centos安装k8s，kubernetes

最新推荐文章于 2024-03-05 11:20:49 发布

Mr·葛

最新推荐文章于 2024-03-05 11:20:49 发布

阅读量2k

点赞数

文章标签： Linux安装k8s kubernetes k8s centos7

本文链接：https://blog.csdn.net/tiger199/article/details/84982052

版权

一：互相解析，关防火墙，关掉分区，三台服务器时间一致（以下操作三台都要做）

容我缕缕：

K8S 2核4G40G磁盘	192.168.3.121
node1 2核4G40G磁盘	192.168.3.193
node2 2核4G40G磁盘	192.168.3.219

kubernetes	1.10.7
flannel	flannelv0.10.0-Linux的amd64.tar
ETCD	ETCD-v3.3.8-Linux的amd64.tar
CNI	CNI-插件-AMD64-V0.7.1
docker	18.03.1-ce

链接：pan.baidu.com/s/1vhlUkQjI8hMSBM7EJbuPbA

因为谷歌翻译的问题，有几个标题可能不是很仔细，不过内容是没问题的....

一：互相解析，关防火墙，关掉分区，三台服务器时间一致（以下操作三台都要做）

1.1：互相解析
[root@k8s ~]# cat /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.3.121 k8s
192.168.3.193 node1
192.168.3.219 node2
[root@k8s ~]# scp /etc/hosts node1:/etc/hosts 
[root@k8s ~]# scp /etc/hosts node2:/etc/hosts 
1.2：关闭防火墙selinux
[root@k8s ~]# systemctl stop firewalld
[root@k8s ~]# setenforce 0
1.3：关闭swap分区
[root@k8s ~]# swapoff -a
[root@k8s ~]# vim /etc/fstab     //把/dev/mapper/centos-swap swap注释掉
1.4：时区不同，我用的tzselect 
[root@k8s ~]# tzselect 
[root@k8s ~]# cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime 
cp: overwrite ‘/etc/localtime’? y



ssh-copy-id最好传一下公钥

二：安装docker（三台都做）

2.1：卸载原有版本
[root@k8s ~]# yum remove docker docker-common docker-selinux docker-engine
2.2：安装docker所依赖驱动
[root@k8s ~]# yum install -y yum-utils device-mapper-persistent-data lvm2
2.3：添加yum源
[root@node1 ~]# yum-config-manager  --add-repo https://download.docker.com/linux/centos/docker-ce.repo
2.4：选择docker版本安装
[root@k8s ~]# yum list docker-ce --showduplicates | sort -r
2.5：选择安装18.03.1.ce
[root@k8s ~]# yum -y install docker-ce-18.03.1.ce
2.6：启动docker
[root@k8s ~]# systemctl start docker

三：安装ETCD

[root@k8s ~]# tar -zxvf etcd-v3.3.8-linux-amd64.tar.gz

[root@k8s ~]# cd etcd-v3.3.8-linux-amd64

[root@k8s etcd-v3.3.8-linux-amd64]# cp etcd etcdctl /usr/bin

[root@k8s etcd-v3.3.8-linux-amd64]# mkdir -p /var/lib/etcd /etc/etcd

所有节点均做以上操作

ETCD配置文件

三台机器都要有，略有不同，主要是两个文件

/usr/lib/systemd/system/etcd.service 和 /etc/etcd/etcd.conf

ETCD集群的主从节点关系与kubernetes集群的主从节点关系不是同的

ETCD的配置文件只是表示三个ETCD节点，ETCD集群在启动和运行过程中会选举出主节点

因此，配置文件中体现的只是三个节点ETCD-I，ETCD-II，ETCD-ⅲ

配置好三个节点的配置文件后，便可以启动ETCD集群了

K8S

[root@k8s ~]# cat  /usr/lib/systemd/system/etcd.service
[Unit]
Description=Etcd Server
After=network.target
 
[Service]
Type=notify
WorkingDirectory=/var/lib/etcd/
EnvironmentFile=/etc/etcd/etcd.conf
ExecStart=/usr/bin/etcd
 
[Install]
WantedBy=multi-user.target


[root@k8s ~]# cat /etc/etcd/etcd.conf 
# [member]
# 节点名称
ETCD_NAME=etcd-i
# 数据存放位置
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
# 监听其他Etcd实例的地址
ETCD_LISTEN_PEER_URLS="http://192.168.3.121:2380"
# 监听客户端地址
ETCD_LISTEN_CLIENT_URLS="http://192.168.3.121:2379,http://127.0.0.1:2379"
 
