ble学习笔记二-----------------点亮led

-----------------点亮led

创建iar工程

打开iar-->project--->creadtnew project--->创建空的8051工程(LED)--->添加LED.c文件

File--->save workspace as --->取名为LED

工程右击-->options配置界面

配置cpu:

配置编译输出的文件格式

首先看原理图

可认看到LED1和LED2分别接的是p1-0和p1-1

再查看用户手册

Register Name SFR Address ModuleDescription

P1SEL 0xF4 IOC Port 1 function select

可以看出当p1有0-7位,当把某一位设为设为0时, 为输入输出功能

如果将p1-0和p1-1设为输入输出功能,即将最后两位设为0

0xF4转换为二进制为 1111 0100

P1SEL &=~0x03;

0x03转换为二进制为0000 0011 取返为1111 1100

然后再与上1111 0100得到1111 0100

位运算的知识

按位与运算全1为1

按位或运算全0为0

异或运算相同为0,不同为1

取反运算

左移<< 相当于*2

右移>> 相当于/2

以上可以看出p1DIR是用来定义方向(0是输入,1是输出)

配置完成,编写代码:

/******************************************************************************

版权所有 (C), 2013-2020

******************************************************************************

文 件 名: LED.c

版 本 号: V1.0

作者 :retacn

生成日期 : 2014年9月2日

功能描述 : 点亮一个LED

函数列表 :

main

修改历史 :

1.日期 : 2014年9月2日

作者 :retacn

修改内容 : 创建文件

******************************************************************************/

/*----------------------------------------------*

* 包含头文件 *

*----------------------------------------------*/

#include <ioCC2540.h>

/*****************************************************************************

函 数 名: main

功能描述: 主函数，C程序入口

输入参数: void

输出参数: 无

返 回 值:

修改历史 :

1.日期 : 2014年9月2日

作者 :retacn

修改内容 : 创建

*****************************************************************************/

int main(void)

{

P1SEL &= ~0X03; // 将P1.1、0设置为IO功能

P1DIR |= 0X03; // 设置P1.1、0为输出功能

P1 &= ~0X03; // 清除原始值

P1 |= 0X03; // 设置P1.1、0输出高电平

while(1); // 无限等待

return 0;

}

/*end file*/

编译下载到开发板

注:程序中导入的iocc2540.h位于以下目录中

C:\Program Files (x86)\IAR Systems\EmbeddedWorkbench 6.5\8051\inc

内容如下:

/**************************************************************************************************

* -ioCC2540.h -

*

* Header file with definitions for the TexasInstruments CC2540 low-power System-on-Chip:

* an 8051-based MCU with 2.4 GHz Bluetooth lowenergy RF transceiver, and up to 256 kB FLASH.

*

* This file supports the IAR EmbeddedWorkbench for 8051.

*

**************************************************************************************************

*/

#ifndef IOCC2540_H

#define IOCC2540_H

/*------------------------------------------------------------------------------------------------

* CompilerAbstraction

*------------------------------------------------------------------------------------------------

*/

#ifdef__IAR_SYSTEMS_ICC__

#pragmalanguage=save

#pragmalanguage=extended

#defineSFR(name,addr) __sfr __no_initvolatile unsigned char name @ addr;

#defineSFRBIT(name, addr, bit7, bit6, bit5, bit4, bit3, bit2, bit1, bit0) \

__sfr __no_initvolatile union \

{ \

unsigned char name; \

struct { \

unsigned char bit0 : 1; \

unsigned char bit1 : 1; \

unsigned char bit2 : 1; \

unsigned char bit3 : 1; \

unsigned char bit4 : 1; \

unsigned char bit5 : 1; \

unsigned char bit6 : 1; \

unsigned char bit7 : 1; \

}; \

} @ addr;

#defineSBIT(name,addr) /* not in use for IAR C Compiler */

#defineXREG(addr) ((unsigned char volatile__xdata *) 0)[addr]

#definePXREG(addr) ((unsigned char volatile__xdata *) addr)

#defineVECT(num,addr) addr

#elif defined__IAR_SYSTEMS_ASM__

#defineSFR(name,addr) name DEFINEaddr

SFRBITMACRO MACROt, addr, bit7 , bit6, bit5, bit4, bit3, bit2, bit1, bit0

t DEFINE addr

bit7 DEFINE addr.7

bit6 DEFINE addr.6

bit5 DEFINE addr.5

bit4 DEFINEaddr.4 ;; NB: do not modifyindentation of this macro

bit3 DEFINE addr.3

bit2 DEFINE addr.2

bit1 DEFINE addr.1

bit0 DEFINE addr.0

ENDM

#defineSFRBIT(name, addr, bit7, bit6, bit5, bit4, bit3, bit2, bit1, bit0) \

SFRBITMACRO <name>, <addr>,<bit7>, <bit6>, <bit5>, <bit4>, <bit3>,<bit2>, <bit1>, <bit0>

#defineSBIT(name,addr) name DEFINEaddr

#defineXREG(addr) addr

#definePXREG(addr) addr

#defineVECT(num,addr) addr

/* IAR assembleruses some predefined registers. The following prevents name collisions. */

#define SP SPx

#define ACC ACCx

#define B Bx

#define PSW PSWx

#define CY CYx

#define AC ACx

#define F0 F0x

#define RS1 RS1x

#define RS0 RS0x

#define OV OVx

#define P Px

#else

#error"Unrecognized compiler."

