ubuntu 安装python-ldap报错

文章讲述了在安装Python-ldap模块时遇到的基于pyproject.toml的构建错误,问题根源是操作系统缺少必要组件。解决方案是更新操作系统并安装相应依赖,如libsasl2-dev,python3-dev,libldap2-dev,libssl-dev,然后重新执行pipinstallpython-ldap命令,最终成功安装了python-ldap及其依赖。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

报错:

odoo安装 python-ldap 报错pyproject.toml-based,实际上,这个是一个Python3 安装报错。

下面是原始安装报错输出:

Collecting python-ldap
  Using cached python-ldap-3.4.3.tar.gz (377 kB)
  Installing build dependencies ... done
  Getting requirements to build wheel ... done
  Preparing metadata (pyproject.toml) ... done
Collecting pyasn1-modules>=0.1.5
  Using cached pyasn1_modules-0.2.8-py2.py3-none-any.whl (155 kB)
Collecting pyasn1>=0.3.7
  Using cached pyasn1-0.4.8-py2.py3-none-any.whl (77 kB)
Building wheels for collected packages: python-ldap
  Building wheel for python-ldap (pyproject.toml) ... error
  error: subprocess-exited-with-error

这里是一堆报错输出。。。

× Building wheel for python-ldap (pyproject.toml) did not run successfully.Collecting python-ldap
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for python-ldap
Failed to build python-ldap
ERROR: Could not build wheels for python-ldap, which is required to install pyproject.toml-based projects


    解决:

    根本原因是由于操作系统没有完整安装必要的组件导致。
    在安装应用前,请执行如下把操作系统更新至最新:

    $ sudo apt update && sudo apt upgrade   //把操作系统更新至最新
    
     
     

      执行组件更新:

      $ sudo apt-get install libsasl2-dev python3-dev libldap2-dev libssl-dev
      
       
       

        执行完成后,接着执行python-ldap安装:

        $ pip install python-ldap
        
         
         

          安装成功结果输出:

          Collecting python-ldap
            Using cached python-ldap-3.4.3.tar.gz (377 kB)
            Installing build dependencies ... done
            Getting requirements to build wheel ... done
            Preparing metadata (pyproject.toml) ... done
          Collecting pyasn1-modules>=0.1.5
            Using cached pyasn1_modules-0.2.8-py2.py3-none-any.whl (155 kB)
          Collecting pyasn1>=0.3.7
            Using cached pyasn1-0.4.8-py2.py3-none-any.whl (77 kB)
          Building wheels for collected packages: python-ldap
            Building wheel for python-ldap (pyproject.toml) ... done
            Created wheel for python-ldap: filename=python_ldap-3.4.3-cp39-cp39-linux_x86_64.whl size=326387 sha256=2ebd6bec0edb8f902b7f5140d7f5c2f09a9064900fabc273fd85f4f1a1ddc0c3
            Stored in directory: /home/jason/.cache/pip/wheels/ec/de/e6/8c0e2bd0d785d11128b46a8c5d5591457d3c63139567a37fa3
          Successfully built python-ldap
          Installing collected packages: pyasn1, pyasn1-modules, python-ldap
          Successfully installed pyasn1-0.4.8 pyasn1-modules-0.2.8 python-ldap-3.4.3
          

            报错:

            odoo安装 python-ldap 报错pyproject.toml-based,实际上,这个是一个Python3 安装报错。

            下面是原始安装报错输出:

            Collecting python-ldap
              Using cached python-ldap-3.4.3.tar.gz (377 kB)
              Installing build dependencies ... done
              Getting requirements to build wheel ... done
              Preparing metadata (pyproject.toml) ... done
            Collecting pyasn1-modules>=0.1.5
              Using cached pyasn1_modules-0.2.8-py2.py3-none-any.whl (155 kB)
            Collecting pyasn1>=0.3.7
              Using cached pyasn1-0.4.8-py2.py3-none-any.whl (77 kB)
            Building wheels for collected packages: python-ldap
              Building wheel for python-ldap (pyproject.toml) ... error
              error: subprocess-exited-with-error
            

            这里是一堆报错输出。。。

            × Building wheel for python-ldap (pyproject.toml) did not run successfully.Collecting python-ldap
            note: This error originates from a subprocess, and is likely not a problem with pip.
            ERROR: Failed building wheel for python-ldap
            Failed to build python-ldap
            ERROR: Could not build wheels for python-ldap, which is required to install pyproject.toml-based projects


              解决:

              根本原因是由于操作系统没有完整安装必要的组件导致。
              在安装应用前,请执行如下把操作系统更新至最新:

              $ sudo apt update && sudo apt upgrade   //把操作系统更新至最新
              
               
               

                执行组件更新:

                $ sudo apt-get install libsasl2-dev python3-dev libldap2-dev libssl-dev
                
                 
                 

                  执行完成后,接着执行python-ldap安装:

                  $ pip install python-ldap
                  
                   
                   

                    安装成功结果输出:

                    Collecting python-ldap
                      Using cached python-ldap-3.4.3.tar.gz (377 kB)
                      Installing build dependencies ... done
                      Getting requirements to build wheel ... done
                      Preparing metadata (pyproject.toml) ... done
                    Collecting pyasn1-modules>=0.1.5
                      Using cached pyasn1_modules-0.2.8-py2.py3-none-any.whl (155 kB)
                    Collecting pyasn1>=0.3.7
                      Using cached pyasn1-0.4.8-py2.py3-none-any.whl (77 kB)
                    Building wheels for collected packages: python-ldap
                      Building wheel for python-ldap (pyproject.toml) ... done
                      Created wheel for python-ldap: filename=python_ldap-3.4.3-cp39-cp39-linux_x86_64.whl size=326387 sha256=2ebd6bec0edb8f902b7f5140d7f5c2f09a9064900fabc273fd85f4f1a1ddc0c3
                      Stored in directory: /home/jason/.cache/pip/wheels/ec/de/e6/8c0e2bd0d785d11128b46a8c5d5591457d3c63139567a37fa3
                    Successfully built python-ldap
                    Installing collected packages: pyasn1, pyasn1-modules, python-ldap
                    Successfully installed pyasn1-0.4.8 pyasn1-modules-0.2.8 python-ldap-3.4.3
                    
                      评论
                      添加红包

                      请填写红包祝福语或标题

                      红包个数最小为10个

                      红包金额最低5元

                      当前余额3.43前往充值 >
                      需支付:10.00
                      成就一亿技术人!
                      领取后你会自动成为博主和红包主的粉丝 规则
                      hope_wisdom
                      发出的红包
                      实付
                      使用余额支付
                      点击重新获取
                      扫码支付
                      钱包余额 0

                      抵扣说明:

                      1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
                      2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

                      余额充值