#[cluster]
# 通知其他Etcd实例地址
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://192.168.3.121:2380"
# 初始化集群内节点地址  //这里折行了。
ETCD_INITIAL_CLUSTER="etcd-i=http://192.168.3.121:2380,etcd-
ii=http://192.168.3.193:2380,etcd-iii=http://192.168.3.219:2380"   
# 初始化集群状态，new表示新建
ETCD_INITIAL_CLUSTER_STATE="new"
# 初始化集群token
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster-token"
# 通知客户端地址
ETCD_ADVERTISE_CLIENT_URLS="http://192.168.3.121:2379,http://127.0.0.1:2379"

节点1

[root@node1 ~]# cat /usr/lib/systemd/system/etcd.service
[Unit]
Description=Etcd Server
After=network.target
 
[Service]
Type=notify
WorkingDirectory=/var/lib/etcd/
EnvironmentFile=/etc/etcd/etcd.conf
ExecStart=/usr/bin/etcd
 
[Install]
WantedBy=multi-user.target


[root@node1 ~]# cat /etc/etcd/etcd.conf
# [member]
ETCD_NAME=etcd-ii
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="http://192.168.3.193:2380"
ETCD_LISTEN_CLIENT_URLS="http://192.168.3.193:2379,http://127.0.0.1:2379"
 
#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://192.168.3.193:2380"
ETCD_INITIAL_CLUSTER="etcd-i=http://192.168.3.121:2380,etcd-ii=http://192.168.3.193:2380,etcd-iii=http://192.168.3.219:2380"
ETCD_INITIAL_CLUSTER_STATE="new"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster-token"
ETCD_ADVERTISE_CLIENT_URLS="http://192.168.3.193:2379,http://127.0.0.1:2379"

节点2

[root@node2 ~]# cat  /usr/lib/systemd/system/etcd.service
[Unit]
Description=Etcd Server
After=network.target
 
[Service]
Type=notify
WorkingDirectory=/var/lib/etcd/
EnvironmentFile=/etc/etcd/etcd.conf
ExecStart=/usr/bin/etcd
 
[Install]
WantedBy=multi-user.target



[root@node2 ~]# cat /etc/etcd/etcd.conf
# [member]
ETCD_NAME=etcd-iii
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="http://192.168.3.219:2380"
ETCD_LISTEN_CLIENT_URLS="http://192.168.3.219:2379,http://127.0.0.1:2379"
 
#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://192.168.3.219:2380"
ETCD_INITIAL_CLUSTER="etcd-i=http://192.168.3.121:2380,etcd-ii=http://192.168.3.193:2380,etcd-iii=http://192.168.3.219:2380"
ETCD_INITIAL_CLUSTER_STATE="new"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster-token"
ETCD_ADVERTISE_CLIENT_URLS="http://192.168.3.219:2379,http://127.0.0.1:2379"

3.2：检查启动ETCD集群

[root@k8s ~]# systemctl daemon-reload

[root@k8s ~]# systemctl start etcd.service

[root@k8s ~]#  etcdctl member list
1f6e47d3e5c09902: name=etcd-i peerURLs=http://192.168.3.121:2380 clientURLs=http://127.0.0.1:2379,http://192.168.3.121:2379 isLeader=true
8059b18c36b2ba6b: name=etcd-ii peerURLs=http://192.168.3.193:2380 clientURLs=http://127.0.0.1:2379,http://192.168.3.193:2379 isLeader=false
ad715b003d53f3e6: name=etcd-iii peerURLs=http://192.168.3.219:2380 clientURLs=http://127.0.0.1:2379,http://192.168.3.219:2379 isLeader=false

[root@k8s ~]# etcdctl cluster-health
member 1f6e47d3e5c09902 is healthy: got healthy result from http://127.0.0.1:2379
member 8059b18c36b2ba6b is healthy: got healthy result from http://127.0.0.1:2379
member ad715b003d53f3e6 is healthy: got healthy result from http://127.0.0.1:2379
cluster is healthy

四：安装flannel

集群机器均需操作

flannel服务依赖ETCD，必须先安装好ETCD，并配置ETCD服务地址-etcd的端点，ETCD前缀是ETCD存储的flannel网络配置的键前缀

4.1：安装flannel

[root@k8s ~]# mkdir -p /opt/flannel/bin/

[root@k8s ~]# tar -xzvf flannel-v0.10.0-linux-amd64.tar.gz -C /opt/flannel/bin/

[root@k8s ~]# cat /usr/lib/systemd/system/flannel.service
[Unit]
Description=Flanneld overlay address etcd agent
After=network.target
After=network-online.target
Wants=network-online.target
After=etcd.service
Before=docker.service
 
