目录
1、修改GUI
之前叫IIC，我们其实是借助EEPROM来测试IIC是不是好用所以名称改一改
长得有点奇怪
这样虽然一样长了但是还是很奇怪。
就先这样吧
layout_l = [
[tool.name('NetWork'), sg.Button('Connect', key='Connect')],
[tool.name('NetWork'), sg.Button('Disconnect', key='Disconnect')],
[tool.name('NetWork'), sg.Output(size=(32, 1), key='IP')],
[sg.Checkbox('Input', use_custom_titlebar, enable_events=True, key='input')],
[sg.InputText(disabled=True, key='txbuff'), sg.Button('SEND', key='send')],
[tool.name('Text'), sg.Button('SPI', key='SPI')],
[sg.InputText(key='AT24C02_I', default_text=''), sg.Button('AT24C02 WRITE', key='AT24C02_W')],
]
# 右部layout
layout_r = [
[sg.Output(size=(16, 1), key='LED_O'), sg.Button('LED', key='LED')],
[sg.Output(size=(16, 1), key='SR501_O'), sg.Button('SR501', key='SR501')],
[sg.Output(size=(16, 1), key='SR04_O'), sg.Button('SR04', key='SR04')],
[sg.Output(size=(16, 1), key='IRDA_O'), sg.Button('IRDA', key='IRDA')],
[sg.Output(size=(16, 1), key='DHT11_O'), sg.Button('DHT11', key='dht11')],
[sg.Output(size=(16, 1), key='DS18B20_O'), sg.Button('DS18B20', key='ds18b20')],
[sg.Output(size=(16, 1), key='AT24C02_O'), sg.Button('AT24C02 READ', key='AT24C02_R')],
#[tool.name('Text'), sg.Button('IIC', key='IIC')],
]2、修改client
'''
fuction : 客户端程序
author : 辛天宇
date : 2024-4-13
-------------------------------
author date modify
辛天宇 2024-4-15 结合GUI和网络通信
'''
import show
import tcp
import tool
import socket
import global_var
def send_handle(window, client_socket, values):
global_var.TX_BUF = values['txbuff']
print(f"txbuff={global_var.TX_BUF}")
# 清理input
window['txbuff'].update(value='')
data = global_var.TX_BUF
client_socket.sendall(data.encode())
# 接收服务器的响应
data = client_socket.recv(512)
# 将字节字符串转化为字符串
global_var.RX_BUF = data.decode('utf-8')
# print(f"rx......{global_var.RX_BUF}")
def quit_handel(client_socket):
cmd='Q'
client_socket.sendall(cmd.encode())
tcp.disconnect_to_server(client_socket)
def motor_handel(window, client_socket, values):
i = int(values['MOTOR_I'])
global_var.MOTOR_DATA = str(abs(i)%360)
if i >= 0:
global_var.MOTOR_DIRECTION='0'
else:
global_var.MOTOR_DIRECTION='1'
message = 's'+global_var.MOTOR_DIRECTION+global_var.MOTOR_DATA
# 清理input
window['MOTOR_I'].update(value='0')
set_tx_buf('motor', message)
send_cmd(client_socket)
# 接收服务器的响应
data = client_socket.recv(512)
# 将字节字符串转化为字符串
global_var.RX_BUF = data.decode('utf-8')
# print(f"rx......{global_var.RX_BUF}")
# 进行一次发送
def send_cmd(client_socket):
data = global_var.TX_BUF
client_socket.sendall(data.encode())
# 接收服务器的响应
data = client_socket.recv(512)
# 将字节字符串转化为字符串
global_var.RX_BUF = data.decode('utf-8')
# print(f"rx......{global_var.RX_BUF}")
# 设置发送消息
def set_tx_buf(device, message):
if device == 'sr04':
global_var.TX_BUF = '@002'+message
if device == 'led':
global_var.TX_BUF = '@000'+message
elif device == 'sr501':
global_var.TX_BUF = '@001'+message
elif device == 'irda':
global_var.TX_BUF = '@003'+message
elif device == 'motor':
global_var.TX_BUF = '@004'+message
elif device == 'dht11':
global_var.TX_BUF = '@005'+message
elif device == 'ds18b20':
global_var.TX_BUF = '@006'+message
elif device == 'AT24C02':
global_var.TX_BUF = '@007'+message
elif device == 'spi':
global_var.TX_BUF = '@008'
# 解析IRDA传入的数据
def irda_data_analysis(cmd):
if cmd[5] == 'r':
global_var.IRDA_DATA = "RED"
elif cmd[5] == 'm':
global_var.IRDA_DATA = "MENU"
elif cmd[5] == 't':
global_var.IRDA_DATA = "TEST"
elif cmd[5] == '+':
global_var.IRDA_DATA = "+"
elif cmd[5] == 'b':
global_var.IRDA_DATA = "BACK"
elif cmd[5] == 'l':
global_var.IRDA_DATA = "LEFT"