#endif

/*------------------------------------------------------------------------------------------------

* 中断导航Interrupt Vectors

*------------------------------------------------------------------------------------------------

*/

#define RFERR_VECTORVECT( 0, 0x03 ) /* RFTX FIFO Underflow and RX FIFO Overflow*/

#define ADC_VECTORVECT( 1, 0x0B ) /*ADC End of Conversion */

#define URX0_VECTORVECT( 2, 0x13 ) /*USART0 RX Complete */

#define URX1_VECTORVECT( 3, 0x1B ) /*USART1 RX Complete */

#define ENC_VECTORVECT( 4, 0x23 ) /*AES Encryption/Decryption Complete */

#define ST_VECTORVECT( 5, 0x2B ) /*Sleep Timer Compare */

#define P2INT_VECTORVECT( 6, 0x33 ) /*Port 2 Inputs and USB */

#define UTX0_VECTORVECT( 7, 0x3B ) /*USART0 TX Complete */

#define DMA_VECTORVECT( 8, 0x43 ) /*DMA Transfer Complete */

#define T1_VECTORVECT( 9, 0x4B ) /*Timer 1 (16-bit) Capture/Compare/Overflow */

#define T2_VECTORVECT( 10, 0x53 ) /* Timer 2 (MAC Timer) */

#define T3_VECTORVECT( 11, 0x5B ) /* Timer 3 (8-bit) Capture/Compare/Overflow */

#define T4_VECTORVECT( 12, 0x63 ) /* Timer 4 (8-bit) Capture/Compare/Overflow */

#define P0INT_VECTORVECT( 13, 0x6B ) /* Port 0 Inputs */

#define UTX1_VECTORVECT( 14, 0x73 ) /*USART1 TX Complete */

#define P1INT_VECTORVECT( 15, 0x7B ) /* Port 1 Inputs */

#define RF_VECTORVECT( 16, 0x83 ) /* RF General Interrupts */

#define WDT_VECTORVECT( 17, 0x8B ) /* Watchdog Overflow in Timer Mode */

/*------------------------------------------------------------------------------------------------

* InterruptAlias

* ------------------------------------------------------------------------------------------------

*/

#define USB_VECTORP2INT_VECTOR /* USB Interruptvector, alias for P2INT_VECTOR */

/*------------------------------------------------------------------------------------------------

* SFR BitAlias

*------------------------------------------------------------------------------------------------

*/

#define USBIFP2IF /* USB Interrupt Flag */

/* USBIEP2IE , not in a bit addressable register */

/*------------------------------------------------------------------------------------------------

* SFRs

*------------------------------------------------------------------------------------------------

*/

/*

* SFRswith an address ending with 0 or 8 are bit accessible.

* Theyare defined with the SFRBIT() macro that sets the name of each bit.

*/

/* Port 0*/

SFRBIT( P0, 0x80, P0_7, P0_6, P0_5, P0_4,P0_3, P0_2, P0_1, P0_0 )

SFR( SP, 0x81 )/* Stack Pointer */

SFR( DPL0, 0x82 )/* Data Pointer 0 Low Byte */

SFR( DPH0, 0x83 )/* Data Pointer 0 High Byte */

SFR( DPL1, 0x84 )/* Data Pointer 1 Low Byte */

SFR( DPH1, 0x85 )/* Data Pointer 1 High Byte */

SFR( U0CSR, 0x86 )/* USART 0 Control andStatus */

SFR( PCON, 0x87 )/* Power Mode Control */

/* InterruptFlags*/

SFRBIT( TCON, 0x88, URX1IF, _TCON6, ADCIF,_TCON4, URX0IF, IT1, RFERRIF, IT0 )

SFR( P0IFG, 0x89 )/* Port 0 Interrupt StatusFlag */

SFR( P1IFG, 0x8A )/* Port 1 Interrupt StatusFlag */

SFR( P2IFG, 0x8B )/* Port 2 Interrupt StatusFlag */

SFR( PICTL, 0x8C )/* Port Interrupt Control */

SFR( P1IEN, 0x8D )/* Port 1 Interrupt Mask */

SFR( _SFR8E, 0x8E )/* not used */

SFR( P0INP, 0x8F )/* Port 0 Input Mode */

/* Port 1*/

SFRBIT( P1, 0x90, P1_7, P1_6, P1_5, P1_4,P1_3, P1_2, P1_1, P1_0 )