[Service]
Type=notify
ExecStart=/opt/flannel/bin/flanneld -etcd-endpoints=http://192.168.3.121:2379,http://192.168.3.193:2379,http://192.168.3.219:2379 -etcd-prefix=coreos.com/network
ExecStartPost=/opt/flannel/bin/mk-docker-opts.sh -d /etc/docker/flannel_net.env -c
Restart=on-failure
 
[Install]
WantedBy=multi-user.target
RequiredBy=docker.service

执行一下命令设置flannel网络配置.(ip等信息可修改)
[root@k8s ~]# etcdctl mk /coreos.com/network/config '{"Network":"172.18.0.0/16", "SubnetMin": "172.18.1.0", "SubnetMax": "172.18.254.0",  "Backend": {"Type": "vxlan"}}'

想删除的话：etcdctl rm /coreos.com/network/config   删了后面报错

4.2：下载flannel

flannel服务依赖flannel镜像，所以要先下载flannel镜像，执行以下命令从阿里云下载，并创建镜像tag：
[root@node2 ~]# docker pull registry.cn-beijing.aliyuncs.com/k8s_images/flannel:v0.10.0-amd64

[root@node2 ~]# docker tag registry.cn-beijing.aliyuncs.com/k8s_images/flannel:v0.10.0-amd64 quay.io/coreos/flannel:v0.10.0


配置docker
flannel配置中有一项
ExecStartPost=/opt/flannel/bin/mk-docker-opts.sh -d /etc/docker/flannel_net.env -c
flannel启动后执行mk-docker-opts.sh，并生成/etc/docker/flannel_net.env文件
flannel会修改docker网络,flannel_net.env是flannel生成的docker配置参数,因此,还要修改docker配置项
/usr/lib/systemd/system/docker.service

[root@k8s ~]# cat  /usr/lib/systemd/system/docker.service
[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
# After=network-online.target firewalld.service
After=network-online.target flannel.service
Wants=network-online.target
 
[Service]
Type=notify
# the default is not to use systemd for cgroups because the delegate issues still
# exists and systemd currently does not support the cgroup feature set required
# for containers run by docker
EnvironmentFile=/etc/docker/flannel_net.env
#ExecStart=/usr/bin/dockerd $DOCKER_OPTS
ExecStart=/usr/bin/dockerd
ExecReload=/bin/kill -s HUP $MAINPID
ExecStartPost=/usr/sbin/iptables -P FORWARD ACCEPT
# Having non-zero Limit*s causes performance problems due to accounting overhead
# in the kernel. We recommend using cgroups to do container-local accounting.
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
# Uncomment TasksMax if your systemd version supports it.
# Only systemd 226 and above support this version.
#TasksMax=infinity
TimeoutStartSec=0
# set delegate yes so that systemd does not reset the cgroups of docker containers
Delegate=yes
# kill only the docker process, not all processes in the cgroup
KillMode=process
# restart the docker process if it exits prematurely
Restart=on-failure
StartLimitBurst=3
StartLimitInterval=60s
 
[Install]
WantedBy=multi-user.target



After：flannel启动之后再启动docker
EnvironmentFile：配置docker的启动参数，由flannel生成
ExecStart：增加docker启动参数
ExecStartPost：在docker启动之后执行,会修改主机的iptables路由规则。

4.3：启动flannel

[root@k8s ~]# systemctl daemon-reload

[root@k8s ~]# systemctl start flannel.service

[root@k8s ~]# systemctl restart docker.service

五：安装CNI

集群机器均需操作

CNI（Container Network Interface）容器网络接口，是Linux容器网络配置的一组标准和库，用户需要根据这些标准和库来开发自己的容器网络插件

[root@k8s ~]# mkdir -p /opt/cni/bin /etc/cni/net.d

[root@k8s ~]# tar -xzvf cni-plugins-amd64-v0.7.1.tgz -C /opt/cni/bin

[root@k8s ~]# cat  /etc/cni/net.d/10-flannel.conflist
{
  "name":"cni0",
  "cniVersion":"0.3.1",
  "plugins":[
    {
      "type":"flannel",
      "delegate":{
        "forceAddress":true,
        "isDefaultGateway":true
      }
    },
    {
      "type":"portmap",
      "capabilities":{
        "portMappings":true
      }
    }
  ]
}

六：安装K8S集群

CA证书

证书用途	命名
根证书和私钥	ca.crt，的ca.key
KUBE-API服务器证书和私钥	API服务器-key.pem，apiserver.pem
KUBE控制器的管理器/ KUBE调度器证书和私钥	cs_client.crt，cs_client.key
kubelet / KUBE-代理证书和私钥	kubelet_client.crt，kubelet_client.key

