OSWorkflow + oracle 配置

本文所讲的例子是对OSWorkflow网站例子程序的完善和补充，osworkflow自带例子主要是针对内存中运行的工作流，用户，组，工作流 实例都是在内存中的。由于实际工作中，用户及组的信息是要入库的，所以本文主要讲解：OSWorkflow数据库方面的配置。读者可以先在官方下载 OSWorkflow的例子，再按以下方法修改相关配置。

我运行本例子时用的软件版本是

osworkflwo2.8.0

oracle 10g

jdk 1.5

tomcate 5.5.12

如果要成功运行本例子， 有一个地方要特别注意， 那就是oracle的驱动程序ojdbc14.jar一定要放在 Tomcate5.X / common/lib 这个目录下。

 

在下载的zip包中，有一个osworkflow-2.8.0-example.war包，可以直接在容器中解压运行。

修改如下配置文件：

1.osworkflow.xml修改成如下：该文件负责工作相关信息入库配置。

< osworkflow >
     <!--
    <persistence class="com.opensymphony.workflow.spi.memory.MemoryWorkflowStore"/>
        -->

  < persistence  class ="com.opensymphony.workflow.spi.jdbc.JDBCWorkflowStore" >
<!--  For jdbc persistence, all are required.  -->
               < property  key ="datasource"  value ="jdbc/DefaultDS" />
               <!--   注意：本配置是基于oracle数据库，如果是其他数据库，请修改entry.sequence和step.sequence对应的value   -->
               < property  key ="entry.sequence"
                     value ="SELECT seq_os_wfentry.nextval FROM dual"   />
               < property  key ="entry.table"  value ="OS_WFENTRY" />
               < property  key ="entry.id"  value ="ID" />
               < property  key ="entry.name"  value ="NAME" />
               < property  key ="entry.state"  value ="STATE" />
               < property  key ="step.sequence"
                     value ="SELECT seq_os_currentsteps.nextval FROM dual"   />
               < property  key ="history.table"  value ="OS_HISTORYSTEP" />
               < property  key ="current.table"  value ="OS_CURRENTSTEP" />
               < property  key ="historyPrev.table"  value ="OS_HISTORYSTEP_PREV" />
               < property  key ="currentPrev.table"  value ="OS_CURRENTSTEP_PREV" />
               < property  key ="step.id"  value ="ID" />
               < property  key ="step.entryId"  value ="ENTRY_ID" />
               < property  key ="step.stepId"  value ="STEP_ID" />
               < property  key ="step.actionId"  value ="ACTION_ID" />
               < property  key ="step.owner"  value ="OWNER" />
               < property  key ="step.caller"  value ="CALLER" />
               < property  key ="step.startDate"  value ="START_DATE" />
               < property  key ="step.finishDate"  value ="FINISH_DATE" />
               < property  key ="step.dueDate"  value ="DUE_DATE" />
               < property  key ="step.status"  value ="STATUS" />
               < property  key ="step.previousId"  value ="PREVIOUS_ID" />
        </ persistence >

     < factory  class ="com.opensymphony.workflow.loader.XMLWorkflowFactory" >
         < property  key ="resource"  value ="workflows.xml"   />
     </ factory >
</ osworkflow >

 

 2. osuser.xml修改成如下：该文件负责用户及组的入库配置。

注意：datasource可能必须是java:comp/env/jdbc/DefaultDS

< opensymphony-user >
     < provider  class ="com.opensymphony.user.provider.jdbc.JDBCAccessProvider" >
       < property  name ="user.table" > os_user </ property >
       < property  name ="group.table" > os_group </ property >
       < property  name ="membership.table" > os_membership </ property >
       < property  name ="user.name"   > username </ property >
       < property  name ="user.password" > passwordhash </ property >
       < property  name ="group.name" > groupname </ property >
       < property  name ="membership.userName"   > username </ property >
       < property  name ="membership.groupName" > groupname </ property >
    <!--       <property name="datasource">jdbc/DefaultDS</property> -->
        < property  name ="datasource" > java:comp/env/jdbc/DefaultDS </ property >
      </ provider >

     < provider  class ="com.opensymphony.user.provider.jdbc.JDBCCredentialsProvider" >
       < property  name ="user.table" > os_user </ property >
       < property  name ="group.table" > os_group </ property >
       < property  name ="membership.table" > os_membership </ property >
       < property  name ="user.name"   > username </ property >
       < property  name ="user.password" > passwordhash </ property >
       < property  name ="group.name" > groupname </ property >
       < property  name ="membership.userName"   > username </ property >
       < property  name ="membership.groupName" > groupname </ property >
  <!--          <property name="datasource">jdbc/DefaultDS</property> -->
       < property  name ="datasource" > java:comp/env/jdbc/DefaultDS </ property >
      </ provider >

         < provider  class ="com.opensymphony.user.provider.jdbc.JDBCProfileProvider" >
       < property  name ="user.table" > os_user </ property >
       < property  name ="group.table" > os_group </ property >
       < property  name ="membership.table" > os_membership </ property >
       < property  name ="user.name"   > username </ property >
       < property  name ="user.password" > passwordhash </ property >
       < property  name ="group.name" > groupname </ property >
       < property  name ="membership.userName"   > username </ property >
       < property  name ="membership.groupName" > groupname </ property >
  <!--      <property name="datasource">jdbc/DefaultDS</property> -->
       < property  name ="datasource" > java:comp/env/jdbc/DefaultDS </ property >
      </ provider >

     <!--
    <provider class="com.opensymphony.user.provider.memory.MemoryAccessProvider" />
    <provider class="com.opensymphony.user.provider.memory.MemoryCredentialsProvider" />
    <provider class="com.opensymphony.user.provider.memory.MemoryProfileProvider" />
     -->
     <!--
              Authenticators can take properties just like providers.
              This smart authenticator should work for &apos;most&apos; cases - it dynamically looks up
              the most appropriate authenticator for the current server.
        -->
        < authenticator  class ="com.opensymphony.user.authenticator.SmartAuthenticator"   />

</ opensymphony-user >

3. 加入propertyset.xml文件，该文件是工作流中所有属性入库的配置文件，有点像Hibernate的hbm映射文件：
 

< propertysets >
     < propertyset  name ="jdbc"
class ="com.opensymphony.module.propertyset.database.JDBCPropertySet" >
         < arg  name ="datasource"  value ="java:comp/env/jdbc/DefaultDS" />
         < arg  name ="table.name"  value ="OS_PROPERTYENTRY" />
         < arg  name ="col.globalKey"  value ="GLOBAL_KEY" />
         < arg  name ="col.itemKey"  value ="ITEM_KEY" />
         < arg  name ="col.itemType"  value ="ITEM_TYPE" />
         < arg  name ="col.string"  value ="STRING_VALUE" />
         < arg  name ="col.date"  value ="DATE_VALUE" />
         < arg  name ="col.data"  value ="DATA_VALUE" />
         < arg  name ="col.float"  value ="FLOAT_VALUE" />
         < arg  name ="col.number"  value ="NUMBER_VALUE" />
     </ propertyset >
</ propertysets >

在webapp目录下，在META-INF目录中新建一个context.xml。参考如下

<?xml version="1.0" encoding="UTF-8"?>
<Context reloadable="true" crossContext="true">
     <Resource name="jdbc/DefaultDS" auth="Container"
        type ="javax.sql.DataSource" driverClassName="oracle.jdbc.OracleDriver"
        url ="jdbc:oracle:thin:@127.0.0.1:1521:ora9i" username="oswf"
        password ="oswf" maxActive="10" maxIdle="5" maxWait="-1" />
</Context>