针对多网络环境使用bat快捷配置ip,dns以及网关

新建txt文件，然后把后缀改成 xx.bat ,然后用记事本打开，里面的内容用复制下面的内容，根据实际情况调整不用情况的ip配置，双击运行用，输入1时则根据1对应的配置自动设置ip

@echo off

:start

echo ============请输入数字选择下一步操作:

echo ============1：ip设置为10.25.1.89

echo ============2：ip设置为192.168.35.111

echo ============3：设置为DHCP自动获取ip

set /P var=":"

if %var%==1 goto ip10

if %var%==2 goto ip172

if %var%==3 goto ipdhcp

:ip10

cls

netsh interface ip set address name="本地连接" source=static 

addr=10.25.1.89 mask=255.255.255.0 gateway=10.25.1.254

cmd /c netsh interface ip set dns "本地连接" source=static 

addr=192.168.254.13

echo **IP设置为10.25.1.89，设置成功**

echo ------------------------------------------

goto start

:ip192

cls

netsh interface ip set address name="本地连接" source=static 

addr=192.168.35.111 mask=255.255.255.0 gateway=192.168.35.254

cmd /c netsh interface ip set dns "本地连接" source=static 

addr=192.168.254.8

echo **IP设置为192.168.35.101，设置成功**

echo ------------------------------------------

goto start

:ipdhcp

cls

netsh interface ip set address name="本地连接" source=dhcp

netsh interface ip delete dns "本地连接" all

ipconfig /flushdns

echo **IP设置为DHCP获取，设置成功**

echo ------------------------------------------

goto start