详解keepalived配置和使用

于 2014-05-09 14:31:04 发布
阅读量765 收藏
点赞数
2013-09-28 21:20:46
标签： keepalived
原创作品，允许转载，转载时请务必以超链接形式标明文章 原始出处 、作者信息和本声明。否则将追究法律责任。 http://lanlian.blog.51cto.com/6790106/1303195

一、keepalived简介：

keepalived是一个类似于layer3, 4 & 5交换机制的软件，也就是我们平时说的第3层、第4层和第5层交换。Keepalived的作用是检测web服务器的状态，如果有一台web服务器死机，或工作出现故障，Keepalived将检测到，并将有故障的web服务器从系统中剔除，当web服务器工作正常后Keepalived自动将web服务器加入到服务器群中，这些工作全部自动完成，不需要人工干涉，需要人工做的只是修复故障的web服务器。


工作原理

211837606.png

Layer3,4&5工作在IP/TCP协议栈的IP层，TCP层，及应用层,原理分别如下：

Layer3：Keepalived使用Layer3的方式工作式时，Keepalived会定期向服务器群中的服务器发送一个ICMP的数据包（既我们平时用的Ping程序）,如果发现某台服务的IP地址没有激活，Keepalived便报告这台服务器失效，并将它从服务器群中剔除，这种情况的典型例子是某台服务器被非法关机。Layer3的方式是以服务器的IP地址是否有效作为服务器工作正常与否的标准。

Layer4:如果您理解了Layer3的方式，Layer4就容易了。Layer4主要以TCP端口的状态来决定服务器工作正常与否。如web server的服务端口一般是80，如果Keepalived检测到80端口没有启动，则Keepalived将把这台服务器从服务器群中剔除。

Layer5：Layer5就是工作在具体的应用层了，比Layer3,Layer4要复杂一点，在网络上占用的带宽也要大一些。Keepalived将根据用户的设定检查服务器程序的运行是否正常，如果与用户的设定不相符，则Keepalived将把服务器从服务器群中剔除。


二、实验步骤：

1.创建管理节点在node1上，建立双机互信node1和node2，然后同步时间，安装keepalived

1
2
3
4
[root@node1~] # ansible all -m yum -a 'name=keepalived state=present'
[root@node1keepalived] # rpm -qc keepalived
/etc/keepalived/keepalived .conf // 生成的主配置文件
/etc/sysconfig/keepalived


2.在node1上配置文件需要做一下修改

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
global_defs{
    notification_email {
         root@localhost         // 收邮件人，可以定义多个
    }
    notification_email_from kaadmin@localhost       // 发邮件人可以伪装
    smtp_server 127.0.0.1  // 发送邮件的服务器地址
    smtp_connect_timeout 30 // 连接超时时间
    router_id LVS_DEVEL       
}
vrrp_instanceVI_1 {    // 每一个vrrp_instance就是定义一个虚拟路由器的
     state MASTER       // 由初始状态状态转换为master状态
     interface eth0    
     virtual_router_id 51    // 虚拟路由的 id 号，一般不能大于255的
     priority 100    // 初始化优先级
     advert_int 1    // 初始化通告
     authentication {   // 认证机制
         auth_type PASS
         auth_pass 1111   // 密码
     }
     virtual_ipaddress {     // 虚拟地址vip
        172.16.2.8
     }
}

3.把配置文件复制到node2上一份，并修改初始状态和优先级

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
[root@node1keepalived] # scp keepalived.conf node2:/etc/keepalived/
[root@node2~] # cd /etc/keepalived/
[root@node2keepalived] # ls
keepalived.conf
[root@node2keepalived] # vim keepalived.conf
vrrp_instanceVI_1 {
     state BACKUP // 初始化状态
     interface eth0
     virtual_router_id 51
     priority 99      // 优先级，一定要比master的优先级要低
     advert_int 1
     authentication {
         auth_type PASS
         auth_pass 1111
     }
     virtual_ipaddress {
         172.16.2.8
     }
}