SFR( _SFR91, 0x91 )/* reserved */

SFR( DPS, 0x92 )/* Data Pointer Select */

SFR( MPAGE, 0x93 )/* Memory Page Select */

SFR( T2CTRL, 0x94 )/* Timer2 Control Register */

SFR( ST0, 0x95 )/* Sleep Timer 0 */

SFR( ST1, 0x96 )/* Sleep Timer 1 */

SFR( ST2, 0x97 )/* Sleep Timer 2 */

/* Interrupt Flags 2*/

SFRBIT( S0CON, 0x98, _S0CON7, _S0CON6,_S0CON5, _S0CON4, _S0CON3, _S0CON2, ENCIF_1, ENCIF_0 )

SFR( _SFR99,0x99 ) /*reserved*/

SFR( IEN2, 0x9A )/* Interrupt Enable 2 */

SFR( S1CON, 0x9B )/* Interrupt Flags 3 */

SFR( T2CSPCFG, 0x9C )/* Timer2 CSP InterfaceConfiguration (legacy name) */

SFR( T2EVTCFG, 0x9C )/* Timer2 Event OutputConfiguration */

SFR( SLEEPSTA, 0x9D )/* Sleep Status */

SFR( CLKCONSTA ,0x9E ) /*Clock Control Status */

SFR( FMAP, 0x9F )/* Flash Bank Map */

/* Port 2*/

SFRBIT( P2, 0xA0, _P2_7, _P2_6, _P2_5,P2_4, P2_3, P2_2, P2_1, P2_0 )

SFR( T2IRQF, 0xA1 ) /*Timer2 Interrupt Flags */

SFR( T2M0, 0xA2 ) /*Timer2 Multiplexed Register 0 */

SFR( T2M1, 0xA3 ) /*Timer2 Multiplexed Register 1 */

SFR( T2MOVF0, 0xA4 ) /*Timer2 Multiplexed Overflow Register 0 */

SFR( T2MOVF1, 0xA5 ) /*Timer2 Multiplexed Overflow Register 1 */

SFR( T2MOVF2, 0xA6 ) /*Timer2 Multiplexed Overflow Register 2 */

SFR( T2IRQM, 0xA7 ) /*Timer2 Interrupt Mask */

/* Interrupt Enable0*/

SFRBIT( IEN0, 0xA8, EA, _IEN06, STIE, ENCIE,URX1IE, URX0IE, ADCIE, RFERRIE )

SFR( IP0, 0xA9 )/* Interrupt Priority 0 */

SFR( _SFRAA, 0xAA )/* not used */

SFR( P0IEN, 0xAB )/* Port 0 Interrupt Mask */

SFR( P2IEN, 0xAC )/* Port 2 Interrupt Mask */

SFR( STLOAD, 0xAD )/* Sleep Timer Load Status */

SFR( PMUX, 0xAE )/* Power Down Signal MUX */

SFR( T1STAT, 0xAF )/* Timer 1 Status */

SFR( _SFRB0, 0xB0 )/* not used */

SFR( ENCDI, 0xB1 )/* Encryption/Decryption InputData */

SFR( ENCDO, 0xB2 )/* Encryption/Decryption OutputData */

SFR( ENCCS, 0xB3 )/* Encryption/Decryption Controland Status */

SFR( ADCCON1, 0xB4 )/* ADC Control 1 */

SFR( ADCCON2, 0xB5 )/* ADC Control 2 */

SFR( ADCCON3, 0xB6 )/* ADC Control 3 */

SFR( _SFRB7, 0xB7 )/* reserved */

/* Interrupt Enable 1*/

SFRBIT( IEN1, 0xB8, _IEN17, _IEN16, P0IE, T4IE,T3IE, T2IE, T1IE, DMAIE )

SFR( IP1, 0xB9 )/* Interrupt Priority 1 */

SFR( ADCL, 0xBA )/* ADC Data Low */

SFR( ADCH, 0xBB )/* ADC Data High */

SFR( RNDL, 0xBC )/* Random Number Generator LowByte */

SFR( RNDH, 0xBD )/* Random Number Generator HighByte */

SFR( SLEEPCMD, 0xBE )/* Sleep Mode ControlCommand */

SFR( _SFRBF, 0xBF )/* reserved */

/* Interrupt Flags 4*/

SFRBIT( IRCON, 0xC0, STIF, _IRCON6, P0IF,T4IF, T3IF, T2IF, T1IF, DMAIF )

SFR( U0DBUF, 0xC1 )/* USART 0 Receive/Transmit DataBuffer */

SFR( U0BAUD, 0xC2 )/* USART 0 Baud Rate Control */

SFR( T2MSEL, 0xC3 )/* Timer2 Multiplex Select */

SFR( U0UCR, 0xC4 )/* USART 0 UART Control */

SFR( U0GCR, 0xC5 )/* USART 0 Generic Control */

SFR( CLKCONCMD ,0xC6 ) /*Clock Control Command */

SFR( MEMCTR, 0xC7 )/* Memory System Control */

SFR( _SFRC8, 0xC8 )/* not used */

SFR( WDCTL, 0xC9 )/* Watchdog Timer Control */

SFR( T3CNT, 0xCA )/* Timer 3 Counter */

SFR( T3CTL, 0xCB )/* Timer 3 Control */

SFR( T3CCTL0, 0xCC ) /*Timer 3 Channel 0 Capture/Compare Control */

SFR( T3CC0, 0xCD )/* Timer 3 Channel 0Capture/Compare Value */

SFR( T3CCTL1, 0xCE )/* Timer 3 Channel 1Capture/Compare Control */

SFR( T3CC1, 0xCF )/* Timer 3 Channel 1Capture/Compare Value */

/*Program Status Word*/

SFRBIT( PSW, 0xD0, CY, AC, F0, RS1, RS0, OV,F1, P )

