本文介绍了如何在CMDLINE中配置earlyprintk参数，通过搜索kernel源码及配置文件，分析了earlyprintk的调用过程，并解决启动过程中没有相关打印显示的问题。涉及配置文件如kernel-parameters.txt、设备树、BoardConfig.mk等，并探讨了earlycon选项及其在不同config文件中的设置。
解决问题的过程中，好文章推荐，都保存在火狐wilson_sq@qq.com记录中~~~~~~~~
grep -r "earlyprintk" kernel
kernel/Documentation/driver-model/platform.txt:should use early_platform_init("earlyprintk", &platform_driver).
./arch/sh/configs/sh2007_defconfig:CONFIG_CMDLINE="console=ttySC1,115200 ip=dhcp root=/dev/nfs rw nfsroot=/nfs/rootfs,rsize=1024,wsize=1024 earlyprintk=sh-sci.1"
./arch/sh/configs/rsk7203_defconfig:CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
./arch/sh/configs/migor_defconfig:CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
./arch/sh/configs/sdk7786_defconfig:CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200 root=/dev/sda1 nmi_debug=state,debounce rootdelay=5 pmb=iomap ignore_loglevel"
./arch/sh/configs/rsk7201_defconfig:CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
./arch/sh/configs/shx3_defconfig:CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
/************************************
全盘搜索earlyprintk查看其调用过程
***************************************/
全盘搜索earlyprintk查看其调用过程
①在kernel-parameters.txt中有如下描述，看我们的对应哪个,
earlyprintk= [X86,SH,BLACKFIN,ARM] earlyprintk
grep -r "earlyprintk" kernel
kernel/Documentation/driver-model/platform.txt:should use early_platform_init("earlyprintk", &platform_driver).
./arch/sh/configs/sh2007_defconfig:CONFIG_CMDLINE="console=ttySC1,115200 ip=dhcp root=/dev/nfs rw nfsroot=/nfs/rootfs,rsize=1024,wsize=1024 earlyprintk=sh-sci.1"
./arch/sh/configs/rsk7203_defconfig:CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
./arch/sh/configs/migor_defconfig:CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
./arch/sh/configs/sdk7786_defconfig:CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200 root=/dev/sda1 nmi_debug=state,debounce rootdelay=5 pmb=iomap ignore_loglevel"
./arch/sh/configs/rsk7201_defconfig:CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
./arch/sh/configs/shx3_defconfig:CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
/************************************
全盘搜索earlyprintk查看其调用过程
***************************************/
全盘搜索earlyprintk查看其调用过程
①在kernel-parameters.txt中有如下描述，看我们的对应哪个,
earlyprintk= [X86,SH,BLACKFIN,ARM] earlyprintk
最低0.47元/天 解锁文章
1万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