在node1上开始启动服务[root@node1 ~]# servicekeepalived start

然后检查ip地址

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
[root@node1~] # ip addr show
1:lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
     link /loopback 00:00:00:00:00:00 brd00:00:00:00:00:00
     inet 127.0.0.1 /8 scope host lo
     inet6 ::1 /128 scope host
        valid_lft forever preferred_lft forever
2:eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast stateUP qlen 1000
     link /ether 00:0c:29:4e:22:fb brdff:ff:ff:ff:ff:ff
   inet 172.16.2.1 /16 brd 172.16.255.255 scopeglobal eth0
     inet 172.16.2.8 /32 scopeglobal eth0
  inet 172.16.10.8 /16 brd 172.16.255.255 scopeglobal secondary eth0:0
     inet6 fe80::20c:29ff:fe4e:22fb /64 scopelink
        valid_lft forever preferred_lft forever
3:pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
     link /ether 2e:79:b3:b2:3e:31 brdff:ff:ff:ff:ff:ff

4.现在把node1的keepalived停掉

[root@node1keepalived]# service keepalived stop

Stoppingkeepalived: [ OK ]

验证node2是否把virtual_ipaddress拿走

1
2
3
4
5
6
7
8
9
10
11
12
13
14
[root@node2~] # ip addr show
1:lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
     link /loopback 00:00:00:00:00:00 brd00:00:00:00:00:00
     inet 127.0.0.1 /8 scope host lo
     inet6 ::1 /128 scope host
        valid_lft forever preferred_lft forever
2:eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast stateUP qlen 1000
     link /ether 00:0c:29:74:c7:7b brdff:ff:ff:ff:ff:ff
     inet 172.16.2.16 /16 brd172.16.255.255 scope global eth0
     inet 172.16.2.8 /32 scopeglobal eth0
     inet6 fe80::20c:29ff:fe74:c77b /64 scopelink
        valid_lft forever preferred_lft forever
3:pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link /ether0a :b1:ef:7b:93:18 brd ff:ff:ff:ff:ff:ff

验证成功


可以在配置文件中手动通过vrrp_script定义一个外围的检测机制，并在vrrp_instance中通过定义track_script来追踪脚本执行过程，实现节点转移

实验测试在/etc/keepalived/keepalived.conf中做一下修改

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
global_defs{
    notification_email {
         root@localhost
    }
    notification_email_from kaadmin@localhost
    smtp_server 127.0.0.1
    smtp_connect_timeout 30
    router_id LVS_DEVEL
}
vrrp_script chk_maintainace { // 检测机制的脚本名称为chk_maintainace
         script "[[ -e/etc/keepalived/down ]] && exit 1 || exit 0" // 可以是个脚本路径，也可以是脚本命令
         interval 1 // 每隔1秒中检测一次
         weight -2 // 优先级减2
}
vrrp_instanceVI_1 {
     state MASTER
     interface eth0
     virtual_router_id 51
     priority 100
     advert_int 1
     authentication {
         auth_type PASS
         auth_pass 1111
     }
     virtual_ipaddress {
         172.16.2.8
     }
    track_script { // 调用外围脚本，追踪外围脚本执行过程
         chk_maintainace
}
}
[root@node1 keepalived] # touch down //在node1上创建down文件
[root@node1 keepalived] # ls
down  keepalived.conf  keepalived.conf.bak

在node2上做同样的操作，但不创建down文件，之后一起重启服务

1
2
3
4
5
6
7
[root@node1 keepalived] # ansible all -m shell -a 'service keepalivedrestart'
node2.magedu.com| success | rc=0 >>
Stoppingkeepalived: [FAILED]
Startingkeepalived: [  OK  ]
node1.magedu.com| success | rc=0 >>
Stoppingkeepalived: [  OK  ]
Startingkeepalived: [  OK  ]