主

创建证书目录（/ CN =自己的主机名）

6.1：生成根证书和私钥

[root@k8s ~]# mkdir -p /etc/kubernetes/ca

[root@k8s ~]# cd /etc/kubernetes/ca/

[root@k8s ca]# openssl genrsa -out ca.key 2048

[root@k8s ca]# openssl req -x509 -new -nodes -key ca.key -subj "/CN=k8s" -days 5000 -out ca.crt

6.2：生成kube-apiserver证书和私钥
[root@k8s ca]# cat master_ssl.conf 
[req]
req_extensions = v3_req
distinguished_name = req_distinguished_name
[req_distinguished_name]
[ v3_req ]
basicConstraints = CA:FALSE
keyUsage = nonRepudiation, digitalSignature, keyEncipherment
subjectAltName = @alt_names
[alt_names]
DNS.1 = kubernetes
DNS.2 = kubernetes.default
DNS.3 = kubernetes.default.svc
DNS.4 = kubernetes.default.svc.cluster.local
DNS.5 = k8s
IP.1 = 172.18.0.1
IP.2 = 192.168.3.121

[root@k8s ca]# openssl genrsa -out apiserver-key.pem 2048

[root@k8s ca]# openssl req -new -key apiserver-key.pem -out apiserver.csr -subj "/CN=k8s" -config master_ssl.conf

[root@k8s ca]# openssl x509 -req -in apiserver.csr -CA ca.crt -CAkey ca.key -CAcreateserial -out apiserver.pem -days 365 -extensions v3_req -extfile master_ssl.conf
 
6.3：生成kube-controller-manager/kube-scheduler证书和私钥

[root@k8s ca]# openssl genrsa -out cs_client.key 2048

[root@k8s ca]# openssl req -new -key cs_client.key -subj "/CN=k8s" -out cs_client.csr

[root@k8s ca]# openssl x509 -req -in cs_client.csr -CA ca.crt -CAkey ca.key -CAcreateserial -out cs_client.crt -days 5000

6.4：拷贝证书到node

[root@k8s ca]# scp ca.crt ca.key node1:/etc/kubernetes/ca/

[root@k8s ca]# scp ca.crt ca.key node2:/etc/kubernetes/ca/

----------------------------------------------------------------

到这里下面这些文件少一个，就去面壁寻思寻思为啥少一个。
[root@k8s ca]# ls
apiserver.csr      apiserver.pem  ca.key  cs_client.crt  cs_client.key
apiserver-key.pem  ca.crt         ca.srl  cs_client.csr  master_ssl.conf

----------------------------------------------------------------

6.4：node1证书配置

[root@node1 ca]# openssl genrsa -out kubelet_client.key 2048

[root@node1 ca]# openssl req -new -key kubelet_client.key -subj "/CN=192.168.3.193" -out kubelet_client.csr

[root@node1 ca]# openssl x509 -req -in kubelet_client.csr  -CA ca.crt -CAkey ca.key -CAcreateserial -out kubelet_client.crt -days 5000

node2证书配置
[root@node2 ca]# openssl genrsa -out kubelet_client.key 2048

[root@node2 ca]# openssl req -new -key kubelet_client.key -subj "/CN=192.168.3.219" -out kubelet_client.csr

[root@node2 ca]# openssl x509 -req -in kubelet_client.csr  -CA ca.crt -CAkey ca.key -CAcreateserial -out kubelet_client.crt -days 5000

七：安装K8S

7.1：安装

[root@k8s bin]# tar -zxvf kubernetes-server-linux-amd64.tar.gz -C /opt

[root@k8s bin]# cd /opt/kubernetes/server/bin

[root@k8s bin]# cp -a `ls |egrep -v "*.tar|*_tag"` /usr/bin

[root@k8s bin]# mkdir -p /var/log/kubernetes

7.2：配置KUBE-API服务器

[root@k8s bin]# cat /usr/lib/systemd/system/kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=etcd.service
Wants=etcd.service
 
[Service]
EnvironmentFile=/etc/kubernetes/apiserver.conf
ExecStart=/usr/bin/kube-apiserver $KUBE_API_ARGS
Restart=on-failure
Type=notify
LimitNOFILE=65536
 
