在Ubuntu 18.04上使用有线-无线绑定（setup bonding with wireless and wired adapters）

1、废话不多说，直接上Sample config: 

# Sample config for /etc/network/interfaces
# ifupdown has been replaced by netplan(5) on this system.  See
# /etc/netplan for current configuration.
# To re-enable ifupdown on this system, you can run:
#    sudo apt install ifupdown

source /etc/network/interfaces.d/*

auto enx0050b64b9e20
iface enx0050b64b9e20 inet manual
    bond-master bond0
    bond-primary enx0050b64b9e20

auto wlan0
iface wlan0 inet manual
    bond-master bond0
    bond-primary enx0050b64b9e20
    bond-give-a-chance 10
    wpa-scan-ssid 1
    wpa-ssid yourwifissid
    #wpa-bssid xx:xx:xx:xx:xx:xx
    wpa-psk yourpassword

auto bond0
#iface bond0 inet dhcp
iface bond0 inet static
    address 192.168.212.3
    netmask 255.255.255.0
    gateway 192.168.212.1
    dns-nameserver 192.168.212.1
    bond-give-a-chance 10
    bond-primary enx0050b64b9e20
    bond-slaves none
    bond-mode active-backup
    bond-miimon 100
    bond-downdelay 200
    bond-updelay 200

iface bond0 inet6 static
    address fd0a:4eb:8be1:10::3/60
    gateway fd0a:4eb:8be1:10::1

2、设置了如上的情况你在连接有线的时候有可能会在有线网卡上获取到新的自动分配的地址，此时需要参照·/etc/netplan·的头部的注释，设置禁止netplan的运行。

 

以上，有线和无线网卡实现热备份（active-backup）