ArcGIS10.0操作之10—矢量化遇到的问题（The feature can not be created. The geometry is valid）

这是自己在矢量化过程中遇到的问题，自己矢量化区时，弹出如下对话框

 

 

 

自己在ESRI英文论坛上找到了答案：原文如下

 

Your screenshot shows that no coordinate system has been set for the data frame in ArcMap, which implies there may not be a defined projection on your dataset.

This is allowable, but generally not good practise.

As John suggested, I would try exporting your LU_Existing_Outcatch featureclass to a new dataset - either shapefile or a new geodatabase featureclass.

Then ensure that this dataset has a defined projection - right-click on it in ArcCatalog and see the Coordinate System options. Let us know if you need a hand with that.

Do the same for all your other layers, including the rasters, to ensure they're all sitting in the correct geographic position.

也就是影像没有空间参考，建议在ArcCatalog定义一个坐标系统，所以在ArcCatalog中定义一个坐标系统就可以了，另外在矢量化前建议为所有图层都定义上影像图对应的坐标系统。