Vagrant安装多个CentOS7虚拟机

1. 创建集群目录、文件夹

$ mkdir k8s
$ cd k8s
$ mkdir k8s-master k8s-node1 k8s-node2

2. Vagrant安装centos7

分别在k8s-master k8s-node1 k8s-node2目录安装centos7，参考上一篇Vagrant安装centos7，按如下指令操作即可，K8s-master目录下安装：

$ cd ~/k8s/k8s-master
$ vagrant box add master ~/centos-7.0-x86_64.box
$ vagrant init master
$ vagrant up
$ vagrant ssh

K8s-node1目录下安装：

$ cd ~/k8s/k8s-node1
$ vagrant box add node1 ~/centos-7.0-x86_64.box
$ vagrant init node1
$ vagrant up
$ vagrant ssh

K8s-node2目录下安装：

$ cd ~/k8s/k8s-node2
$ vagrant box add node2 ~/Downloads/centos-7.0-x86_64.box
$ vagrant init node2
$ vagrant up
$ vagrant ssh

3. 修改Vagrantfile文件hostname，network

3.1进入k8s-master目录

$ vi Vagrantfile #k8s-master目录下

替换如下

config.vm.box = "master"
config.vm.hostname = "k8s-master"     
config.vm.network "private_network", type: "dhcp"

验证配置：

$ vagrant ssh
$ hostname  查看主机名
k8s-master
$ ifconfig -a 查看网络地址和参数
 inet 172.28.xxx.3 netmask 255.255.255.0 broadcast 172.28.xxx.255

3.2 进入k8s-node1目录

$ vi Vagrantfile

替换如下

config.vm.box = "node1"
config.vm.hostname = ""     
config.vm.network "private_network", type: "dhcp"

验证配置：

$ vagrant ssh
$ hostname  查看主机名
k8s-node1
$ ifconfig -a 查看网络地址和参数
 inet 172.28.xxx.4 netmask 255.255.255.0 broadcast 172.28.xxx.255

3.3 进入k8s-node2目录

$ vi Vagrantfile

替换如下

config.vm.box = "node2"
config.vm.hostname = "k8s-node2"     
config.vm.network "private_network", type: "dhcp"

验证配置：

$ vagrant ssh
$ hostname  查看主机名
K8s-node2
$ ifconfig -a 查看网络地址和参数
  inet 172.28.xxx.5 netmask 255.255.255.0 broadcast 172.28.xxx.255