SFR( DMAIRQ, 0xD1 )/* DMA Interrupt Flag */

SFR( DMA1CFGL, 0xD2 )/* DMA Channel 1-4 ConfigurationAddress Low Byte */

SFR( DMA1CFGH, 0xD3 )/* DMA Channel 1-4 ConfigurationAddress High Byte */

SFR( DMA0CFGL, 0xD4 )/* DMA Channel 0 ConfigurationAddress Low Byte */

SFR( DMA0CFGH, 0xD5 )/* DMA Channel 0 ConfigurationAddress High Byte */

SFR( DMAARM, 0xD6 )/* DMA Channel Arm */

SFR( DMAREQ, 0xD7 )/* DMA Channel Start Request andStatus */

/* Timers 1/3/4 Interrupt Mask/Flag*/

SFRBIT( TIMIF, 0xD8 , _TIMIF7, T1OVFIM,T4CH1IF, T4CH0IF, T4OVFIF, T3CH1IF, T3CH0IF, T3OVFIF )

SFR( _SFRD9,0xD9 ) /*reserved*/

SFR( T1CC0L, 0xDA )/* Timer 1 Channel 0Capture/Compare Value Low Byte */

SFR( T1CC0H, 0xDB )/* Timer 1 Channel 0Capture/Compare Value High Byte */

SFR( T1CC1L, 0xDC )/* Timer 1 Channel 1Capture/Compare Value Low Byte */

SFR( T1CC1H, 0xDD )/* Timer 1 Channel 1Capture/Compare Value High Byte */

SFR( T1CC2L, 0xDE )/* Timer 1 Channel 2Capture/Compare Value Low Byte */

SFR( T1CC2H, 0xDF )/* Timer 1 Channel 2Capture/Compare Value High Byte */

SFR( ACC, 0xE0 )/* Accumulator */

SFR( _SFRE1, 0xE1 )/* reserved */

SFR( T1CNTL, 0xE2 )/* Timer 1 Counter Low */

SFR( T1CNTH, 0xE3 )/* Timer 1 Counter High */

SFR( T1CTL, 0xE4 )/* Timer 1 Control AndStatus */

SFR( T1CCTL0, 0xE5 )/* Timer 1 Channel 0Capture/Compare Control */

SFR( T1CCTL1, 0xE6 )/* Timer 1 Channel 1Capture/Compare Control */

SFR( T1CCTL2, 0xE7 )/* Timer 1 Channel 2Capture/Compare Control */

/* Interrupt Flags 5*/

SFRBIT(IRCON2 , 0xE8, _IRCON27,_IRCON26, _IRCON25, WDTIF, P1IF, UTX1IF, UTX0IF, P2IF )

SFR( _SFRE9, 0xE9 )/* reserved */

SFR( T4CNT, 0xEA )/* Timer 4 Counter */

SFR( T4CTL, 0xEB )/* Timer 4 Control */

SFR( T4CCTL0, 0xEC )/* Timer 4 Channel 0 Capture/CompareControl */

SFR( T4CC0, 0xED )/* Timer 4 Channel 0Capture/Compare Value */

SFR( T4CCTL1, 0xEE )/* Timer 4 Channel 1Capture/Compare Control */

SFR( T4CC1, 0xEF )/* Timer 4 Channel 1 Capture/CompareValue */

SFR( B, 0xF0 )/* B Register */

SFR( PERCFG, 0xF1 )/* Peripheral I/O Control */

SFR( ADCCFG, 0xF2 )/* ADC Input Configuration(legacy name) */

SFR( APCFG, 0xF2 )/* Analog Periferal I/OConfiguration */

SFR( P0SEL, 0xF3 )/* Port 0 Function Select */

/*此处可以看到在寄存器名对应的sfr地址*/

SFR( P1SEL, 0xF4 )/* Port 1 Function Select */

SFR( P2SEL, 0xF5 )/* Port 2 Function Select */

SFR( P1INP, 0xF6 )/* Port 1 Input Mode */

SFR( P2INP,0xF7 ) /*Port 2 Input Mode */

/* USART 1 Control and Status*/

SFRBIT( U1CSR, 0xF8, U1MODE, U1RE, U1SLAVE,U1FE, U1ERR, U1RX_BYTE, U1TX_BYTE, U1ACTIVE )

SFR( U1DBUF, 0xF9 )/* USART 1 Receive/Transmit DataBuffer */

SFR( U1BAUD, 0xFA )/* USART 1 Baud Rate Control */

SFR( U1UCR, 0xFB )/* USART 1 UART Control */

SFR( U1GCR, 0xFC )/* USART 1 Generic Control */

SFR( P0DIR, 0xFD )/* Port 0 Direction */

SFR( P1DIR, 0xFE )/* Port 1 Direction */

SFR( P2DIR, 0xFF )/* Port 2 Direction */

/*------------------------------------------------------------------------------------------------