elif cmd[5] == 'p':
global_var.IRDA_DATA = "START"
elif cmd[5] == 'r':
global_var.IRDA_DATA = "RIGHT"
elif cmd[5] == '0':
global_var.IRDA_DATA = "0"
elif cmd[5] == '1':
global_var.IRDA_DATA = "1"
elif cmd[5] == '2':
global_var.IRDA_DATA = "2"
elif cmd[5] == '-':
global_var.IRDA_DATA = "-"
elif cmd[5] == 'c':
global_var.IRDA_DATA = "c"
elif cmd[5] == '3':
global_var.IRDA_DATA = "3"
elif cmd[5] == '4':
global_var.IRDA_DATA = "4"
elif cmd[5] == '5':
global_var.IRDA_DATA = "5"
elif cmd[5] == '6':
global_var.IRDA_DATA = "6"
elif cmd[5] == '7':
global_var.IRDA_DATA = "7"
elif cmd[5] == '8':
global_var.IRDA_DATA = "8"
elif cmd[5] == '9':
global_var.IRDA_DATA = "9"
# 处理数据
def cmd_handle(window):
cmd = global_var.RX_BUF
global_var.RX_BUF="#000"
if len(cmd) < 4:
print("cmd ERROR")
return -1
if '@' == cmd[0]:
# 目前驱动设备数量只有两位数
if cmd[1] == '0':
# LED: @000+1位命令位+1位数据位
if cmd[2] == '0' and cmd[3] == '0':
if cmd[5] == '1':
print("LED Status change success")
elif cmd[5] == '0':
print("LED Status change failure")
else:
print("message ERROR")
# SR501:@001+1位数据位
elif cmd[2] == '0' and cmd[3] == '1':
if cmd[5] == '1':
print("有人")
message='有人'
window['SR501_O'].update(message)
elif cmd[5] == '0':
print("无人")
message='无人'
window['SR501_O'].update(message)
else:
print("message ERROR")
# SR04
elif cmd[2] == '0' and cmd[3] == '2':
if cmd[4] == 'g':
global_var.SR04_DATA = cmd[5:8]
message = f"{global_var.SR04_DATA}cm"
window['SR04_O'].update(message)
else:
print("SR04: message ERROR")
# irda
elif cmd[2] == '0' and cmd[3] == '3':
# message = cmd[5]
# print(message)
if cmd[4] == 'g':
irda_data_analysis(cmd)
window['IRDA_O'].update(global_var.IRDA_DATA)
# motor
elif cmd[2] == '0' and cmd[3] == '4':
if cmd[4] == 's':
print("MOTOR: message SCUESS")
else:
print("MOTOR: message ERROR")
# dht11
elif cmd[2] == '0' and cmd[3] == '5':
if cmd[4] == 'g':
try:
global_var.TEM=cmd[5]+cmd[6]
global_var.HUM=cmd[7]+cmd[8]
message = f"{global_var.TEM}°C {global_var.HUM}%"
window['DHT11_O'].update(message)
except:
message = "ERROR"
window['DHT11_O'].update(message)
print("DHT11: message ERROR")
else:
message = "ERROR"
window['DHT11_O'].update(message)
print("DHT11: message ERROR")
# ds18b20
elif cmd[2] == '0' and cmd[3] == '6':
if cmd[4] == 'g':
try:
global_var.TEM=cmd[5]+cmd[6]
message = f"{global_var.TEM}°C"
window['DS18B20_O'].update(message)
except:
message = "ERROR"
window['DS18B20_O'].update(message)
print("DS18B20: message ERROR")
else:
message = "ERROR"
window['DS18B20_O'].update(message)
print("DS18B20: message ERROR")
# AT24C02
elif cmd[2] == '0' and cmd[3] == '7':
if cmd[4] == 'g':
try:
print(cmd[5:])
except:
message = "ERROR"
window['AT24C02_O'].update(message)
print("AT24C02: message ERROR")
elif cmd[4] == 'p':
pass
else:
message = "ERROR"
window['AT24C02_O'].update(message)
print("AT24C02: message ERROR")
#spi
elif cmd[2] == '0' and cmd[3] == '8':
print(cmd[4:])
# 处理事件
def event_handle(window, client_socket):
led = 0
# 事件循环
while True:
try:
cmd_handle(window)
event, values = window.read()
if event == 'input':
window['txbuff'].update(disabled=not values['input'])
elif event == 'send':
send_handle(window, client_socket, values)
elif event == 'Clean':
window['Output'].update(value='')
elif event == 'dht11':
window['DHT11_O'].update(value=' ')
set_tx_buf('dht11', 'g')
send_cmd(client_socket)
elif event == 'ds18b20':
window['DS18B20_O'].update(value=' ')
set_tx_buf('ds18b20', 'g')
send_cmd(client_socket)
elif event == 'Quit':
quit_handel(client_socket)
print(f"See you.............")