[Install]
WantedBy=multi-user.target

7.3：配置apiserver.conf

[root@k8s bin]# cat /etc/kubernetes/apiserver.conf
KUBE_API_ARGS="\
    --storage-backend=etcd3 \
    --etcd-servers=http://192.168.3.121:2379,http://192.168.3.193:2379,http://192.168.3.219:2379 \
    --bind-address=0.0.0.0 \
    --secure-port=6443  \
    --service-cluster-ip-range=172.18.0.0/16 \
    --service-node-port-range=1-65535 \
    --kubelet-port=10250 \
    --advertise-address=192.168.3.121 \
    --allow-privileged=false \
    --anonymous-auth=false \
    --client-ca-file=/etc/kubernetes/ca/ca.crt \
    --tls-private-key-file=/etc/kubernetes/ca/apiserver-key.pem \
    --tls-cert-file=/etc/kubernetes/ca/apiserver.pem \
    --enable-admission-plugins=NamespaceLifecycle,LimitRanger,NamespaceExists,SecurityContextDeny,ServiceAccount,DefaultStorageClass,ResourceQuota \
    --logtostderr=true \
    --log-dir=/var/log/kubernets \
    --v=2"

#############################
#解释说明
--etcd-servers  #连接到etcd集群
--secure-port  #开启安全端口6443
--client-ca-file、--tls-private-key-file、--tls-cert-file配置CA证书
--enable-admission-plugins  #开启准入权限
--anonymous-auth=false #不接受匿名访问,若为true,则表示接受,此处设置为false,便于dashboard访问

7.4：配置KUBE控制器的管理器（服务器引用CONF，CONF里引用YAML）

[root@k8s bin]# cat /etc/kubernetes/kube-controller-config.yaml
apiVersion: v1
kind: Config
users:
- name: controller
  user:
    client-certificate: /etc/kubernetes/ca/cs_client.crt
    client-key: /etc/kubernetes/ca/cs_client.key
clusters:
- name: local
  cluster:
    certificate-authority: /etc/kubernetes/ca/ca.crt
contexts:
- context:
    cluster: local
    user: controller
  name: default-context
current-context: default-context

7.5：配置KUBE控制器-manager.service

[root@k8s bin]# cat /usr/lib/systemd/system/kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=kube-apiserver.service
Requires=kube-apiserver.service
 
[Service]
EnvironmentFile=/etc/kubernetes/controller-manager.conf
ExecStart=/usr/bin/kube-controller-manager $KUBE_CONTROLLER_MANAGER_ARGS
Restart=on-failure
LimitNOFILE=65536
 
[Install]
WantedBy=multi-user.target

7.6：配置控制器manager.conf

[root@k8s bin]# cat /etc/kubernetes/controller-manager.conf
KUBE_CONTROLLER_MANAGER_ARGS="\
    --master=https://192.168.3.121:6443 \
    --service-account-private-key-file=/etc/kubernetes/ca/apiserver-key.pem \
    --root-ca-file=/etc/kubernetes/ca/ca.crt \
    --cluster-signing-cert-file=/etc/kubernetes/ca/ca.crt \
    --cluster-signing-key-file=/etc/kubernetes/ca/ca.key \
    --kubeconfig=/etc/kubernetes/kube-controller-config.yaml \
    --logtostderr=true \
    --log-dir=/var/log/kubernetes \
    --v=2"

#######################
master连接到master节点
service-account-private-key-file、root-ca-file、cluster-signing-cert-file、cluster-signing-key-file配置CA证书
kubeconfig是配置文件

7.7：配置KUBE-调度

[root@k8s bin]# cat /etc/kubernetes/kube-scheduler-config.yaml
apiVersion: v1
kind: Config
users:
- name: scheduler
  user:
    client-certificate: /etc/kubernetes/ca/cs_client.crt
    client-key: /etc/kubernetes/ca/cs_client.key
clusters:
- name: local
  cluster:
    certificate-authority: /etc/kubernetes/ca/ca.crt
contexts:
- context:
    cluster: local
    user: scheduler
  name: default-context
current-context: default-context



[root@k8s bin]# cat /usr/lib/systemd/system/kube-scheduler.service
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=kube-apiserver.service
Requires=kube-apiserver.service
 
[Service]
User=root
EnvironmentFile=/etc/kubernetes/scheduler.conf
ExecStart=/usr/bin/kube-scheduler $KUBE_SCHEDULER_ARGS
Restart=on-failure
LimitNOFILE=65536
 
[Install]
WantedBy=multi-user.target



[root@k8s bin]# cat /etc/kubernetes/scheduler.conf
KUBE_SCHEDULER_ARGS="\
    --master=https://192.168.3.121:6443 \
    --kubeconfig=/etc/kubernetes/kube-scheduler-config.yaml \
    --logtostderr=true \
    --log-dir=/var/log/kubernetes \
    --v=2"

