实验三内容

实验要求如下：

 构建拓扑如下：

（1）在R1与R2之间设置单向pap认证：
        R1：

[R1]aaa
[R1-aaa]local-user hcip password cipher hcip //创建主认证方
[R1-aaa]local-user hcip service-type ppp //服务类型为ppp
[R1]interface s4/0/0
[R1-Serial4/0/0]ppp authentication-mode pap//接口调用

         R2:

[R2-Serial4/0/0]ppp pap local-user hcip password cipher hcip
[R2-Serial4/0/0]dis this
[V200R003C00]
#
interface Serial4/0/0
 link-protocol ppp
 ppp pap local-user hcip password cipher %$%$3wxhOwyynW=Adl1hjvJ>,"-\%$%$
 ip address 10.0.0.2 255.255.255.0 
#

(2) 在R2与R3之间启用chap双向认证
 

[R2]aaa
[R2-aaa]local-user hcip1 pass	
[R2-aaa]local-user hcip1 password cipher hcip1
[R2-aaa]local-user hcip1 service-type ppp
[R2-aaa]interface s4/0/1
[R2-Serial4/0/1]ppp authentication-mode chap
[R2-Serial4/0/1]dis this
[V200R003C00]
#
interface Serial4/0/1
 link-protocol ppp
 ppp authentication-mode chap 
 ip address 11.0.0.1 255.255.255.0 
#
return

[R3-Serial4/0/0]ppp chap user hcip1
[R3-Serial4/0/0]ppp chap password cipher hcip1
Jul 11 2023 15:02:45-08:00 R3 %%01IFNET/4/LINK_STATE(l)[28]:The line protocol PP
P on the interface Serial4/0/0 has entered the UP state.