硬盘分区和格式化
MBR/msdos分区模式
1-4个主分区,或者0-3个主分区+1个扩展分区(n个逻辑分区)
最大支持的容量为2.2TB的磁盘
扩展分区不能格式化
GPT分区模式
对于磁盘分区个数没有限制,受操作系统限制
最大支持18EB
要求
熟悉硬盘分区结构,使用fdisk分区工具在磁盘 /dev/vdb 上按以下要求建立分区:
采用默认的 MBR/msdos 分区模式
第1个分区 /dev/vdb1 的大小为 200MiB
第2个分区 /dev/vdb2 的大小为 2000MiB
第3个分区 /dev/vdb3 的大小为 1000MiB
完成分区后,能够配置开机自动挂载 /dev/vdb2 分区:
文件系统类型为 EXT4
将其挂载到 /mnt/part2 目录
方案:
fdisk分区工具用来建立msdos分区方案,其交互模式中的主要指令如下:
m:列出指令帮助
p:查看当前的分区表信息
n:新建分区
d:删除分区
t:更改分区标识
q:放弃分区更改并退出
w:保存对分区表所做的更改
步骤:
步骤一:新建分区表
1)打开fdisk工具,操作磁盘/dev/vdb
[root@server0 ~]# fdisk /dev/vdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x9ac1bc10.
Command (m for help):
2)新建第一个分区/dev/vdb1
Command (m for help): n //新建分区
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p //类型为p(主分区)
Partition number (1-4, default 1): 1 //分区编号1
First sector (2048-20971519, default 2048): //起始位置默认
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-20971519, default 20971519): +200M
Partition 1 of type Linux and of size 200 MiB is set //结束位置+200MiB大小
Command (m for help): p //确认当前分区表
.. ..
Device Boot Start End Blocks Id System
/dev/vdb1 2048 411647 204800 83 Linux
3)新建第二个分区/dev/vdb2
Command (m for help): n
Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): p //类型为p(主分区)
Partition number (2-4, default 2): 2 //分区编号2
First sector (411648-20971519, default 411648): //起始位置默认
Using default value 411648
Last sector, +sectors or +size{K,M,G} (411648-20971519, default 20971519): +2000M
Partition 2 of type Linux and of size 2 GiB is set //结束位置+2000MiB大小
Command (m for help): p //确认当前分区表
.. ..
Device Boot Start End Blocks Id System
/dev/vdb1 2048 411647 204800 83 Linux
/dev/vdb2 411648 4507647 2048000 83 Linux
4)新建第三个分区/dev/vdb3
Command (m for help): n
Partition type:
p primary (2 primary, 0 extended, 2 free)
e extended
Select (default p): p
Partition number (3,4, default 3): 3
First sector (4507648-20971519, default 4507648):
Using default value 4507648
Last sector, +sectors or +size{K,M,G} (4507648-20971519, default 20971519): +1000M
Partition 3 of type Linux and of size 1000 MiB is set
Command (m for help): p //确认当前分区表
.. ..
Device Boot Start End Blocks Id System
/dev/vdb1 2048 411647 204800 83 Linux
/dev/vdb2 411648 4507647 2048000 83 Linux
/dev/vdb3 4507648 6555647 1024000 83 Linux
5)调整分区类型标识(可选)
将/dev/vdb1的类型(默认为83,表示EXT2/3/4分区)修改为8e(LVM设备):
Command (m for help): t //修改分区类型标识
Partition number (1-3, default 3): 1 //指定第1个分区
Hex code (type L to list all codes): 8e //类型改为8e
Changed type of partition 'Linux' to 'Linux LVM'
Command (m for help): p //确认当前分区表
.. ..
Device Boot Start End Blocks Id System
/dev/vdb1 2048 411647 204800 8e Linux LVM
/dev/vdb2 411648 4507647 2048000 83 Linux
/dev/vdb3 4507648 6555647 1024000 83 Linux
6)保存分区更改,退出fdisk分区工具
Command (m for help): w //保存并退出
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
6)刷新分区表
[root@server0 ~]# partprobe /dev/vdb //重新检测磁盘分区
//或者
[root@server0 ~]# reboot //对已使用中磁盘的分区调整,应该重启一次
.. ..
步骤二:格式化及挂载分区
1)将分区/dev/vdb2格式化为EXT4文件系统
[root@server0 ~]# mkfs.ext4 /dev/vdb2
.. ..
Allocating group tables: done
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
2)配置开机自动挂载
[root@server0 ~]# vim /etc/fstab
.. ..
/dev/vdb2 /mnt/part2 ext4 defaults 0 0
3)创建挂载点,并验证挂载配置
[root@server0 ~]# mkdir /mnt/part2 //创建挂载点
[root@server0 ~]# mount -a //挂载fstab中的可用设备
[root@server0 ~]# df -hT /mnt/part2/ //检查文档所在的文件系统及设备
Filesystem Type Size Used Avail Use% Mounted on
/dev/vdb2 ext4 1.9G 5.9M 1.8G 1% /mnt/part2