tps65910

6.6 Backup Battery Management
The device includes a back-up battery switch connecting the VRTC regulator input to a main battery
(VCC7) or to a back-up battery (VBACKUP), depending on the batteries voltage value.
The VRTC supply can then be maintained during a BACKUP state as far as the input voltage is high
enough (>VBNPR threshold). Below the VBNPR voltage threshold the digital core of the device is set
under reset by internal signal POR (Power-on Reset).
The back-up domain functions which are always supplied from VRTC comprehend:
• The internal 32-kHz oscillator
• Backup registers
The back-up battery can be charged from the main battery through an embedded charger. The back-up
battery charge voltage and enable is controlled through BBCH_REG register programming. This register
content is maintained during the device Backup state.
Hence enabled the back-up battery charge is maintained as far as the main battery voltage is higher than
the VMBLO threshold and the back-up battery voltage.
  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值