进行检测

1
2
3
4
5
6
7
8
9
10
11
12
13
14
[root@node2keepalived] # ip addr show
1:lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
     link /loopback 00:00:00:00:00:00 brd00:00:00:00:00:00
     inet 127.0.0.1 /8 scope host lo
     inet6 ::1 /128 scope host
        valid_lft forever preferred_lft forever
2:eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast stateUP qlen 1000
     link /ether 00:0c:29:74:c7:7b brdff:ff:ff:ff:ff:ff
     inet 172.16.2.16 /16 brd172.16.255.255 scope global eth0
     inet 172.16.2.8 /32 scopeglobal eth0
     inet6 fe80::20c:29ff:fe74:c77b /64 scopelink
        valid_lft forever preferred_lft forever
3:pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link /ether0a :b1:ef:7b:93:18 brd ff:ff:ff:ff:ff:ff

此时将node1中/etc/keepalived/下的down删除，进行查看

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
[root@node1keepalived] # ls
down  keepalived.conf  keepalived.conf.bak
[root@node1keepalived] # rm down
rm :remove regular empty file `down'? y
[root@node1keepalived] # ls
keepalived.conf  keepalived.conf.bak
  [root@node1 keepalived] # ip addr show
1:lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
     link /loopback 00:00:00:00:00:00 brd00:00:00:00:00:00
     inet 127.0.0.1 /8 scope host lo
     inet6 ::1 /128 scope host
        valid_lft forever preferred_lft forever
2:eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast stateUP qlen 1000
     link /ether 00:0c:29:4e:22:fb brdff:ff:ff:ff:ff:ff
    inet 172.16.2.1 /16 brd 172.16.255.255 scopeglobal eth0
     inet 172.16.2.8 /32 scopeglobal eth0
     inet 172.16.10.8 /16 brd 172.16.255.255scope global secondary eth0:0
     inet6 fe80::20c:29ff:fe4e:22fb /64 scopelink
        valid_lft forever preferred_lft forever
3:pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link /ether0a :bd:4f:a9:ed:67 brd ff:ff:ff:ff:ff:ff

验证成功


三、详细介绍以下四个功能实现操作

1.如何在状态转换时进行通知？

2.如何配置Ipvs?

3.如何对某特定服务做高可用

4.如何实现基于多虚拟路由的master/master模型？


1.要在状态转换是进行通知，需要定义通知脚本可以在

vrrp_sync_group{

}中定义，也可以在

vrrp_instance{

｝中定义

通过man keepalived命令可以查看通知脚本定义的两种方法

第一种

# to MASTER transition

notify_master /path/to_master.sh

# to BACKUP transition

notify_backup /path/to_backup.sh

# FAULT transition

notify_fault "/path/fault.sh VG_1"

第二种

#arguments

# $1 ="GROUP"|"INSTANCE"

# $2 = name of group or instance

# $3 = target state of transition

# ("MASTER"|"BACKUP"|"FAULT")

notify /path/notify.sh


例如：

转换为MASTER的状态通知

1
2
3
4
5
6
7
8
9
10
11
#!/bin/bash
#
vip=172.16.2.8
contact= 'root@localhost'
thisip=`ifconfigeth0 | awk '/inet addr:/{print $2}' | awk -F: '{print $2}' `
notify(){
       mailbody= "vrrp transaction, $vipfloated to $thisip."
       subject= "$thisip is to be $vipmaster"
       echo $mailbody | mail -s $subject $contact
}
notify