* XdataRadio Registers

*------------------------------------------------------------------------------------------------

*/

/* Radio ControlRegisters */

#define RFSTAT XREG( 0x618D )

#define ATEST XREG( 0x61A9 )

/*------------------------------------------------------------------------------------------------

* XdataUSB Registers

*------------------------------------------------------------------------------------------------

*/

#define USBADDRXREG( 0x6200 ) /* Function Address */

#define USBPOWXREG( 0x6201 ) /* Power/Control Register */

#define USBIIFXREG( 0x6202 ) /* IN Endpoints and EP0 Interrupt Flags */

#define _XREG6203XREG( 0x6203 ) /* Reserved */

#define USBOIFXREG( 0x6204 ) /* OUT Endpoints Interrupt Flags */

#define _XREG6205XREG( 0x6205 ) /* Reserved */

#define USBCIFXREG( 0x6206 ) /* Common USB Interrupt Flags */

#define USBIIEXREG( 0x6207 ) /* IN Endpoints and EP0 Interrupt Enable Mask */

#define _XREG6208XREG( 0x6208 ) /* Reserved */

#define USBOIEXREG( 0x6209 ) /* OUT Endpoints Interrupt Enable Mask */

#define _XREG620AXREG( 0x620A ) /* Reserved */

#define USBCIEXREG( 0x620B ) /* Common USB Interrupt Enable Mask */

#define USBFRMLXREG( 0x620C ) /* Current Frame Number (Low byte) */

#define USBFRMHXREG( 0x620D ) /* Current Frame Number (High byte) */

#define USBINDEXXREG( 0x620E ) /* Selects current endpoint */

#define USBCTRLXREG( 0x620F ) /* USB Control Register */

#define USBMAXIXREG( 0x6210 ) /* Max. packet size for IN endpoint */

#define USBCS0XREG( 0x6211 ) /* EP0 Control and Status (USBINDEX = 0) */

#define USBCSILXREG( 0x6211 ) /* IN EP{1-5} Control and Status Low (USBINDEX > 0) */

#define USBCSIHXREG( 0x6212 ) /* IN EP{1-5} Control and Status High */

#define USBMAXOXREG( 0x6213 ) /* Max. packet size for OUT endpoint */

#define USBCSOLXREG( 0x6214 ) /* OUT EP{1-5} Control and Status Low */

#define USBCSOHXREG( 0x6215 ) /* OUT EP{1-5} Control and Status High */

#define USBCNT0XREG( 0x6216 ) /* Number of received bytes in EP0 FIFO(USBINDEX = 0) */

#define USBCNTLXREG( 0x6216 ) /* Number of bytes in OUT FIFO Low (USBINDEX > 0) */

#define USBCNTHXREG( 0x6217 ) /* Number of bytes in OUT FIFO High */

#define USBF0XREG( 0x6220 ) /* Endpoint 0 FIFO */

#define USBF1XREG( 0x6222 ) /* Endpoint 1 FIFO */

#define USBF2XREG( 0x6224 ) /* Endpoint 2 FIFO */

#define USBF3XREG( 0x6226 ) /* Endpoint 3 FIFO */

#define USBF4XREG( 0x6228 ) /* Endpoint 4 FIFO */

#define USBF5XREG( 0x622A ) /* Endpoint 5 FIFO */

/*------------------------------------------------------------------------------------------------

* XdataRegisters

*------------------------------------------------------------------------------------------------

*/

/* ObservabilityControl */

#defineRFC_OBS_CTRL0 XREG( 0x61AE )

#defineRFC_OBS_CTRL1 XREG( 0x61AF )

#defineRFC_OBS_CTRL2 XREG( 0x61B0 )

#defineOBSSEL0 XREG( 0x6243 )

#defineOBSSEL1 XREG( 0x6244 )

#defineOBSSEL2 XREG( 0x6245 )

#defineOBSSEL3 XREG( 0x6246 )

#defineOBSSEL4 XREG( 0x6247 )

#defineOBSSEL5 XREG( 0x6248 )

#define TR0 XREG( 0x624B )

/* ChipIdentification */

#define CHVER XREG( 0x6249 )

#define CHIPID XREG( 0x624A )

/* Debug InterfaceDMA Write to Flash */

#defineDBGDATA XREG( 0x6260 )

/* Flash Controller*/

#define FCTL XREG( 0x6270 )

#define FADDRL XREG( 0x6271 )

#define FADDRH XREG( 0x6272 )

#define FWDATA XREG( 0x6273 )

#define_XREG6274 XREG( 0x6274 )

#define_XREG6275 XREG( 0x6275 )

/* Chip Information*/

#defineCHIPINFO0 XREG( 0x6276 )

#defineCHIPINFO1 XREG( 0x6277 )

/* IR GenerationControl */

#define IRCTL XREG( 0x6281 )

