概览
flume-ng中最重要的核心三大组件就是source,channel,sink
source负责从源端收集数据，产出event
channel负责暂存event，以备下游取走消费
sink负责消费通道中的event，写到最终的输出端上
以上是总体的一个简单结构图，下面我们来深入每一个组件的内部看看：
1、Source
source接口的定义如下：
@InterfaceAudience.Public
@InterfaceStability.Stable
public interface Source extends LifecycleAware, NamedComponent {
/**
* Specifies which channel processor will handle this source's events.
*
* @param channelProcessor
*/
public void setChannelProcessor(ChannelProcessor channelProcessor);
/**
* Returns the channel processor that will handle this source's events.
*/
public ChannelProcessor getChannelProcessor();
}
source生成event并且调用配置的channelprocessor的相关方法，持续的将events存入配置的channel里
channelProcessor中有通道选择器和拦截器链，该过程处在source端收到数据和放入通道直接
该source继承了两个类
1、NamedComponent
负责给每一个组件取一个唯一标识，就是名字，这个名字来源于我们的配置
2、LifecycleAware
负责组件的启停和状态维护
Source接口的直接实现类是AbstractSource抽象类
该类中就定义了通道处理器
还有一个生命状态周期的枚举类型
public enum LifecycleState {
IDLE, START, STOP, ERROR;
public static final LifecycleState[] START_OR_ERROR = new LifecycleState[] {
START, ERROR };
public static final LifecycleState[] STOP_OR_ERROR = new LifecycleState[] {
STOP, ERROR };
}
这里就定义了一个组件会有的4种状态
实现接口的启停组件方法，方法体中只有一个状态的赋值，具体实现，我们来看一个具体的Source——ExecSource
读取配置方面很简单，这里就不说了，看下start方法
public void start() {
logger.info("Exec source starting with command:{}", command);
executor = Executors.newSingleThreadExecutor();
runner = new ExecRunnable(shell, command, getChannelProcessor(), sourceCounter,
restart, restartThrottle, logStderr, bufferCount, batchTimeout, charset);
// FIXME: Use a callback-like executor / future to signal us upon failure.
runnerFuture = executor.submit(runner);
/*
* NB: This comes at the end rather than the beginning of the method because
* it sets our state to running. We want to make sure the executor is alive
* and well first.
*/
sourceCounter.start();
super.start();
logger.debug("Exec source started");
}
该方法内部就是启动了一个线程去执行我们配置的终端命令
2、channel
对于通道来说，最重要的就是event的维护，flume的核心就是要中转这些event，所以event一定不能出事
Channel接口定义如下：
@InterfaceAudience.Public
@InterfaceStability.Stable
public interface Channel extends LifecycleAware, NamedComponent {
/**
* <p>Puts the given event into the channel.</p>
* <p><strong>Note</strong>: This method must be invoked within an active
* {@link Transaction} boundary. Failure to do so can lead to unpredictable
* results.</p>
* @param event the event to transport.
* @throws ChannelException in case this operation fails.
* @see org.apache.flume.Transaction#begin()
*/
public void put(Event event) throws ChannelException;
/**
* <p>Returns the next event from the channel if available. If the channel
* does not have any events available, this method must return {@code null}.
* </p>
* <p><strong>Note</strong>: This method must be invoked within an active
* {@link Transaction} boundary. Failure to do so can lead to unpredictable
* results.</p>
* @return the next available event or {@code null} if no events are
* available.
* @throws ChannelException in case this operation fails.
* @see org.apache.flume.Transaction#begin()
*/
public Event take() throws ChannelException;
/**
* @return the transaction instance associated with this channel.
*/
public Transaction getTransaction();
}
|
通道中的event全部都在事务的管理之中
先来看看这个事务的定义
<pre code_snippet_id="593798" snippet_file_name="blog_20150130_5_6226220" name="code" class="java">public interface Transaction {
public enum TransactionState {Started, Committed, RolledBack, Closed };
/**
* <p>Starts a transaction boundary for the current channel operation. If a
* transaction is already in progress, this method will join that transaction
* using reference counting.</p>
* <p><strong>Note</strong>: For every invocation of this method there must
* be a corresponding invocation of {@linkplain #close()} method. Failure
* to ensure this can lead to dangling transactions and unpredictable results.
* </p>
*/
public void begin();
/**
* Indicates that the transaction can be successfully committed. It is
* required that a transaction be in progress when this method is invoked.
*/
public void commit();
/**
* Indicates that the transaction can must be aborted. It is
* required that a transaction be in progress when this method is invoked.
*/
public void rollback();
/**
* <p>Ends a transaction boundary for the current channel operation. If a
* transaction is already in progress, this method will join that transaction
* using reference counting. The transaction is completed only if there
* are no more references left for this transaction.</p>
* <p><strong>Note</strong>: For every invocation of this method there must
* be a corresponding invocation of {@linkplain #begin()} method. Failure
* to ensure this can lead to dangling transactions and unpredictable results.