其他状态转换类似

下面用一个脚本notify.sh实现状态转换通知的简单示例：

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
#!/bin/bash
#Author: MageEdu <linuxedu@foxmail.com>
#description: An example of notify script
#
vip=172.16.2.8
contact= 'root@localhost'
notify(){
     mailsubject= "`hostname` to be $1: $vipfloating"
     mailbody= "`date '+%F %H:%M:%S'`: vrrptransition, `hostname` changed to be $1"
     echo $mailbody | mail -s "$mailsubject" $contact
}
case "$1" in
     master)
         notify master
         exit 0
     ;;
     backup)
         notify backup
         exit 0
     ;;
     fault)
         notify fault
         exit 0
     ;;
     *)
         echo 'Usage: `basename $0`{master|backup|fault}'
         exit 1
     ;;
esac

进行测试

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
[root@node1keepalived] # ./notify.sh backup
[root@node1keepalived] # mail
HeirloomMail version 12.4 7 /29/08 .  Type ? forhelp.
"/var/spool/mail/root" :6 messages 1 new 6 unread
  U  1centos@stu2.magedu.c  Sat Aug 1709:34  17 /644   "*** SECURITY"
  U  2Cron Daemon           Tue Aug 2700:01  22 /747   "Cron <root@s"
  U  3Cron Daemon           Fri Aug 3000:01  22 /747   "Cron <root@s"
  U  4Mail Delivery System  Fri Aug 3017:42  91 /2751  "Undelivered "
  U  5Cron Daemon           Tue Sep  3 00:01 22 /747   "Cron<root@s"
>N  6 root                  Thu Sep 26 21:19  18 /700  "node1.magedu"
&6
Message  6:
Fromroot@node1.magedu.com  Thu Sep 2621:19:32 2013
Return-Path:<root@node1.magedu.com>
X-Original-To:root@localhost
Delivered-To:root@localhost.magedu.com
Date:Thu, 26 Sep 2013 21:19:32 +0800
To:root@localhost.magedu.com
Subject:node1.magedu.com to be backup: 172.16.2.8 floating
User-Agent:Heirloom mailx 12.4 7 /29/08
Content-Type:text /plain ; charset=us-ascii
From:root@node1.magedu.com (root)
Status:R
2013-09-26 21:19:32: vrrp transition, node1.magedu.com changed to bebackup
&quit
Held6 messages in /var/spool/mail/root
Youhave mail in /var/spool/mail/root

通过传参数master|backup|fault验证都可以成功

在配置文件keepalived.conf中进行脚本调用

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
vrrp_instanceVI_1 {
     state MASTER
     interface eth0
     virtual_router_id 51
     priority 100
     advert_int 1
     authentication {
         auth_type PASS
         auth_pass 1111
     }
     virtual_ipaddress {
         172.16.2.8
     }
    track_script {
         chk_maintainace
}
   notify_master "/etc/keepalived/notify.shmaster"
    notify_backup "/etc/keepalived/notify.sh backup"
    notify_fault "/etc/keepalived/notify.sh fault"
}

为node2提供同样的配置然后进行测试

[root@node1keepalived]# ls

down keepalived.conf keepalived.conf.bak notify.sh

[root@node1keepalived]# rm -f down

[root@node1keepalived]# mail

>N18 root Thu Sep 2621:57 18/700 "node1.magedu.comto be master: 172.16.2.8 floating"截取了一条

验证都可以成功


2、如何配置ipvs

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
virtual_server172.16.2.8 80{
     delay_loop 6
     lb_algo rr
     lb_kind NAT
     nat_mask 255.255.0.0
     persistence_timeout 0
     protocol TCP
#
     real_server 172.16.2.1 80 {
         weight 1
         HTTP_GET {
             url {
               path /
       state_code 200
             }
             connect_timeout 3
             nb_get_retry 3
             delay_before_retry 3
         }
     }
     real_server 172.16.2.16 80 {
         weight 1
         HTTP_GET {
             url {
               path /
       state_code 200
             }
             connect_timeout 3
             nb_get_retry 3
             delay_before_retry 3
         }
}
}