7.8：启动主

[root@k8s bin]# systemctl daemon-reload

[root@k8s bin]# systemctl start kube-apiserver.service    //启动报错，就是上面配置文件的问题。

[root@k8s bin]# systemctl start kube-controller-manager.service

[root@k8s bin]# systemctl start kube-scheduler.service

7.9：日志查看

[root@k8s bin]# journalctl -xeu kube-apiserver --no-pager

[root@k8s bin]# journalctl -xeu kube-controller-manager --no-pager

[root@k8s bin]# journalctl -xeu kube-scheduler --no-pager

# 实时查看加 -f

节点安装K8S（下面这些两个节点都要做）

[root@node1 ~]# tar -zxvf kubernetes-server-linux-amd64.tar.gz -C /opt

[root@node1 ~]# cd /opt/kubernetes/server/bin

[root@node1 bin]# cp -a kubectl kubelet kube-proxy /usr/bin/

[root@node1 bin]# mkdir -p /var/log/kubernetes

[root@node1 bin]# cat /etc/sysctl.d/k8s.conf 
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
# 修改内核参数,iptables过滤规则生效.如果未用到可忽略

[root@node1 bin]# sysctl -p #配置生效

节点1：配置kubelet

[root@node1 bin]# cat /etc/kubernetes/kubelet-config.yaml
apiVersion: v1
kind: Config
users:
- name: kubelet
  user:
    client-certificate: /etc/kubernetes/ca/kubelet_client.crt
    client-key: /etc/kubernetes/ca/kubelet_client.key
clusters:
- cluster:
    certificate-authority: /etc/kubernetes/ca/ca.crt
    server: https://192.168.3.121:6443
  name: local
contexts:
- context:
    cluster: local
    user: kubelet
  name: default-context
current-context: default-context
preferences: {}

[root@node1 bin]# cat /usr/lib/systemd/system/kubelet.service
[Unit]
Description=Kubelet Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=docker.service
Requires=docker.service
 
[Service]
EnvironmentFile=/etc/kubernetes/kubelet.conf
ExecStart=/usr/bin/kubelet $KUBELET_ARGS
Restart=on-failure
 
[Install]
WantedBy=multi-user.target

[root@node1 bin]# cat /etc/kubernetes/kubelet.conf
KUBELET_ARGS="\
    --kubeconfig=/etc/kubernetes/kubelet-config.yaml \
    --pod-infra-container-image=registry.aliyuncs.com/archon/pause-amd64:3.0 \
    --hostname-override=192.168.3.193 \
    --network-plugin=cni \
    --cni-conf-dir=/etc/cni/net.d \
    --cni-bin-dir=/opt/cni/bin \
    --logtostderr=true \
    --log-dir=/var/log/kubernetes \
    --v=2"
---------------------------------------------------------------------
###################
--hostname-override  #配置node名称 建议使用node节点的IP
#--pod-infra-container-image=gcr.io/google_containers/pause-amd64:3.0 \
--pod-infra-container-image #指定pod的基础镜像 默认是google的,建议改为国内,或者FQ
或者 下载到本地重新命名镜像

docker pull registry.cn-hangzhou.aliyuncs.com/google-containers/pause-amd64:3.0
docker tag registry.cn-hangzhou.aliyuncs.com/google-containers/pause-amd64:3.0 gcr.io/google_containers/pause-amd64:3.0

--kubeconfig #为配置文件

配置KUBE-代理

[root@node1 bin]# cat /etc/kubernetes/proxy-config.yaml
apiVersion: v1
kind: Config
users:
- name: proxy
  user:
    client-certificate: /etc/kubernetes/ca/kubelet_client.crt
    client-key: /etc/kubernetes/ca/kubelet_client.key
clusters:
- cluster:
    certificate-authority: /etc/kubernetes/ca/ca.crt
    server: https://192.168.3.121:6443
  name: local
contexts:
- context:
    cluster: local
    user: proxy
  name: default-context
current-context: default-context
preferences: {}

[root@node1 bin]# cat /usr/lib/systemd/system/kube-proxy.service
[Unit]
Description=Kube-Proxy Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target
Requires=network.service
 
[Service]
EnvironmentFile=/etc/kubernetes/proxy.conf
ExecStart=/usr/bin/kube-proxy $KUBE_PROXY_ARGS
Restart=on-failure
LimitNOFILE=65536
 
[Install]
WantedBy=multi-user.target

[root@node1 bin]# cat /etc/kubernetes/proxy.conf
KUBE_PROXY_ARGS="\
    --master=https://192.168.3.121:6443 \
    --hostname-override=192.168.3.193 \
    --kubeconfig=/etc/kubernetes/proxy-config.yaml \
    --logtostderr=true \
    --log-dir=/var/log/kubernetes \
    --v=2"