* </p>
*/
public void close();
}
|
和我们想想中的一样，也就是一些标准的事务方法的定义，和一个事务状态的枚举类型的定义
基本事务语义抽象类是对它的实现BasicTransactionSemantics
该类定义了两个属性
state状态和initialThreadId，id是唯一的，用来标识事务
构造方法中会赋值为NEW状态，并获取当前事务的一个ID值
重点来看下如下几个方法的具体实现：
protected void doBegin() throws InterruptedException {}
protected abstract void doPut(Event event) throws InterruptedException;
protected abstract Event doTake() throws InterruptedException;
protected abstract void doCommit() throws InterruptedException;
protected abstract void doRollback() throws InterruptedException;
protected void doClose() {}
|
1、doBegin
没什么好说的，就是检查状态是否NEW，ID是否匹配，没有问题后，将状态修改为OPEN，表示事务打开
2、doPut
takeList和putList维护的是希望取出成功和放入成功的event队列
检查ID是否匹配，状态是否打开，event是否为空，为空当然这个put就没意义了
关键看具体是怎么put的？
在FileChannel中有个内部静态类
static class FileBackedTransaction extends BasicTransactionSemantics
private final LinkedBlockingDeque<FlumeEventPointer> takeList;
private final LinkedBlockingDeque<FlumeEventPointer> putList;
|
这分别定义了两个双向队列，用于拿和放
protected void doPut(Event event) throws InterruptedException {
channelCounter.incrementEventPutAttemptCount();
if(putList.remainingCapacity() == 0) {
throw new ChannelException("Put queue for FileBackedTransaction " +
"of capacity " + putList.size() + " full, consider " +
"committing more frequently, increasing capacity or " +
"increasing thread count. " + channelNameDescriptor);
}
// this does not need to be in the critical section as it does not
// modify the structure of the log or queue.
if(!queueRemaining.tryAcquire(keepAlive, TimeUnit.SECONDS)) {
throw new ChannelFullException("The channel has reached it's capacity. "
+ "This might be the result of a sink on the channel having too "
+ "low of batch size, a downstream system running slower than "
+ "normal, or that the channel capacity is just too low. "
+ channelNameDescriptor);
}
boolean success = false;
log.lockShared();
try {
FlumeEventPointer ptr = log.put(transactionID, event);
Preconditions.checkState(putList.offer(ptr), "putList offer failed "
+ channelNameDescriptor);
queue.addWithoutCommit(ptr, transactionID);
success = true;
} catch (IOException e) {
throw new ChannelException("Put failed due to IO error "
+ channelNameDescriptor, e);
} finally {
log.unlockShared();
if(!success) {
// release slot obtained in the case
// the put fails for any reason
queueRemaining.release();
}
}
}
|
1、检查队列的剩余空间
2、keepAlive秒时间内获取一个共享信号量，说明put的过程是互斥的
如果该时间内没有成功获取该信号量，那么event放入失败
3、FlumeEventPointer是用来做检查点机制的，因为这是文件通道，会用日志记录的
1、将event和事务id绑定到Pointer上
2、将pointer放入队列尾部
3、通道中的事件队列FlumeEventQueue添加一个未提交的事件，绑定了事务ID
4、释放共享信号量
3、doTake
protected Event doTake() throws InterruptedException {
channelCounter.incrementEventTakeAttemptCount();
if(takeList.remainingCapacity() == 0) {
throw new ChannelException("Take list for FileBackedTransaction, capacity " +
takeList.size() + " full, consider committing more frequently, " +
"increasing capacity, or increasing thread count. "
+ channelNameDescriptor);
}
log.lockShared();
/*
* 1. Take an event which is in the queue.
* 2. If getting that event does not throw NoopRecordException,
* then return it.
* 3. Else try to retrieve the next event from the queue
* 4. Repeat 2 and 3 until queue is empty or an event is returned.
