nfs v3 test (by quqi99)

quqi99

已于 2022-12-28 22:26:00 修改

阅读量540

点赞数

分类专栏： nfs 文章标签： nfs

于 2021-08-28 17:22:46 首次发布

本文链接：https://blog.csdn.net/quqi99/article/details/119970641

版权

nfs 专栏收录该内容

1 篇文章 0 订阅

订阅专栏

作者：张华发表于：2021-08-28
版权声明：可以任意转载，转载时请务必以超链接形式标明文章原始出处和作者信息及本版权声明
(http://blog.csdn.net/quqi99 )

刚工作需要做了一个nfs v3的测试，记录一下。

# set up nfs v3 server
sudo apt-get install nfs-kernel-server -y
cat <<EOF | sudo tee -a /etc/exports
/nfs *(rw,sync,no_subtree_check)
EOF
sudo mkdir -p /nfs && sudo chown -R $USER /nfs/
sudo systemctl restart nfs-server

# set up nfs client
showmount -e node1
sudo mkdir -p /mnt/nfs && sudo chown -R $USER /mnt/nfs/
sudo mount -t nfs -o vers=3,proto=tcp,nolock node1:/nfs /mnt/nfs

# prepare backing file
mkdir -p /nfs/images && sudo cp -v /images/kvm/bionic.qcow2 /nfs/images/
chmod 777 /nfs/image/bionic.qcow2

# create two snapshots on the same backing file hosted in NFSv3 server
qemu-img create -f qcow2 -o backing_file=/mnt/nfs/image2/bionic.qcow2 /mnt/nfs/image2/bionic-snap.qcow2
chmod 777 /mnt/nfs/image2/bionic-snap.qcow2
qemu-img create -f qcow2 -o backing_file=/mnt/nfs/image2/bionic.qcow2 /mnt/nfs/image2/bionic-snap2.qcow2
chmod 777 /mnt/nfs/image2/bionic-snap2.qcow2

# create two test VMs with two snapshots

# run dd command on one VM, then restart another VM, but my both VMs run well so I didn't reproduce the problem.


do test with sparse file test with: dd if=/dev/zero of=flat2.img bs=1024k count=0 seek=2048

do test with non-sparse file test with: dd if=/dev/zero of=flat1.img bs=1024k count=1000

20210904更新 - 安装samba

买了个老母鸡(星客云)，安装了armbian,　但运行nfs有问题(无法启动nfs-idmapd)

nfs-idmapd.service: Job nfs-idmapd.service/start failed with result 'dependency'

尝试了很多方法无法解决，还是换成samba吧(在windows上直接设置共享文件夹即可，但这里是linux).
安装配置samba服务端如下：

sudo apt install samba samba-common
sudo chmod 777 /mnt/sda4

# modify smb.conf
root@OneCloud:~# grep -r 'security' /etc/samba/smb.conf -B1
   max log size = 1000
   security = user
root@OneCloud:~# cat /etc/samba/smb.conf |tail -n5

[global] 
read raw = Yes
write raw = Yes
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_RCVBUF=131072 SO_SNDBUF=131072
min receivefile size = 16384
use sendfile = true
aio read size = 16384
aio write size = 16384
max xmit = 65535
max connections = 0
deadtime = 0

[share]
  comment = sda4
  path = /mnt/sda4
  browseable = yes
  writeable = yes
  follow symlinks = no
  wide links = no
  aio read size = 16384
  aio write size = 16384
  aio write behind = true
  write cache size = 2097152
  max xmit = 65536
  large readwrite = yes

testparm
useradd hua
# use '-a' to avoid 'Failed to find entry for user root'
smbpasswd -a hua
systemctl restart smbd

配置samba客户端

# sudo mount -t cifs -o username=hua,password=password //storage/share /mnt/tmp/
# autofs
#/mnt/share    -fstype=cifs,rw,username=nfs,password=password,file_mode=0777,dir_mode=0777 ://win/share
mnt/share    -fstype=cifs,rw,username=hua,password=password,rw,rsize=61568,uid=1000,forceuid,gid=1000,forcegid,nounix,file_mode=0777,dir_mode=0777 ://storage/share

对于openwrt上的samba在client中映射出来的用户总是root (即使openwrt端不用root改用hua也是一样的), 在mount命令中添加’uid=1000,forceuid,gid=1000,forcegid’可映射到hua，但对autofs没效，后来发现原来是要添加nounix

opkg install shadow-common && opkg install shadow-useradd
# # use '-a' to avoid 'Failed to find entry for user root'
useradd hua && touch /etc/samba/smbpasswd && smbpasswd  -a hua

sudo mount -t cifs -o username=hua,password=password,uid=$(id -u),gid=$(id -g),forceuid,forcegid //192.168.99.190/share /mnt/share