/* Clock Loss Detector*/

#define CLD XREG( 0x6290 )

/* Timer 1 Channels(only mapped as XREG) */

#defineT1CCTL3 XREG( 0x62A3 )

#defineT1CCTL4 XREG( 0x62A4 )

#define T1CC3L XREG( 0x62AC )

#define T1CC3H XREG( 0x62AD )

#define T1CC4L XREG( 0x62AE )

#define T1CC4H XREG( 0x62AF )

/* Definition whichincludes channels represented in SFR (additional XREG mapping of SFR) */

#defineXX_T1CCTL0 XREG( 0x62A0 )

#defineXX_T1CCTL1 XREG( 0x62A1 )

#define XX_T1CCTL2 XREG( 0x62A2 )

#defineXX_T1CCTL3 XREG( 0x62A3 )

#defineXX_T1CCTL4 XREG( 0x62A4 )

#defineXX_T1CC0L XREG( 0x62A6 )

#defineXX_T1CC0H XREG( 0x62A7 )

#defineXX_T1CC1L XREG( 0x62A8 )

#defineXX_T1CC1H XREG( 0x62A9 )

#defineXX_T1CC2L XREG( 0x62AA )

#defineXX_T1CC2H XREG( 0x62AB )

#defineXX_T1CC3L XREG( 0x62AC )

#defineXX_T1CC3H XREG( 0x62AD )

#defineXX_T1CC4L XREG( 0x62AE )

#defineXX_T1CC4H XREG( 0x62AF )

/* Pointers forarray access */

#defineP_T1CCTL PXREG( 0x62A0 )

#define P_T1CC PXREG( 0x62A6 )

/* Sleep TimerCapture Control */

#define STCC XREG( 0x62B0 )

#define STCS XREG( 0x62B1 )

#define STCV0 XREG( 0x62B2 )

#define STCV1 XREG( 0x62B3 )

#define STCV2 XREG( 0x62B4 )

/* Op.Amp. Control*/

#defineOPAMPMC XREG( 0x61AD )

#define OPAMPC XREG( 0x62C0 )

#define OPAMPS XREG( 0x62C1 )

/* AnalogComparator Control */

#define CMPCTL XREG( 0x62D0 )

/*------------------------------------------------------------------------------------------------

* XdataMapped SFRs

*------------------------------------------------------------------------------------------------

*/

/*

* MostSFRs are also accessible through XDATA address space. The register definitions for

* thistype of access are listed below. Theregister names are identical to the SFR names

* butwith the prefix X_ to denote an XDATA register.

*

* SomeSFRs are not accessible through XDATA space.For clarity, entries are included for these

*registers. They have a prefix of_NA to denote "not available."

*

* Forregister descriptions, refer to the actual SFR declartions elsewhere in thisfile.

*/

#define X_P0 XREG( 0x7080 ) /*Port 0. NOTE! Read-only access from XREG. */

#define _NA_SP XREG( 0x7081 )

#define_NA_DPL0 XREG( 0x7082 )

#define_NA_DPH0 XREG( 0x7083 )

#define _NA_DPL1 XREG( 0x7084 )

#define_NA_DPH1 XREG( 0x7085 )

#defineX_U0CSR XREG( 0x7086 ) /*USART 0 Control and Status */

#define_NA_PCON XREG( 0x7087 )

#define_NA_TCON XREG( 0x7088 )

#defineX_P0IFG XREG( 0x7089 ) /*Port 0 Interrupt Status Flag */

#defineX_P1IFG XREG( 0x708A ) /*Port 1 Interrupt Status Flag */

#defineX_P2IFG XREG( 0x708B ) /*Port 2 Interrupt Status Flag */

#defineX_PICTL XREG( 0x708C ) /*Port Interrupt Control */

#defineX_P1IEN XREG( 0x708D ) /*Port 1 Interrupt Mask */

#define_NA_SFR8E XREG( 0x708E )

#defineX_P0INP XREG( 0x708F ) /*Port 0 Input Mode */

#define X_P1 XREG( 0x7090 ) /*Port 1. NOTE! Read-only access from XREG. */

#define_NA_SFR91 XREG( 0x7091 )

#define_NA_DPS XREG( 0x7092 )

#defineX_MPAGE XREG( 0x7093 ) /*Memory Page Select */

#defineX_T2CTRL XREG( 0x7094 ) /*Timer2 Control Register */

#define X_ST0 XREG( 0x7095 ) /*Sleep Timer 0 */

#define X_ST1 XREG( 0x7096 ) /*Sleep Timer 1 */

#define X_ST2 XREG( 0x7097 ) /*Sleep Timer 2 */

#define_NA_S0CON XREG( 0x7098 )

#define_NA_SFR99 XREG( 0x7099 )

#define_NA_IEN2 XREG( 0x709A )

#define_NA_S1CON XREG( 0x709B )

#defineX_T2CSPCFG XREG( 0x709C ) /*Timer2 CSP Interface Configuration (legacy name) */

