看了半天event_stream模块的文档,不得要领,于是做了下测试,测试步骤如下:
- 准备opensips.cfg(在本文最后)
- 启动 `nc -l -v -p 9999`
- 启动opensips
- 用eyebeam向opensips注册
# event_stream默认参数
loadmodule "event_stream.so"
startup_route {
subscribe_event("E_UL_AOR_INSERT", "tcp:127.0.0.1:9999");
}
eyebeam注册成功后, nc得到的是:
{
"jsonrpc": "2.0",
"method": "E_UL_AOR_INSERT",
"params": {
"domain": "location",
"aor": "1001"
}
}
loadmodule "event_stream.so"
modparam("event_stream", "event_param", "opensips_event")
startup_route {
subscribe_event("E_UL_AOR_INSERT", "tcp:127.0.0.1:9999");
}
nc得到的是:
{
"jsonrpc": "2.0",
"method": "E_UL_AOR_INSERT",
"params": {
"opensips_event": "E_UL_AOR_INSERT",
"domain": "location",
"aor": "1001"
}
}
loadmodule "event_stream.so"
modparam("event_stream", "reliable_mode", 1)
modparam("event_stream", "event_param", "opensips_event")
startup_route {
subscribe_event("E_UL_AOR_INSERT", "tcp:127.0.0.1:9999");
}
nc得到的是:
{
"id": 1319139391,
"jsonrpc": "2.0",
"method": "E_UL_AOR_INSERT",
"params": {
"opensips_event": "E_UL_AOR_INSERT",
"domain": "location",
"aor": "1001"
}
}
同时opensips等nc reply
reliable_mode如果为0,表示仅仅是通知,为1则等reply
附opensips.cfg:
####### Global Parameters #########
/* uncomment the following lines to enable debugging */
#debug_mode=yes
log_level=3
xlog_level=3
stderror_enabled=no
syslog_enabled=yes
syslog_facility=LOG_LOCAL0
udp_workers=4
/* uncomment the next line to enable the auto temporary blacklisting of
not available destinations (default disabled) */
#disable_dns_blacklist=no
/* uncomment the next line to enable IPv6 lookup after IPv4 dns
lookup failures (default disabled) */
#dns_try_ipv6=yes
socket=udp:172.20.10.9:5060 # CUSTOMIZE ME
####### Modules Section ########
#set module path
mpath="/usr/local//lib64/opensips/modules/"
#### SIGNALING module
loadmodule "signaling.so"
#### StateLess module
loadmodule "sl.so"
#### Transaction Module
loadmodule "tm.so"
modparam("tm", "fr_timeout", 5)
modparam("tm", "fr_inv_timeout", 30)
modparam("tm", "restart_fr_on_each_reply", 0)
modparam("tm", "onreply_avp_mode", 1)
#### Record Route Module
loadmodule "rr.so"
/* do not append from tag to the RR (no need for this script) */
modparam("rr", "append_fromtag", 0)
#### MAX ForWarD module
loadmodule "maxfwd.so"
#### SIP MSG OPerationS module
loadmodule "sipmsgops.so"
#### FIFO Management Interface
loadmodule "mi_fifo.so"
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
modparam("mi_fifo", "fifo_mode", 0666)
#### HTTPD module
loadmodule "httpd.so"
modparam("httpd", "port", 8888)
#### USeR LOCation module
loadmodule "usrloc.so"
modparam("usrloc", "nat_bflag", "NAT")
modparam("usrloc", "working_mode_preset", "single-instance-no-db")
#### REGISTRAR module
loadmodule "registrar.so"
modparam("registrar", "tcp_persistent_flag", "TCP_PERSISTENT")
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)
#### ACCounting module
loadmodule "acc.so"
/* what special events should be accounted ? */
modparam("acc", "early_media", 0)
modparam("acc", "report_cancels", 0)
/* by default we do not adjust the direct of the sequential requests.
if you enable this parameter, be sure to enable "append_fromtag"
in "rr" module */
modparam("acc", "detect_direction", 0)
#### MI_HTTP module
loadmodule "mi_http.so"
loadmodule "event_stream.so"
# modparam("event_stream", "event_param", "opensips_event")
# modparam("event_stream", "reliable_mode", yes)
loadmodule "proto_udp.so"
####### Routing Logic ########
# main request routing logic
route{
if (!mf_process_maxfwd_header(10)) {
send_reply(483,"Too Many Hops");
exit;
}
if (has_totag()) {
# handle hop-by-hop ACK (no routing required)
if ( is_method("ACK") && t_check_trans() ) {
t_relay();
exit;
}
# sequential request within a dialog should
# take the path determined by record-routing
if ( !loose_route() ) {
# we do record-routing for all our traffic, so we should not
# receive any sequential requests without Route hdr.
send_reply(404,"Not here");
exit;
}
if (is_method("BYE")) {
# do accounting even if the transaction fails
do_accounting("log","failed");
}
# route it out to whatever destination was set by loose_route()
# in $du (destination URI).
route(relay);
exit;
}
# CANCEL processing
if (is_method("CANCEL")) {
if (t_check_trans())
t_relay();
exit;
}
# absorb retransmissions, but do not create transaction
t_check_trans();
if ( !(is_method("REGISTER") ) ) {
if (is_myself("$fd")) {
} else {
# if caller is not local, then called number must be local
if (!is_myself("$rd")) {
send_reply(403,"Relay Forbidden");
exit;
}
}
}
# preloaded route checking
if (loose_route()) {
xlog("L_ERR",
"Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
if (!is_method("ACK"))
send_reply(403,"Preload Route denied");
exit;
}
# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();
# account only INVITEs
if (is_method("INVITE")) {
do_accounting("log");
}
if (!is_myself("$rd")) {
append_hf("P-hint: outbound\r\n");
route(relay);
}
# requests for my domain
if (is_method("PUBLISH|SUBSCRIBE")) {
send_reply(503, "Service Unavailable");
exit;
}
if (is_method("REGISTER")) {
# store the registration and generate a SIP reply
if (!save("location"))
xlog("failed to register AoR $tu\n");
exit;
}
if ($rU==NULL) {
# request with no Username in RURI
send_reply(484,"Address Incomplete");
exit;
}
# do lookup with method filtering
if (!lookup("location", "method-filtering")) {
t_reply(404, "Not Found");
exit;
}
# when routing via usrloc, log the missed calls also
do_accounting("log","missed");
route(relay);
}
route[relay] {
# for INVITEs enable some additional helper routes
if (is_method("INVITE")) {
t_on_branch("per_branch_ops");
t_on_reply("handle_nat");
t_on_failure("missed_call");
}
if (!t_relay()) {
send_reply(500,"Internal Error");
}
exit;
}
branch_route[per_branch_ops] {
xlog("new branch at $ru\n");
}
onreply_route[handle_nat] {
xlog("incoming reply\n");
}
failure_route[missed_call] {
if (t_was_cancelled()) {
exit;
}
# uncomment the following lines if you want to block client
# redirect based on 3xx replies.
##if (t_check_status("3[0-9][0-9]")) {
##t_reply(404,"Not found");
## exit;
##}
}
startup_route {
#subscribe_event("E_MY_EVENT", "tcp:127.0.0.1:9999");
subscribe_event("E_UL_AOR_INSERT", "tcp:127.0.0.1:9999");
#subscribe_event("E_UL_AOR_DELETE", "tcp:127.0.0.1:9999");
}