 .255.0
tunnel-protocol gre p2mp
source 17.1 .1.1
ospf network-type broadcast
nhrp entry multicast dynamic
nhrp network-id 100
nhrp entry 10.0 .1.2 72.1 .1.1 register
[ R3] ping 7.7 .7.7
PING 7.7 .7.7: 56 data bytes, press CTRL_C to break
Reply from 7.7 .7.7: bytes = 56 Sequence = 1 ttl = 255 time = 20 ms
Reply from 7.7 .7.7: bytes = 56 Sequence = 2 ttl = 255 time = 20 ms
Reply from 7.7 .7.7: bytes = 56 Sequence = 3 ttl = 255 time = 30 ms
Reply from 7.7 .7.7: bytes = 56 Sequence = 4 ttl = 255 time = 30 ms
Reply from 7.7 .7.7: bytes = 56 Sequence = 5 ttl = 255 time = 30 ms