#defineX_T2EVTCFG XREG( 0x709C ) /*Timer2 Event Output Configuration */

#defineX_SLEEPSTA XREG( 0x709D ) /*Sleep Status */

#define X_CLKCONSTAXREG( 0x709E ) /* Clock Control Status */

#define X_FMAP XREG( 0x709F ) /*Flash Bank Map */

#define X_P2 XREG( 0x70A0 ) /*Port 2. NOTE! Read-only access from XREG. */

#defineX_T2IRQF XREG( 0x70A1 ) /*Timer2 Interrupt Flags */

#define X_T2M0 XREG( 0x70A2 ) /*Timer2 Multiplexed Register 0 */

#define X_T2M1 XREG( 0x70A3 ) /*Timer2 Multiplexed Register 1 */

#defineX_T2MOVF0 XREG( 0x70A4 ) /*Timer2 Multiplexed Overflow Register 0 */

#defineX_T2MOVF1 XREG( 0x70A5 ) /*Timer2 Multiplexed Overflow Register 1 */

#defineX_T2MOVF2 XREG( 0x70A6 ) /*Timer2 Multiplexed Overflow Register 2 */

#defineX_T2IRQM XREG( 0x70A7 ) /*Timer2 Interrupt Mask */

#define_NA_IEN0 XREG( 0x70A8 )

#define_NA_IP0 XREG( 0x70A9 )

#define_NA_SFRAA XREG( 0x70AA )

#defineX_P0IEN XREG( 0x70AB ) /**/

#defineX_P2IEN XREG( 0x70AC ) /**/

#defineX_STLOAD XREG( 0x70AD ) /*Sleep Timer Load Status */

#define X_PMUX XREG( 0x70AE ) /**/

#defineX_T1STAT XREG( 0x70AF ) /**/

#define_NA_SFRB0 XREG( 0x70A8 )

#defineX_ENCDI XREG( 0x70B1 ) /*Encryption Input Data */

#defineX_ENCDO XREG( 0x70B2 ) /*Encryption Output Data */

#defineX_ENCCS XREG( 0x70B3 ) /*Encryption Control and Status */

#defineX_ADCCON1 XREG( 0x70B4 ) /*ADC Control 1 */

#defineX_ADCCON2 XREG( 0x70B5 ) /*ADC Control 2 */

#defineX_ADCCON3 XREG( 0x70B6 ) /*ADC Control 3 */

#define_NA_SFRB7 XREG( 0x70B7 )

#define_NA_IEN1 XREG( 0x70B8 )

#define_NA_IP1 XREG( 0x70B9 )

#define X_ADCL XREG( 0x70BA ) /*ADC Data Low */

#define X_ADCH XREG( 0x70BB ) /*ADC Data High */

#define X_RNDL XREG( 0x70BC ) /*Random Register Low Byte */

#define X_RNDH XREG( 0x70BD ) /*Random Register High Byte */

#defineX_SLEEPCMD XREG( 0x70BE ) /*Sleep Mode Command */

#define_NA_SFRBF XREG( 0x70BF )

#define_NA_IRCON XREG( 0x70C0 )

#defineX_U0DBUF XREG( 0x70C1 ) /*USART 0 Receive/Transmit Data Buffer */

#defineX_U0BAUD XREG( 0x70C2 ) /*USART 0 Baud Rate Control*/

#defineX_T2MSEL XREG( 0x70C3 ) /*Timer2 Multiplex Select */

#defineX_U0UCR XREG( 0x70C4 ) /*USART 0 UART Control */

#defineX_U0GCR XREG( 0x70C5 ) /*USART 0 Generic Control */

#define X_CLKCONCMDXREG( 0x70C6 ) /* Clock Control Command */

#defineX_MEMCTR XREG( 0x70C7 ) /*Memory Arbiter Control */

#define_NA_SFRC8 XREG( 0x70C8 )

#defineX_WDCTL XREG( 0x70C9 ) /*Watchdog Timer Control */

#defineX_T3CNT XREG( 0x70CA ) /*Timer 3 Counter */

#defineX_T3CTL XREG( 0x70CB ) /*Timer 3 Control */

#defineX_T3CCTL0 XREG( 0x70CC ) /*Timer 3 Channel 0 Capture/Compare Control */

#defineX_T3CC0 XREG( 0x70CD ) /*Timer 3 Channel 0 Capture/Compare Value */

#defineX_T3CCTL1 XREG( 0x70CE ) /*Timer 3 Channel 1 Capture/Compare Control */

#defineX_T3CC1 XREG( 0x70CF ) /*Timer 3 Channel 1 Capture/Compare Value */

#define_NA_PSW XREG( 0x70D0 )

#defineX_DMAIRQ XREG( 0x70D1 ) /*DMA Interrupt Flag */

#defineX_DMA1CFGL XREG( 0x70D2 ) /*DMA Channel 1-4 Configuration Address Low Byte */

#defineX_DMA1CFGH XREG( 0x70D3 ) /*DMA Channel 1-4 Configuration Address High Byte */

#defineX_DMA0CFGL XREG( 0x70D4 ) /*DMA Channel 0 Configuration Address Low Byte */

