Cocoapods 安装常见问题:

一  cocoapods 的安装:

localhost:~ l$ sudo gem install cocoapods  //这种安装方式目前不行了
ERROR:  While executing gem ... (Errno::EPERM)
    Operation not permitted - /usr/bin/pod
localhost:~ l$ sudo gem install -n /usr/local/bin cocoapods   //修改为这种正确的方式
Successfully installed cocoapods-1.0.1
Parsing documentation for cocoapods-1.0.1
1 gem installed
localhost:~ l$ pod setup   //pod setup
Setting up CocoaPods master repo
  $ /usr/local/bin/git pull --ff-only
  From https://github.com/CocoaPods/Specs
     567d531..5ee9641  master     -> origin/master
  Updating 567d531..5ee9641
  Fast-forward
   Specs/BuffKit/0.16/BuffKit.podspec.json            | 40 ++++++++++++++++++++++
   Specs/EAnalytics/1.3.2/EAnalytics.podspec.json     | 26 ++++++++++++++
   Specs/Hue/1.1.1/Hue.podspec.json                   | 33 ++++++++++++++++++
   Specs/IOSVMCoreKit/1.34/IOSVMCoreKit.podspec.json  | 40 ++++++++++++++++++++++
   Specs/NMNet/0.14.11/NMNet.podspec.json             | 34 ++++++++++++++++++
   Specs/NMSDK/0.21.6/NMSDK.podspec.json              | 31 +++++++++++++++++
   Specs/SDAutoLayout/2.1.3/SDAutoLayout.podspec.json | 19 ++++++++++
   .../VersionUpdate/1.0.1/VersionUpdate.podspec.json | 22 ++++++++++++
   Specs/XHLaunchAd/1.1.4/XHLaunchAd.podspec.json     | 25 ++++++++++++++
   9 files changed, 270 insertions(+)
   create mode 100644 Specs/BuffKit/0.16/BuffKit.podspec.json
   create mode 100644 Specs/EAnalytics/1.3.2/EAnalytics.podspec.json
   create mode 100644 Specs/Hue/1.1.1/Hue.podspec.json
   create mode 100644 Specs/IOSVMCoreKit/1.34/IOSVMCoreKit.podspec.json
   create mode 100644 Specs/NMNet/0.14.11/NMNet.podspec.json
   create mode 100644 Specs/NMSDK/0.21.6/NMSDK.podspec.json
   create mode 100644 Specs/SDAutoLayout/2.1.3/SDAutoLayout.podspec.json
   create mode 100644 Specs/VersionUpdate/1.0.1/VersionUpdate.podspec.json
   create mode 100644 Specs/XHLaunchAd/1.1.4/XHLaunchAd.podspec.json
Setup completed   
localhost:~ l$ 

问题一: 出现如下图提示,说明Podfile里代码:

platform :ios, '7.0'  // :必须紧跟ios且字母要小写, 不能大写.

问题二: 出现如下图提示,说明需要在安装第三方库前加入target, 格式为:

target 'AA' do   //这里AA为我设置为自己的项目名称

问题三: 出现如下图提示,说明需要在pod安装包之后增加结束标记 end

如下图为正确的格式:  修改Podfile文件时最好用xcode打开或者用终端命令

问题四: 出现如下问题, 意思是让用xcode或终端命令工具  编辑Podfile文件:

10.11 cocoapods安装 sudo gem install -n /usr/local/bin cocoapods

localhost:~ l$ pod search fmdb
Setting up CocoaPods master repo

出现Setting up CocoaPods master repo，说明Cocoapods在将它的信息下载到 ~/.cocoapods里，cd  到该目录里，用du -sh *命令来查看文件大小，每隔几分钟查看一次，我的这个目录最终大小是123M，就是完成了