# autofs
mnt/share    -fstype=cifs,rw,username=hua,password=password,rw,rsize=61568,uid=1000,forceuid,gid=1000,forcegid,nounix,file_mode=0777,dir_mode=0777 ://xiaoyu/share

20220331 - openwrt上运行samba

今天将samba server从armbian移到了openwrt上（samba4体积太大，所以安装samba3.6), 但之后连接它时出错．于是开始调试它．
之前用useradd定义了一个hua用户，并且使用smbpasswd给它设置了一个密码：

opkg install shadow-common && opkg install shadow-useradd && opkg install shadow-groupmod
useradd hua && touch /etc/samba/smbpasswd
# use '-a' to avoid 'Failed to find entry for user root'
smbpasswd  -a hua && groupmod -n smbgroups hua

发现可以运行：

smbclient -L //xiaoyu -U hua%password

但是不能运行：

# tree connect failed: NT_STATUS_ACCESS_DENIED
smbclient //xiaoyu/share -U hua%password -c "ls"

发现只能用root用户(server端记得将invalid users = root注释掉)：

# use '-a' to avoid 'Failed to find entry for user root'
smbpasswd  -a root
smbclient //xiaoyu/share -U root%password -c "ls"

之后发现仍然不能运行：

mount.cifs -o username=root,password=password //192.168.99.191/share/ /mnt/share

于是改到openwrt上来运行此命令，同时看dsmesg看到了下列错误：

No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), 
from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount

原来是openwrt上的samba最高只能使用2.0

mount.cifs -o username=root,password=password,vers=2.0 //192.168.99.191/share/ /mnt/share

这样继续也就OK了：

sudo mount -t cifs -o vers=2.0,username=root,password=password,uid=$(id -u),gid=$(id -g),forceuid,forcegid //192.168.99.191/share /mnt/share

autofs中的定义如下：

#smbpasswd root
/mnt/share    -fstype=cifs,rw,vers=2.0,username=root,password=password,rw,rsize=61568,uid=1000,forceuid,gid=1000,forcegid,nounix,file_mode=0777,dir_mode=0777 ://xiaoyu/share

我估计之前openwrt上的nfs不work也可能是和版本有关.
同时为了提升性能，在配置中添加了：

#invalid users = root
   follow symlinks = no
        wide links = no
        aio read size = 16384
        aio write size = 16384
        aio write behind = true
        write cache size = 2097152
        max xmit = 65536
        large readwrite = yes

完整配置如下：

root@OpenWrt:~# cat /etc/samba/smb.conf
[global]
	netbios name = xiaoyu 
	display charset = UTF-8
	interfaces = lo br-lan 
	server string = OpenWrt
	unix charset = UTF-8
	workgroup = WORKGROUP
	bind interfaces only = yes
	deadtime = 30
	enable core files = no
	#invalid users = root
	local master = yes
	map to guest = Bad User
	max protocol = SMB2
        #max protocol = SMB3
	min receivefile size = 16384
	null passwords = yes
	passdb backend = smbpasswd
	security = user
	smb passwd file = /etc/samba/smbpasswd
	socket options = TCP_NODELAY IPTOS_LOWDELAY
	use sendfile = yes
        # by quqi
        follow symlinks = no
        wide links = no
        aio read size = 16384
        aio write size = 16384
        aio write behind = true
        write cache size = 2097152
        max xmit = 65536
        large readwrite = yes
[homes]
	comment     = Home Directories
	browsable   = no
	read only   = no
	create mode = 0750

[share]
	path = /mnt/sda4
	valid users = root
	read only = no
	guest ok = yes
	create mask = 0777
	directory mask = 0666
	browseable = yes

2022031 - openwrt上nfs的问题

见：　https://www.right.com.cn/forum/thread-185602-1-1.html

oot@OpenWrt:~# mount.nfs -o vers=3,proto=tcp,nolock 192.168.99.191:/mnt/sda4 /mnt/share -v
mount.nfs: timeout set for Thu Mar 31 19:31:05 2022
mount.nfs: trying text-based options 'vers=3,proto=tcp,nolock,addr=192.168.99.191'
mount.nfs: prog 100003, trying vers=3, prot=6
mount.nfs: trying 192.168.99.191 prog 100003 vers 3 prot TCP port 2049
mount.nfs: prog 100005, trying vers=3, prot=6
mount.nfs: trying 192.168.99.191 prog 100005 vers 3 prot TCP port 32780

root@OpenWrt:~# logread  |tail -n1
Thu Mar 31 19:29:05 2022 daemon.notice rpc.mountd[8309]: authenticated mount request from 192.168.99.191:993 for /mnt/sda4 (/mnt/sda4)

netstat -lnput |grep 2049