#defineX_DMA0CFGH XREG( 0x70D5 ) /*DMA Channel 0 Configuration Address High Byte */

#defineX_DMAARM XREG( 0x70D6 ) /*DMA Channel Arm */

#defineX_DMAREQ XREG( 0x70D7 ) /*DMA Channel Start Request and Status */

#defineX_TIMIF XREG( 0x70D8 ) /*Timers 1/3/4 Interrupt Mask/Flag */

#define_NA_SFRD9 XREG( 0x70D9 )

#defineX_T1CC0L XREG( 0x70DA ) /*Timer 1 Channel 0 Capture/Compare Value Low Byte */

#defineX_T1CC0H XREG( 0x70DB ) /*Timer 1 Channel 0 Capture/Compare Value High Byte */

#defineX_T1CC1L XREG( 0x70DC ) /*Timer 1 Channel 1 Capture/Compare Value Low Byte */

#defineX_T1CC1H XREG( 0x70DD ) /*Timer 1 Channel 1 Capture/Compare Value High Byte */

#defineX_T1CC2L XREG( 0x70DE ) /*Timer 1 Channel 2 Capture/Compare Value Low Byte */

#defineX_T1CC2H XREG( 0x70DF ) /*Timer 1 Channel 2 Capture/Compare Value High Byte */

#define_NA_ACC XREG( 0x70E0 )

#define_NA_SFRE1 XREG( 0x70E1 )

#defineX_T1CNTL XREG( 0x70E2 ) /*Timer 1 Counter Low */

#defineX_T1CNTH XREG( 0x70E3 ) /*Timer 1 Counter High */

#defineX_T1CTL XREG( 0x70E4 ) /*Timer 1 Control and Status */

#defineX_T1CCTL0 XREG( 0x70E5 ) /*Timer 1 Channel 0 Capture/Compare Control */

#defineX_T1CCTL1 XREG( 0x70E6 ) /*Timer 1 Channel 1 Capture/Compare Control */

#defineX_T1CCTL2 XREG( 0x70E7 ) /*Timer 1 Channel 2 Capture/Compare Control */

#define_NA_IRCON2 XREG( 0x70E8 )

#define_NA_SFRE9 XREG( 0x70E9 )

#defineX_T4CNT XREG( 0x70EA ) /*Timer 4 Counter */

#defineX_T4CTL XREG( 0x70EB ) /*Timer 4 Control */

#defineX_T4CCTL0 XREG( 0x70EC ) /*Timer 4 Channel 0 Capture/Compare Control */

#defineX_T4CC0 XREG( 0x70ED ) /*Timer 4 Channel 0 Capture/Compare Value */

#defineX_T4CCTL1 XREG( 0x70EE ) /*Timer 4 Channel 1 Capture/Compare Control */

#defineX_T4CC1 XREG( 0x70EF ) /*Timer 4 Channel 1 Capture/Compare Value */

#define _NA_B XREG( 0x70F0 )

#defineX_PERCFG XREG( 0x70F1 ) /*Peripheral Control */

#defineX_ADCCFG XREG( 0x70F2 ) /*ADC Input Configuration (legacy name) */

#defineX_APCFG XREG( 0x70F2 ) /*Analog Periferal I/O Configuration */

#defineX_P0SEL XREG( 0x70F3 ) /*Port 0 Function Select */

#defineX_P1SEL XREG( 0x70F4 ) /*Port 1 Function Select */

#defineX_P2SEL XREG( 0x70F5 ) /*Port 2 Function Select */

#defineX_P1INP XREG( 0x70F6 ) /*Port 1 Input Mode */

#defineX_P2INP XREG( 0x70F7 ) /*Port 2 Input Mode */

#defineX_U1CSR XREG( 0x70F8 ) /*USART 1 Control and Status */

#defineX_U1DBUF XREG( 0x70F9 ) /*USART 1 Receive/Transmit Data Buffer */

#defineX_U1BAUD XREG( 0x70FA ) /*USART 1 Baud Rate Control */

#defineX_U1UCR XREG( 0x70FB ) /*USART 1 UART Control */

#defineX_U1GCR XREG( 0x70FC ) /*USART 1 Generic Control */

#defineX_P0DIR XREG( 0x70FD ) /*Port 0 Direction */

#defineX_P1DIR XREG( 0x70FE ) /*Port 1 Direction */

#defineX_P2DIR XREG( 0x70FF ) /* Port2 Direction*/

/*------------------------------------------------------------------------------------------------

* Flash

*------------------------------------------------------------------------------------------------

*/

#defineP_INFOPAGE PXREG( 0x7800 ) /* Pointer to Start of Flash InformationPage */

#defineP_XBANK PXREG( 0x8000 ) /* Pointer to Start of Selectable Flash Bank(XBANK) */

/* ------------------------------------------------------------------------------------------------

*/

#ifdef__IAR_SYSTEMS_ICC__

#pragmalanguage=restore

#endif

/**************************************************************************************************

*/

#endif

参考:

http://bbs.elecfans.com/jishu_431223_1_1.html