节点2：配置kubelet

[root@node2 bin]# cat /etc/kubernetes/kubelet-config.yaml
apiVersion: v1
kind: Config
users:
- name: kubelet
  user:
    client-certificate: /etc/kubernetes/ca/kubelet_client.crt
    client-key: /etc/kubernetes/ca/kubelet_client.key
clusters:
- cluster:
    certificate-authority: /etc/kubernetes/ca/ca.crt
    server: https://192.168.3.121:6443
  name: local
contexts:
- context:
    cluster: local
    user: kubelet
  name: default-context
current-context: default-context
preferences: {}

[root@node2 bin]# cat /usr/lib/systemd/system/kubelet.service
[Unit]
Description=Kubelet Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=docker.service
Requires=docker.service
 
[Service]
EnvironmentFile=/etc/kubernetes/kubelet.conf
ExecStart=/usr/bin/kubelet $KUBELET_ARGS
Restart=on-failure
 
[Install]
WantedBy=multi-user.target

[root@node2 bin]# cat /etc/kubernetes/kubelet.conf
KUBELET_ARGS="\
    --kubeconfig=/etc/kubernetes/kubelet-config.yaml \
    --pod-infra-container-image=registry.aliyuncs.com/archon/pause-amd64:3.0 \
    --hostname-override=192.168.3.219 \
    --network-plugin=cni \
    --cni-conf-dir=/etc/cni/net.d \
    --cni-bin-dir=/opt/cni/bin \
    --logtostderr=true \
    --log-dir=/var/log/kubernetes \
    --v=2"
---------------------------------------------------------------------------------
###################
--hostname-override  #配置node名称 建议使用node节点的IP
#--pod-infra-container-image=gcr.io/google_containers/pause-amd64:3.0 \
--pod-infra-container-image #指定pod的基础镜像 默认是google的,建议改为国内,或者FQ
或者 下载到本地重新命名镜像

docker pull registry.cn-hangzhou.aliyuncs.com/google-containers/pause-amd64:3.0
docker tag registry.cn-hangzhou.aliyuncs.com/google-containers/pause-amd64:3.0 gcr.io/google_containers/pause-amd64:3.0

--kubeconfig #为配置文件

配置KUBE-代理

[root@node2 bin]# cat /etc/kubernetes/proxy-config.yaml
apiVersion: v1
kind: Config
users:
- name: proxy
  user:
    client-certificate: /etc/kubernetes/ca/kubelet_client.crt
    client-key: /etc/kubernetes/ca/kubelet_client.key
clusters:
- cluster:
    certificate-authority: /etc/kubernetes/ca/ca.crt
    server: https://192.168.3.121:6443
  name: local
contexts:
- context:
    cluster: local
    user: proxy
  name: default-context
current-context: default-context
preferences: {}

[root@node2 bin]# cat /usr/lib/systemd/system/kube-proxy.service
[Unit]
Description=Kube-Proxy Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target
Requires=network.service
 
[Service]
EnvironmentFile=/etc/kubernetes/proxy.conf
ExecStart=/usr/bin/kube-proxy $KUBE_PROXY_ARGS
Restart=on-failure
LimitNOFILE=65536
 
[Install]
WantedBy=multi-user.target

[root@node2 bin]# cat /etc/kubernetes/proxy.conf
KUBE_PROXY_ARGS="\
    --master=https://192.168.3.121:6443 \
    --hostname-override=192.168.3.219 \
    --kubeconfig=/etc/kubernetes/proxy-config.yaml \
    --logtostderr=true \
    --log-dir=/var/log/kubernetes \
    --v=2"


---------------------------------------------------
--hostname-override  #配置node名称,要与kubelet对应，kubelet配置了，则kube-proxy也要配置
--master  #连接master服务
--kubeconfig #为配置文件

启动节点，日志查看（两节点都做）

[root@node2 bin]# systemctl daemon-reload

[root@node2 bin]# systemctl start kubelet.service

[root@node2 bin]# systemctl start kube-proxy.service

[root@node2 bin]# journalctl -xeu kubelet --no-pager

[root@node2 bin]# journalctl -xeu kube-proxy --no-pager

# 实时查看加 -f

主上查看节点

[root@k8s ~]# kubectl get nodes
NAME            STATUS    ROLES     AGE       VERSION
192.168.3.193   Ready     <none>    19m       v1.10.7
192.168.3.219   Ready     <none>    19m       v1.10.7

集群测试（配置nginx测试文件（master doing））

[root@k8s bin]# cat nginx-rc.yaml
apiVersion: v1
kind: ReplicationController
metadata:
  name: nginx-rc
  labels:
    name: nginx-rc
spec:
  replicas: 2
  selector:
    name: nginx-pod
  template:
    metadata:
      labels: 
        name: nginx-pod
    spec:
      containers:
      - name: nginx
        image: nginx
        imagePullPolicy: IfNotPresent
        ports:
        - containerPort: 80

