linux静态ip设置

1、首先查看网卡信息，主要是物理地址

cat /etc/udev/rules.d/70-persistent-net.rules

# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:db:2e:10", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

注意：ATTR{address}=="00:0c:29:db:2e:10"， 物理地址为：00:0c:29:db:2e:10

2、填写静态ip

DEVICE=eth0
BOOTPROTO=static
HWADDR=00:0c:29:db:2e:10
ONBOOT=yes
TYPE=Ethernet
USERCTL=no
IPV6INIT=no
PEERDNS=yes
DHCP_HOSTNAME=192.168.16.77
IPADDR=192.168.16.131
NETMASK=255.255.255.0
GATEWAY=192.168.16.1

DNS1=192.168.16.1
DNS2=114.114.114.114

注意要修改的地方

IPADDR：ip地址

NETMASK：子网掩码

GATEWAY：网关

HWADDR：一定要填写和第一步查看的额为例地址一致

DHCP_HOSTNAME：没有可以不用填写

DNS：填写你相对应的。

3，重启网络服务

service network restart