华为vrp平台基础命令合集、登录命令

显示版本：display  version

显示时钟：display  clock

设置时钟：clockc  datetime 16:00:00  2021-04-22

显示历史命令：display history-command

显示二层所有接口信息：display interface

显示二层某个接口信息：display interface GE0/0/0

显示二层接口缩略信息：display interface brief

显示三层接口缩略信息：display ip interface brief（使用频率很高的）

显示当前模式下的配置：display this（使用频率很高的）

显示当前配置文件：display current-configuration

显示保存配置文件：display saved-configuration

保存配置：save

重启设备：reboot

 

修改登录标语: [R1]header shell information "welcome to R1"

配置接口ip：[R1] interface g0/0/0

                    [R1-g0/0/0]ip address 12.1.1.1/24

 

登录命令：

              1.本地password登录

                 [R1]user-interface console 0

                       authentication-mode password

                       set authentication password cipher/simple huawei

                       idle-time 1 15

              2.本地aaa登录

                [R1]user-interface console 0

                      authentication-mode aaa

                      idle-timeout 1 15

                [R1]aaa

                    [R1-aaa]local-user admin password cipher/simple huawei

                [R1-aaa]local-user admin service-type terminal

              3.vty远程登录

                 （1）vty密码认证

                            [R1]user-interface vty 0 4

                                  authentication-mode password

                                  set authentication password cipher huawei

                                           User privilige level 3

                                  idle-timeout 1 15

                （2）vty aaa认证

                                     [R1]user-interface vty 0 4

                                            authentication-mode aaa

                                          User privilige level 3

                                          idle-timeout 1 15

                                    [R1]aaa

                                    [R1-aaa]local-user admin password cipher/simple huawei

                                     [R1-aaa]local-user admin service-type telnet terminal

 

                                   在R2上面修改R1的配置：<R2>telnet (R1的接口ip地址，交换机则是vlanif接口的ip地址)