在node2上做同样的修改，启动httpd服务,keepalived能自动生成规则，然后查看ipvsadm规则

1
2
3
4
5
6
7
[root@node1keepalived] # ipvsadm -L -n
IPVirtual Server version 1.2.1 (size=4096)
ProtLocalAddress:Port Scheduler Flags
   -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  172.16.2.8:80 rr
   -> 172.16.2.1:80                Local   1     0          0       
   -> 172.16.2.16:80               Masq    1     0          0

3、如何对某特定服务做高可用？以nginx为例进行讲解

在两个节点上安装nginx

[root@node1~]# ansible all -m yum -a 'name=nginx state=present'

启动nginx服务，启动之前注意要停止httpd服务

1
2
3
4
5
[root@node1~] # ansible all -m shell -a 'service nginx start'
node2.magedu.com| success | rc=0 >>
Startingnginx: [  OK  ]
node1.magedu.com| success | rc=0 >>
Startingnginx: [  OK  ]

对node1和node2中/etc/keepalived/下的notify.sh脚本进行修改

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
#!/bin/bash
#Author: MageEdu <linuxedu@foxmail.com>
#description: An example of notify script
#
vip=172.16.2.8
contact= 'root@localhost'
notify(){
     mailsubject= "`hostname` to be $1: $vipfloating"
     mailbody= "`date '+%F %H:%M:%S'`: vrrptransition, `hostname` changed to be $1"
     echo $mailbody | mail -s "$mailsubject" $contact
}
case "$1" in
     master)
         notify master
       /etc/rc .d /init .d /nginx start
         exit 0
     ;;
     backup)
         notify backup
       /etc/rc .d /init .d /nginx stop
         exit 0
     ;;
     fault)
         notify fault
       /etc/rc .d /init .d /nginx stop
         exit 0
     ;;
     *)
         echo 'Usage: `basename $0`{master|backup|fault}'
         exit 1
     ;;
esac

然后启动keepalived服务，可以看到在node1上80端口开始启用

[root@node1keepalived]# ss -tanl | grep :80

LISTEN 0 128 *:80 *:*

然后在/etc/keepalive/下创建down文件，看nginx服务是否可以转移到node2上

1
2
3
4
5
6
7
8
[root@node1keepalived] # ls
keepalived.conf  keepalived.conf.bak  notify.sh
[root@node1keepalived] # touch down
[root@node1keepalived] # ss -tanl | grep :80
[root@node1keepalived] #
在node2上进行查看
[root@node2keepalived] # ss -tanl | grep :80
LISTEN     0     128                      *:80                       *:*

验证成功，说明实现了nginx的高可用服务

总结：要对某特定服务做高可用有两个要点

一是：要提供监控服务脚本

二是：在vrrp实例中追踪服务

修改配置文件keepalived.conf

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
vrrp_script chk_nginx {
         script "killall -0 nginx"
         interval 1
         weight -2
}
vrrp_instanceVI_1 {
     state MASTER
     interface eth0
     virtual_router_id 51
     priority 100
     advert_int 1
     authentication {
         auth_type PASS
         auth_pass 1111
     }
     virtual_ipaddress {
         172.16.2.8
     }
    track_script {
         chk_maintainace
       chk_nginx
}