break
elif event is None:
print(f"xxxxxxxxxxxxxxxxxxxx")
break
elif event == 'LED':
if led % 2 == 0:
set_tx_buf('led','p1')
else:
set_tx_buf('led','p0')
led+=1
if led > 100:
led = 0
send_cmd(client_socket)
elif event == 'SR501':
set_tx_buf('sr501','g')
send_cmd(client_socket)
elif event == 'SR04':
set_tx_buf('sr04','g')
send_cmd(client_socket)
elif event == 'IRDA':
set_tx_buf('irda','g')
send_cmd(client_socket)
elif event == 'MOTOR':
motor_handel(window, client_socket, values)
elif event == 'AT24C02_R':
set_tx_buf('AT24C02','g')
send_cmd(client_socket)
elif event == 'AT24C02_W':
set_tx_buf('AT24C02','p'+values['txbuff'])
window['txbuff'].update(value='')
send_cmd(client_socket)
# 处理其他事件...
except Exception as e:
window.close()
print(f"An error occurred: {e}")
return 0
window.close()
return 0
def main():
# 创建GUI对象
window = show.show_window('DefaultNoMoreNagging')
# 尝试连接到服务器
client_socket = tcp.connect_to_server()
if client_socket is not None:
event_handle(window, client_socket)
if __name__ == '__main__':
main()
3、 修改server
case 7:
printf("AT24C02!!!\n");
if ('g' == cmd[4])
{
direction = direction_get;
}
else
{
direction = direction_put;
}
ret = at24c02_handle(direction, buf);
if (NOERROR == ret)
{
tx_buffer = buf;
}
else
{
tx_buffer = "@007e";
}
printf(">>>>>>%s\n",tx_buffer);
if (send(acceptfd, tx_buffer, strlen(tx_buffer), 0) < 0)
{
perror("send failed");
}
break;4、 修改driver_handele
/*
*author : xintianyu
*function : Handle at24c02 Settings
*date : 2024-4-22
-----------------------
author date modify
*/
int at24c02_handle(DIRECTION direction, char *data)
{
/*传入参数后面要做通用处理使用空指针*/
/*路径宏定义*/
char *device = "/dev/cebss_at24c02";
int ret = NOERROR;
static int fd;
char buf[100];
/* 打开文件 */
fd = open(device, O_RDWR);
if (fd == -1)
{
printf("can not open file %s\n", device);
return ERROR;
}
if (direction_put == direction)
{
ret = write(fd, data, strlen(data) + 1);
if (ret > 0)
{
sprintf(data,"@007p");
ret = NOERROR;
}
else
{
sprintf(data,"@007e");
printf("at24c02: PUT ERROR!!!\n");
ret = ERROR;
}
}
else if (direction_get == direction)
{
ret = read(fd, buf, 100);
if (ret > 0)
{
sprintf(data,"@007g%s", buf);
printf("data: %s\n", data);
ret = NOERROR;
}
else
{
sprintf(data,"@007e");
printf("at24c02: GET ERROR!!!\n");
ret = ERROR;
}
}
else
{
sprintf(data,"@007e");
printf("at24c02: CMD ERROR!!!\n");
}
return ret;
}5、 测试和提交
非易失性名不虚传。我上次写的world这次还在
写入也很完美。
git status
git add server/
git add driver/
git add client/client.py
git add client/global_var.py
git add client/show.py
git commit -m "【1】【duplicate】034——从GUI-＞Client-＞Server-＞driver实现读写EEPROM"
git push origin xintianyu
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
