一、内核配置
Device Drivers——>Input Device Support——>Miscellaneous devices——>User level driver support
drivers/input/misc/uinput.ko
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
二、以下是ubuntu下的测试用例:
1.testuinput.c
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <fcntl.h>
#include <linux/uinput.h>
int main(){
struct uinput_user_dev device;
memset(&device, 0, sizeof device);
int uinputfd = open("/dev/uinput",O_WRONLY);
strcpy(device.name, "Hillcrest Labs Virtual Pointer");
device.id.bustype = BUS_USB;
device.id.vendor = 0x1d5a; // Hillcrest Labs VID
device.id.product = 0xc2b3; // FSM, but probably doesn't matter
device.id.version = 1;
int i = 0;
for (i = 0; i < ABS_MAX; i++) {
device.absmax[i] = -1;
device.absmin[i] = -1;
device.absfuzz[i] = -1;
device.absflat[i] = -1;
}
if (write(uinputfd,&device,sizeof(device)) != sizeof(device)) {
fprintf(stderr, "Error initializing the input device.\n");
return 1;
}
if (ioctl(uinputfd, UI_SET_EVBIT, EV_REL) < 0 ||
ioctl(uinputfd, UI_SET_RELBIT, REL_X) < 0 ||
ioctl(uinputfd, UI_SET_RELBIT, REL_Y) < 0 ||
ioctl(uinputfd, UI_SET_RELBIT, REL_WHEEL) < 0 ||
ioctl(uinputfd, UI_SET_EVBIT, EV_KEY) < 0 ||
ioctl(uinputfd, UI_SET_KEYBIT, BTN_LEFT) < 0 ||
ioctl(uinputfd, UI_SET_KEYBIT, BTN_RIGHT) < 0 ||
ioctl(uinputfd, UI_SET_KEYBIT, BTN_MIDDLE) < 0 ||
ioctl(uinputfd,UI_DEV_CREATE) < 0) {
fprintf(stderr, "Error configuring the input device.\n");
return 1;
}
while(1){
};
return 0;
}
2.gcc testuinput.c -o testuinput
3.执行
./testuinput
结果:
getevent
add device 1: /dev/input/event10
name: "Hillcrest Labs Virtual Pointer"