在node2上做同样的修改

测试：

[root@node2keepalived]# killall nginx

Youhave new mail in /var/spool/mail/root

[root@node2keepalived]# ss -tanl | grep :80

[root@node2keepalived]#

在node1上

[root@node1keepalived]# ss -tanl | grep :80

LISTEN 0 128 *:80 *:*

验证成功

4、如何实现基于多虚拟路由的master/master模型？

要实现双主模型需要定义两个vrrp_instance，在node1的配置文件中要一下修改：

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
vrrp_instanceVI_1 {
     state MASTER
     interface eth0
     virtual_router_id 51
     priority 100
     advert_int 1
     authentication {
         auth_type PASS
         auth_pass 1111
     }
     virtual_ipaddress {
       172.16.2.8
     }
    track_script {
       chk_maintainace
       chk_nginx
}   
    notify_master "/etc/keepalived/notify.sh master"
    notify_backup "/etc/keepalived/notify.shbackup"
    notify_fault "/etc/keepalived/notify.shfault"
}
vrrp_instance VI_2 {
     state BACKUP
     interface eth0
     virtual_router_id 55
     priority 99
     advert_int 1
     authentication {
         auth_type PASS
         auth_pass 2111
     }
     virtual_ipaddress {
         172.16.2.18
     }
    track_script {
         chk_maintainace
         chk_nginx
}
    notify_master "/etc/keepalived/notify.sh master"
    notify_backup "/etc/keepalived/notify.sh backup"
    notify_fault "/etc/keepalived/notify.shfault"
}

在node2上做同样的修改，重启keepalived，进行测试

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
[root@node1keepalived] # service nginx status
nginx(pid  28688) is running...
[root@node1keepalived] # ip addr show
1:lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
     link /loopback 00:00:00:00:00:00 brd00:00:00:00:00:00
     inet 127.0.0.1 /8 scope host lo
     inet6 ::1 /128 scope host
        valid_lft forever preferred_lft forever
2:eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast stateUP qlen 1000
     link /ether 00:0c:29:4e:22:fb brdff:ff:ff:ff:ff:ff
    inet 172.16.2.1 /16 brd 172.16.255.255 scopeglobal eth0
     inet 172.16.2.8 /32 scopeglobal eth0
     inet 172.16.10.8 /16 brd 172.16.255.255scope global secondary eth0:0
     inet6 fe80::20c:29ff:fe4e:22fb /64 scopelink
        valid_lft forever preferred_lft forever
3:pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
     link /ether 6a:7a:4f:e0:c1:8a brdff:ff:ff:ff:ff:ff
Youhave new mail in /var/spool/mail/root

在node2上

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
[root@node2keepalived] # service nginx start
Startingnginx:                                           [  OK  ]
[root@node2keepalived] # ip addr show
1:lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
     link /loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
     inet 127.0.0.1 /8 scope host lo
     inet6 ::1 /128 scope host
        valid_lft forever preferred_lft forever
2:eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast stateUP qlen 1000
     link /ether 00:0c:29:74:c7:7b brd ff:ff:ff:ff:ff:ff
     inet 172.16.2.16 /16 brd172.16.255.255 scope global eth0
     inet 172.16.2.18 /32 scopeglobal eth0
     inet6 fe80::20c:29ff:fe74:c77b /64 scopelink
        valid_lft forever preferred_lft forever
3:pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link /ether3a :4e:e8:4c:57:04 brd ff:ff:ff:ff:ff:ff
让node2的keepalived停掉，查看地址是否发生转移
[root@node1keepalived] # ip addr show
1:lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
     link /loopback 00:00:00:00:00:00 brd00:00:00:00:00:00
     inet 127.0.0.1 /8 scope host lo
     inet6 ::1 /128 scope host
        valid_lft forever preferred_lft forever
2:eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast stateUP qlen 1000
     link /ether 00:0c:29:4e:22:fb brd ff:ff:ff:ff:ff:ff
     inet 172.16.2.1 /16 brd172.16.255.255 scope global eth0
     inet 172.16.2.8 /32 scopeglobal eth0
     inet 172.16.2.18 /32 scopeglobal eth0
     inet 172.16.10.8 /16 brd 172.16.255.255scope global secondary eth0:0
     inet6 fe80::20c:29ff:fe4e:22fb /64 scopelink
        valid_lft forever preferred_lft forever
3:pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
     link /ether 6a:7a:4f:e0:c1:8a brdff:ff:ff:ff:ff:ff
Youhave new mail in /var/spool/mail/root

验证成功

总结：以上是我操作的过程，不足之处多多指点！！

本文出自 “时光的印记” 博客，请务必保留此出处http://lanlian.blog.51cto.com/6790106/1303195

rain_88
关注
  • 0
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值