给VirtualBox VM新增一块桥接网卡，使用nmcli设置静态IP

需求

在给VirtualBox VM新增了一块桥接网卡，如何设置静态IP？

[root@localhost ~]# nmcli device status
DEVICE  TYPE      STATE         CONNECTION         
enp0s3  ethernet  connected     enp0s3             
enp0s8  ethernet  connected     Wired connection 1 
enp0s9  ethernet  disconnected  --                 
lo      loopback  unmanaged     --   
[root@localhost ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 08:00:27:98:34:05 brd ff:ff:ff:ff:ff:ff
    inet 10.0.2.15/24 brd 10.0.2.255 scope global dynamic noprefixroute enp0s3
       valid_lft 85239sec preferred_lft 85239sec
    inet6 fe80::a00:27ff:fe98:3405/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 08:00:27:6f:ea:e7 brd ff:ff:ff:ff:ff:ff
    inet 192.168.31.214/24 brd 192.168.31.255 scope global dynamic noprefixroute enp0s8
       valid_lft 42039sec preferred_lft 42039sec
    inet6 fe80::b617:f2d5:6043:769e/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
4: enp0s9: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 08:00:27:38:87:60 brd ff:ff:ff:ff:ff:ff

enp0s9是一块刚添加的网卡，是disconnected的状态。

使用nmcli命令，添加一个名为test-lab的连接。如下所示，

[root@localhost ~]# nmcli con add \
    type ethernet \
    con-name test-lab \
    ifname enp0s9 \
    ip4 192.168.31.161/24 \
    gw4 192.168.31.1 \
    ipv4.dns "192.168.31.1"
Connection 'test-lab' (c86aef88-fcfa-4b76-8459-2a17fc4f8c3a) successfully added.

查看连接状态，是connected的状态了，

[root@localhost ~]# nmcli device status
DEVICE  TYPE      STATE      CONNECTION         
enp0s3  ethernet  connected  enp0s3             
enp0s8  ethernet  connected  Wired connection 1 
enp0s9  ethernet  connected  test-lab           
lo      loopback  unmanaged  

再查看IP地址设置，enp0s9已经成功设置好了，

[root@localhost ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 08:00:27:98:34:05 brd ff:ff:ff:ff:ff:ff
    inet 10.0.2.15/24 brd 10.0.2.255 scope global dynamic noprefixroute enp0s3
       valid_lft 85572sec preferred_lft 85572sec
    inet6 fe80::a00:27ff:fe98:3405/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 08:00:27:6f:ea:e7 brd ff:ff:ff:ff:ff:ff
    inet 192.168.31.214/24 brd 192.168.31.255 scope global dynamic noprefixroute enp0s8
       valid_lft 42372sec preferred_lft 42372sec
    inet6 fe80::b617:f2d5:6043:769e/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
4: enp0s9: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 08:00:27:38:87:60 brd ff:ff:ff:ff:ff:ff
    inet 192.168.31.161/24 brd 192.168.31.255 scope global noprefixroute enp0s9
       valid_lft forever preferred_lft forever
    inet6 fe80::9d62:3e3e:43c:aad3/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever

总结

这就是使用nmcli为一个网卡设备添加连接信息的步骤。

参考资料

https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/networking_guide/sec-configuring_ip_networking_with_nmcli#doc-wrapperhttps://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/networking_guide/sec-configuring_ip_networking_with_nmcli#doc-wrapper