python 模拟数码管，绘制数码管图像

python 模拟数码管，绘制数码管图像，可以调节共阴共阳

1、数码管编码表

# 定义共阳数码管的编码表 
table = [0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0x88,0x83,0xc6,0xa1,0x86,0x8e]
# 定义共阴数码管的编码表 
table2 = [0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71]

2、绘制数码管

# author：兴于诗 CSDN
import matplotlib.pyplot as plt
import numpy as np
segments = {
    'A': [(0.45, 0.55), (0.74, 0.55), (0.69, 0.50), (0.5, 0.50)],
    'B': [(0.75, 0.54), (0.75, 0.26), (0.7, 0.29), (0.7, 0.49)],
    'C': [(0.75, 0.25), (0.75, 0), (0.7, 0.05), (0.7, 0.21)],
    'D': [(0.74, 0), (0.45, 0), (0.5, 0.05), (0.69, 0.05)],
    'E': [(0.44, 0), (0.44, 0.25), (0.49, 0.21), (0.49, 0.05)],
    'F': [(0.44, 0.26), (0.44, 0.54), (0.49, 0.49), (0.49, 0.29)],
    'G': [(0.45, 0.25),(0.5, 0.28), (0.69, 0.28),(0.74, 0.25), (0.69, 0.22), (0.5, 0.22)],
    'DP': [(0.8, 0.05), (0.85, 00.05), (0.85, 0.1), (0.8, 0.1)]
}
def draw_segment(ax, segment):
    x = [p[0] for p in segment]
    y = [p[1] for p in segment]
    ax.fill(x, y, 'red')
def draw_digit(value,type="LOW"):
    # HIGH:共阳
    # LOW：共阴
    if type=="LOW":
        pass
    elif type=="HIGH": 
        value=~value
    fig, ax = plt.subplots()
    ax.set_aspect('equal')
    ax.axis('off')
    for segment, state in zip(segments.keys(), [bool(value & (1 << i)) for i in range(8)]):
        if state:
            draw_segment(ax, segments[segment])
    plt.xlim(0, 1)
    plt.ylim(0, 1)
    plt.show()
# HIGH:共阳
# LOW：共阴

# 定义共阳数码管的编码表 
table = [0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0x88,0x83,0xc6,0xa1,0x86,0x8e]
# # 定义共阴数码管的编码表 
# table = [0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71]

#=====测试======
#1、 生成数码管1图片
value = 0xF9
draw_digit(value,type="HIGH")

#2、 生成数码管1-9 a-F图片
for i in table:
    draw_digit(i,type="HIGH")

结果：