好不容易在我64的win7下装好了RedHat,和大家分享一下几个麻烦的地方:
1 教程
安装教程还是很多的,基本上掌握流程就好,版本可以调自己合适的,教程如:http://www.linuxidc.com/Linux/2010-08/27449.htm
2 小红帽镜像:rhel-server-6.2-x86_64-dvd.iso
我下了好几个镜像都不兼容,最后用了一个版本比较低的,相对稳定点些,反正我是装来练练手的,足矣。
3 虚拟机工具:VMware-workstation-9.0.2
VMware还是比较有名的,网上下载资源多,而且用着方便,不过需要破解。注册机:http://download.csdn.net/detail/tiwerbao/5983919
4 需要设置CUP支持VT(VirtualizationTechnology),我刚开始没弄,直接报错了:
You have configured this virtual machine to use a 64-bit guest operating system. However, 64-bit operation is not possible. This host is VT-capable, but VT is disabled.
This is usually because VT has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting. Please:
(1) Verify that the BIOS/firmware settings enable VT and disable ‘trusted execution.’
(2) Power-cycle the host, if either of these BIOS/firmware settings have been changed.
(3) Power-cycle the host, if you have not done so since installing VMware Workstation.
(4) Update the host’s BIOS/firmware to the latest version. For more detailed information, see
http://vmware.com/info?id=152.
首先,我找了个CPU检查工具,看看是否可支持VT。我用的是CPU-Z :http://download.csdn.net/detail/tiwerbao/5983937
如下图,在指令集一行有VT的标识。
另外需要到BIOS去设置一下 (我的ThinkPad x220,开机按F1):BIOS Setup Utilityà Intel(R) Virtualization Technology ==>设置为 Enabled
最后,大功告成: