SetCommMask 事件设置

 

Value	Meaning
EV_BREAK	A break was detected on input.
EV_CTS	The CTS (clear-to-send) signal changed state.
EV_DSR	The DSR (data-set-ready) signal changed state.
EV_ERR	A line-status error occurred. Line-status errors are CE_FRAME, CE_OVERRUN, and CE_RXPARITY.
EV_RING	A ring indicator was detected.
EV_RLSD	The RLSD (receive-line-signal-detect) signal changed state.
EV_RXCHAR	A character was received and placed in the input buffer.
EV_RXFLAG	The event character was received and placed in the input buffer. The event character is specified in the device's DCB structure, which is applied to a serial port by using the SetCommState function.
EV_TXEMPTY	The last character in the output buffer was sent.

          EV_RXCHAR 收到数据
          EV_TXEMPTY 数据已经发送完毕
          EV_CTS 清除发送信号有变化 (CTS引脚电平有变化)
          EV_DSR 数据设备就绪状态有变化 (DSR引脚电平有变化)
          EV_RLSD 数据载波检测状态有变化 (DCD引脚电平有变化)
          EV_RING 有振铃信号
          EV_RXFLAG 收到可产生事件的字符, 可参考 API 函数 SetCommState
          EV_RX80FULL 接收缓存已经达到 80% 的容量, 如果是通过 Modem 等设备进行通讯, 要及时通知对方暂停发送
          EV_ERR 线路状态有错误, 包括 CE_FRAME, CE_OVERRUN 和 CE_RXPARITY.