【无标题】

SiliconGo e•MMC is an embedded storage solution designed in a BGA package form. The operation of e•MMC is a simple

read and write to memory using e•MMC protocol v5.1 which is an industry standard.

The e•MMC consists of NAND flash and a MMC controller. 3.3V supply voltage is required for the NAND area (V CC ) ，

whereas 1.8V or 3.3V dual supply voltage (V CC or V CCQ ) is supported for MMC controller.

There are several advantages of e•MMC. It is easy to be used on the standard interface, which allows the easy and widely

used integration with general CPU. Any revision or amendment of NAND is invisible to the host as the embedded e•MMC

controller insulates NAND technology from the host. It means that the host can support the newest processing flash without

updating its hardware or software.

SiliconGo e•MMC has high performance at a competitive-cost, high quality and low power consumption. e•MMC provides

capacities from 4GB to 128GB.

e•MMC v5.1 compatible. Detail description is referenced by JEDEC Standard

-

(Backward compatible to e•MMC v4.5 to v5.0)



Bus mode

-

Data bus width: 1bit(default), 4bit and 8bit

-

Data transfer rate: up to 400MB/s (HS400) @ 200MHz DDR with 8bit bus width

-

MMC I/F Clock Frequency: 0~200MHz

-

MMC I/F Boot Frequency: 0~52MHz



Operating Voltage Range

-

V CC (NAND/Core): 2.7V ~ 3.6V

-

V CCQ (CTRL/IO): 1.7V ~ 1.95V / 2.7V ~ 3.6V



Temperature

-

Operation ( -25 ℃ ~ 85 ℃ )

-

Storage without operation ( -40 ℃ ~ 85 ℃ )