Xilinx FPGA下载器（DLC9）的 [Labtoolstcl 44-494] 报错解决方法

在设备管理器里删除原有驱动，然后安装这个驱动（下载链接：https://download.csdn.net/download/tech06/15332381）。

可以解决 Xilinx FPGA下载器 VIVADO、XSDK 以下报错

1，报错如下：

[Labtoolstcl 44-494] There is no active target available for server at localhost.
 Targets(s) ", jsn1jsn2" may be locked by another hw_server.

2，报错如下：

Error while launching program: 
Could not find FPGA device on the board for connection 'Local'.

Troubleshooting hints:
1. Check whether board is connected to system properly.
1. In case of zynq board, check whether Digilent/Xilinx cable switch settings are correct.
1. If you are using Xilinx Platform Cable USB, ensure that status LED is green.
Could not find FPGA device on the board for connection 'Local'.

Troubleshooting hints:
1. Check whether board is connected to system properly.
1. In case of zynq board, check whether Digilent/Xilinx cable switch settings are correct.
1. If you are using Xilinx Platform Cable USB, ensure that status LED is green.