EEliod嵌入式实验5

实验内容：

【选做】 实现数码管的计时秒表功能，低2位为毫秒级，高2位为秒级。按键1启动计时，按键2暂停计时，按键3清零。

#include "register_variant.h"
#define LED_CS2			(*((volatile unsigned short *)(0x10300000)))
#define LED_CS3			(*((volatile unsigned short *)(0x10400000)))


#define KPC				(*((volatile unsigned int *)(0x41500000)))
#define KPDK_VALUE		(*((volatile unsigned short *)(0x41500008)))
#define KPAS_VALUE 		(*((volatile unsigned short *)(0x41500020)))	


#define	OSCR		(*(volatile unsigned long *)(osTimer_OSCR))
#define	ICPR		(*(volatile unsigned long *)(int_ICPR))

#define	OSMR0		(*(volatile unsigned long *)(0x40a00000))
#define	OSMR1		(*(volatile unsigned long *)(0x40a00004))
#define	OSMR2		(*(volatile unsigned long *)(0x40a00008))	
#define	OSMR3		(*(volatile unsigned long *)(0x40a0000c))

#define OSSR		(*(volatile unsigned long *)(0x40a00014))
#define OIER		(*(volatile unsigned long *)(0x40a0001c))

#define ICMR        (*(volatile unsigned long *)(0x40d00004))

int m=0;


void IRQ_Function(void)
{
	int g,s,b,q,i;
	int pretimer;
	int a[10]={0x40,0x79,0x24,0x30,0x19,0x12,0x02,0x78,0x00,0x10};
	i=m++;
	g=i%10;
	i/=10;
	s=i%10;
	i/=10;
	b=i%10;
	i/=10;
	q=i%10;
	if(q==6&&b==0)
	{	LED_CS2 = 0x4040;
		m=0;
	}	
	else
        LED_CS2=(a[b]<<8)+a[q];	
        
	LED_CS3=(a[g]<<8)+a[s];	
	
	OIER = 0x1;		//enable timer 0
    pretimer = OSCR;
    OSMR0 = pretimer + 36864;
	
}



void dummyOs()
{
 	int pretimer;
	
	LED_CS2 = 0x4040;
	LED_CS3 = 0x4040;
	

	
	OIER = 0x1;		//enable timer 0
    pretimer = OSCR;
    OSMR0 = pretimer + 36864;
    ICMR=0;
	m=0;
	
    while(1)
    {
 		char i;
		i = KPDK_VALUE;
    	
    	switch (i)
    	{
    		case 0x40: ICMR=0x3c000000;
    			
    		    break;
    		
    		case 0x02: ICMR=0;
    			
    		    break;
    		
    		case 0x04: m=0;
    		           ICMR=0;
    		           LED_CS2 = 0x4040;
					   LED_CS3 = 0x4040;
    	        break;
    			
    		
    		default : break;
    			
    	}	
	
    }

}