Smartq7 NFS boot Android.

最新推荐文章于 2021-05-29 03:53:14 发布

stevenliyong

最新推荐文章于 2021-05-29 03:53:14 发布

阅读量952

点赞数

分类专栏：我的SmartQ7 MID 文章标签： network linux command tcp

本文链接：https://blog.csdn.net/stevenliyong/article/details/5046014

版权

我的SmartQ7 MID 专栏收录该内容

15 篇文章 0 订阅

订阅专栏

I first used a JP-108 usb lan adapter (a dm9601 compartiable one), but the device boots very slow through nfs even I enabled the tcp command in the linux kernel commmand line.

Then I tried two USB 2.0 lan adapters, RVL-015 USB 2.0 Lan adapter and Linksys USB200M USB2.0 Network adpater, both using the asix AX88772 chip, and the device can boot through nfs successfully.

The driver for the AX88772 chip is located in the fowllowing linux kernel config:

Device Drivers -> Network device support -> USB Lan Adapters -> ASIX AX88xxx based 2.0 Ethernet Adapters

Besides the usb land adapter, I also got a TEVION 4 ports Usb 2.0 Hub which is supporting the out side power. So that I can use an usb keyboard as well at the same time using the usb lan adapter.