*/
try {
while (true) {
FlumeEventPointer ptr = queue.removeHead(transactionID);
if (ptr == null) {
return null;
} else {
try {
// first add to takeList so that if write to disk
// fails rollback actually does it's work
Preconditions.checkState(takeList.offer(ptr),
"takeList offer failed "
+ channelNameDescriptor);
log.take(transactionID, ptr); // write take to disk
Event event = log.get(ptr);
return event;
} catch (IOException e) {
throw new ChannelException("Take failed due to IO error "
+ channelNameDescriptor, e);
} catch (NoopRecordException e) {
LOG.warn("Corrupt record replaced by File Channel Integrity " +
"tool found. Will retrieve next event", e);
takeList.remove(ptr);
} catch (CorruptEventException ex) {
if (fsyncPerTransaction) {
throw new ChannelException(ex);
}
LOG.warn("Corrupt record found. Event will be " +
"skipped, and next event will be read.", ex);
takeList.remove(ptr);
}
}
}
} finally {
log.unlockShared();
}
}
|
1、剩余容量检查
2、检查点机制，日志记录操作，从头部取event
3、从takeList中删除该event
4、doCommit
protected void doCommit() throws InterruptedException {
int puts = putList.size();
int takes = takeList.size();
if(puts > 0) {
Preconditions.checkState(takes == 0, "nonzero puts and takes "
+ channelNameDescriptor);
log.lockShared();
try {
log.commitPut(transactionID);
channelCounter.addToEventPutSuccessCount(puts);
synchronized (queue) {
while(!putList.isEmpty()) {
if(!queue.addTail(putList.removeFirst())) {
StringBuilder msg = new StringBuilder();
msg.append("Queue add failed, this shouldn't be able to ");
msg.append("happen. A portion of the transaction has been ");
msg.append("added to the queue but the remaining portion ");
msg.append("cannot be added. Those messages will be consumed ");
msg.append("despite this transaction failing. Please report.");
msg.append(channelNameDescriptor);
LOG.error(msg.toString());
Preconditions.checkState(false, msg.toString());
}
}
queue.completeTransaction(transactionID);
}
} catch (IOException e) {
throw new ChannelException("Commit failed due to IO error "
+ channelNameDescriptor, e);
} finally {
log.unlockShared();
}
} else if (takes > 0) {
log.lockShared();
try {
log.commitTake(transactionID);
queue.completeTransaction(transactionID);
channelCounter.addToEventTakeSuccessCount(takes);
} catch (IOException e) {
throw new ChannelException("Commit failed due to IO error "
+ channelNameDescriptor, e);
} finally {
log.unlockShared();
}
queueRemaining.release(takes);
}
putList.clear();
takeList.clear();
channelCounter.setChannelSize(queue.getSize());
}
|
1、如果putList不为空，提交的是放入通道的事件数量
2、如果takeList不为空，提交的是从通道拿走的事件数量
5、doRollback
protected void doRollback() throws InterruptedException {
int puts = putList.size();
int takes = takeList.size();
log.lockShared();
try {
if(takes > 0) {
Preconditions.checkState(puts == 0, "nonzero puts and takes "
+ channelNameDescriptor);
synchronized (queue) {
while (!takeList.isEmpty()) {
Preconditions.checkState(queue.addHead(takeList.removeLast()),
"Queue add failed, this shouldn't be able to happen "
+ channelNameDescriptor);
}
}
}
putList.clear();
takeList.clear();
queue.completeTransaction(transactionID);
channelCounter.setChannelSize(queue.getSize());
log.rollback(transactionID);
} catch (IOException e) {
throw new ChannelException("Commit failed due to IO error "
+ channelNameDescriptor, e);
} finally {
log.unlockShared();
// since rollback is being called, puts will never make it on
// to the queue and we need to be sure to release the resources
queueRemaining.release(puts);
}
}
|
在此之前，putList,takeList都没有clear，所以这里可以对着两个双向队列回滚操作
以上是文件通道的实现，如果是内存通道，就没有log的检查点记录了，简单多了，不需要维护状态了。
3、sink
sink的接口定义如下：
@InterfaceAudience.Public
@InterfaceStability.Stable
public interface Sink extends LifecycleAware, NamedComponent {
/**
* <p>Sets the channel the sink will consume from</p>
* @param channel The channel to be polled
*/
public void setChannel(Channel channel);
/**
* @return the channel associated with this sink
*/
public Channel getChannel();
/**
* <p>Requests the sink to attempt to consume data from attached channel</p>
* <p><strong>Note</strong>: This method should be consuming from the channel
* within the bounds of a Transaction. On successful delivery, the transaction
* should be committed, and on failure it should be rolled back.
* @return READY if 1 or more Events were successfully delivered, BACKOFF if
* no data could be retrieved from the channel feeding this sink
* @throws EventDeliveryException In case of any kind of failure to
* deliver data to the next hop destination.
*/
public Status process() throws EventDeliveryException;
public static enum Status {
READY, BACKOFF
}
}
|
sink与一个通道连接，并消费通道中的events，把它们发送到一个配置的目的地
其实和source的原理大部分相同，同样有一个AbstractSink
我们同样看一个具体实现吧，HDFSEventSink
看它的process方法
public Status process() throws EventDeliveryException {
Channel channel = getChannel();
Transaction transaction = channel.getTransaction();
List<BucketWriter> writers = Lists.newArrayList();
transaction.begin();
…………………………
transaction.commit();
if (txnEventCount < 1) {
return Status.BACKOFF;
} else {
sinkCounter.addToEventDrainSuccessCount(txnEventCount);
return Status.READY;
}
} catch (IOException eIO) {
transaction.rollback();
LOG.warn("HDFS IO error", eIO);
return Status.BACKOFF;
} catch (Throwable th) {
transaction.rollback();
LOG.error("process failed", th);
if (th instanceof Error) {
throw (Error) th;
} else {
throw new EventDeliveryException(th);
}
} finally {
transaction.close();
}
}
|
这里可以看到，flume-ng在sink端是有事务控制的
事务从 从通道中取event开始，到sink到下一个目的地结束
在这个过程中，任意的失败都会导致事务的回滚，这就保证数据了一致性。
5625
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
