Qcom LK阶段如何使用I2C介绍

下面是Qcom LK阶段使用I2C的代码：

#include <i2c_qup.h>
#include <blsp_qup.h>

static struct qup_i2c_dev  *i2c_dev;

i2c_dev = qup_blsp_i2c_init(BLSP_ID_1, QUP_ID_1, 100000, 19200000);

static int qrd_lcd_i2c_read(uint8_t addr)
{
	int ret = 0;
	/* Create a i2c_msg buffer, that is used to put the controller into read
	   mode and then to read some data. */
	struct i2c_msg msg_buf[] = {
		{QRD_LCD_I2C_ADDRESS, I2C_M_WR, 1, &addr},
		{QRD_LCD_I2C_ADDRESS, I2C_M_RD, 1, &ret}
	};

	ret = qup_i2c_xfer(i2c_dev, msg_buf, 2);
	if(ret < 0) {
		dprintf(CRITICAL, "qup_i2c_xfer error %d\n", ret);
		return ret;
	}
	return 0;
}
static int qrd_lcd_i2c_write(uint8_t addr, uint8_t val)
{
	int ret = 0;
	uint8_t data_buf[] = { addr, val };

	/* Create a i2c_msg buffer, that is used to put the controller into write
	   mode and then to write some data. */
	struct i2c_msg msg_buf[] = { {QRD_LCD_I2C_ADDRESS,
				      I2C_M_WR, 2, data_buf}
	};
	ret = qup_i2c_xfer(i2c_dev, msg_buf, 1);
	if(ret < 0) {
		dprintf(CRITICAL, "qup_i2c_xfer error %d\n", ret);
		return ret;
	}
	return 0;
}