[root@k8s bin]# cat nginx-svc.yaml
apiVersion: v1
kind: Service
metadata:
  name: nginx-service
  labels: 
    name: nginx-service
spec:
  type: NodePort
  ports:
  - port: 80
    protocol: TCP
    targetPort: 80
    nodePort: 30081
  selector:
    name: nginx-pod

启动YAML文件

[root@k8s bin]# kubectl create -f nginx-rc.yaml

[root@k8s bin]# kubectl create -f nginx-svc.yaml

#查看pod创建情况：
[root@k8s bin]# kubectl get pod -o wide
NAME             READY     STATUS              RESTARTS   AGE       IP        NODE
nginx-rc-9qv8g   0/1       ContainerCreating   0          6s        <none>    192.168.3.193
nginx-rc-gksh9   0/1       ContainerCreating   0          6s        <none>    192.168.3.219


浏览器访问http://node-ip:30081/
出现NGINX页面就OK

可以使用以下命令来删除服务及nginx的部署：
[root@k8s bin]# kubectl delete -f nginx-svc.yaml

[root@k8s bin]# kubectl delete -f nginx-rc.yaml

八：k8s界面安装WEB UI

下载仪表板YAML

[root@k8s ~]# wget https://raw.githubusercontent.com/kubernetes/dashboard/master/src/deploy/recommended/kubernetes-dashboard.yaml

修改文件kubernetes，dashboard.yaml

image 那里 要修改下.默认的地址被墙了

#image: k8s.gcr.io/kubernetes-dashboard-amd64:v1.10.0
image: mirrorgooglecontainers/kubernetes-dashboard-amd64:v1.8.3
---------------------------------------------------------------
kind: Service
apiVersion: v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kube-system
spec:
  ports:
    - port: 443
      targetPort: 8443
  selector:
    k8s-app: kubernetes-dashboard

##############修改后#############

kind: Service
apiVersion: v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kube-system
spec:
  type: NodePort
  ports:
    - port: 443
      targetPort: 8443
      nodePort: 30000
  selector:
    k8s-app: kubernetes-dashboard

添加type:NodePort
暴露端口  ：30000

创建权限控制YAML

[root@k8s ~]# cat dashboard-admin.yaml
apiVersion: rbac.authorization.k8s.io/v1beta1  
kind: ClusterRoleBinding  
metadata:  
  name: kubernetes-dashboard  
  labels:  
    k8s-app: kubernetes-dashboard  
roleRef:  
  apiGroup: rbac.authorization.k8s.io  
  kind: ClusterRole  
  name: cluster-admin  
subjects:  
- kind: ServiceAccount  
  name: kubernetes-dashboard  
  namespace: kube-system

创建，查看

[root@k8s ~]# kubectl create -f kubernetes-dashboard.yaml

[root@k8s ~]# kubectl create -f dashboard-admin.yaml

[root@k8s ~]# kubectl  get pods --all-namespaces -o wide
NAMESPACE     NAME                                    READY     STATUS    RESTARTS   AGE       IP            NODE
default       nginx-rc-9qv8g                          1/1       Running   0          26m       172.18.19.2   192.168.3.193
default       nginx-rc-gksh9                          1/1       Running   0          26m       172.18.58.2   192.168.3.219
kube-system   kubernetes-dashboard-66c9d98865-k84kb   1/1       Running   0          23m       172.18.58.3   192.168.3.219

访问

成功后可以直接访问 https：//开头开头NODE_IP：的配置端口

我这边英文的 https://192.168.3.193:30000

访问会提示登录。我们采取令牌登录

[root@k8s ~]# kubectl -n kube-system describe secret $(kubectl -n kube-system get secret | grep admin-user | awk '{print $1}') | grep token

大佬博客：https：//blog.dl1548.site/2018/09/18/%E4%BA%8C%E8%BF%9B%E5%88%B6%E5%AE%89%E8%A3%85kubernetes ％E9％9B％86％E7％BE％A4 /

https://juejin.im/post/5b46100de51d4519105d37e3

Mr·葛

关注

0
点赞
踩
5

收藏

觉得还不错? 一键收藏
0
评论
centos安装k8s，kubernetes

目录一：互相解析，关防火墙，关掉分区，三台服务器时间一致（以下操作三台都要做）二：安装docker（三台都做）三：安装ETCD四：安装flannel五：安装CNI六：安装K8S集群七：安装K8S八：k8s界面安装WEB UI容我缕缕：K8S 2核4G40G磁盘 192.168.3.121 node1 2核4G40G磁盘 192.168.3.1...
复制链接

扫一扫