简单的OSPF实验

网上类似的实验多如牛毛，我写这个目的是为了巩固一下，其实好早好早之前就想学ospf,但是我实在太懒散了，不晓得现在还来不来得及。

废话到此为止，开工

拓扑如下：

目的，通过OSPF，将如上各个路由器全部打通

R1配置：

R1#conf t 
R1(config)#interface loopback 0
R1(config-if)#ip address 1.1.1.1 255.255.255.255
R1(config-if)#exit   
R1(config)#interface fastEthernet 0/0
R1(config-if)#no shut
R1(config-if)#ip addr 192.168.100.1 255.255.255.0
R1(config-if)#exit
R1(config)#interface serial 1/0
R1(config-if)#ip add 172.100.100.2 255.255.255.0
R1(config-if)#no shut
R1(config-if)#exit
R1(config)#router ospf 1
R1(config-router)#router-id 1.1.1.1
R1(config-router)#network 1.1.1.1 0.0.0.0 area 0
R1(config-router)#network 192.168.100.0 0.0.0.255 area 0
R1(config-router)#network 172.100.100.0 0.0.0.255 area 0
R1(config)#

R2配置

conf t 
interface loopback 0
ip address 2.2.2.2 255.255.255.255
exit   
interface fastEthernet 0/0
no shut
ip addr 192.168.100.2 255.255.255.0
exit
router ospf 1
router-id 2.2.2.2
network 2.2.2.2 0.0.0.0 area 0
network 192.168.100.0 0.0.0.255 area 0

R3配置

conf t 
interface loopback 0
ip address 3.3.3.3 255.255.255.255
exit   
interface fastEthernet 0/0
no shut
ip addr 192.168.100.3 255.255.255.0
exit
router ospf 1
router-id 3.3.3.3
network 3.3.3.3 0.0.0.0 area 0
network 192.168.100.0 0.0.0.255 area 0

R4配置

conf t 
interface loopback 0
ip address 4.4.4.4 255.255.255.255
exit   
interface fastEthernet 0/0
no shut
ip addr 192.168.100.4 255.255.255.0
exit
router ospf 1
router-id 4.4.4.4
network 4.4.4.4 0.0.0.0 area 0
network 192.168.100.0 0.0.0.255 area 0

R5配置

conf t 
interface loopback 0
ip address 5.5.5.5 255.255.255.255
exit   
interface serial 1/0
ip add 172.100.100.1 255.255.255.0
no shut
exit
router ospf 1
router-id 5.5.5.5
network 5.5.5.5 0.0.0.0 area 0
network 172.100.100.0 0.0.0.255 area 0

查看邻居

R1# show ip ospf neighbor 

Neighbor ID     Pri   State           Dead Time   Address         Interface
5.5.5.5           0   FULL/  -        00:00:39    172.100.100.1   Serial1/0
2.2.2.2           1   FULL/BDR        00:00:38    192.168.100.2   FastEthernet0/0
3.3.3.3           1   FULL/DROTHER    00:00:38    192.168.100.3   FastEthernet0/0
4.4.4.4           1   FULL/DROTHER    00:00:38    192.168.100.4   FastEthernet0/0
R1#

查看OSPF数据库

R4#show ip ospf database 

            OSPF Router with ID (4.4.4.4) (Process ID 1)

                Router Link States (Area 0)

Link ID         ADV Router      Age         Seq#       Checksum Link count
1.1.1.1         1.1.1.1         229         0x80000006 0x00468D 4
2.2.2.2         2.2.2.2         610         0x80000003 0x000366 2
3.3.3.3         3.3.3.3         511         0x80000003 0x001745 2
4.4.4.4         4.4.4.4         424         0x80000003 0x002B24 2
5.5.5.5         5.5.5.5         233         0x80000003 0x005D08 3

                Net Link States (Area 0)

Link ID         ADV Router      Age         Seq#       Checksum
192.168.100.1   1.1.1.1         424         0x80000003 0x00181D
R4#

查看路由表，前面有标识C的，表示直连路由，有标识O的表示通过OSPF学习到的路由

R4#show ip route 
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     1.0.0.0/32 is subnetted, 1 subnets
O       1.1.1.1 [110/2] via 192.168.100.1, 00:04:23, FastEthernet0/0
     2.0.0.0/32 is subnetted, 1 subnets
O       2.2.2.2 [110/2] via 192.168.100.2, 00:04:23, FastEthernet0/0
     3.0.0.0/32 is subnetted, 1 subnets
O       3.3.3.3 [110/2] via 192.168.100.3, 00:04:23, FastEthernet0/0
     4.0.0.0/32 is subnetted, 1 subnets
C       4.4.4.4 is directly connected, Loopback0
     5.0.0.0/32 is subnetted, 1 subnets
O       5.5.5.5 [110/66] via 192.168.100.1, 00:04:24, FastEthernet0/0
     172.100.0.0/24 is subnetted, 1 subnets
O       172.100.100.0 [110/65] via 192.168.100.1, 00:04:24, FastEthernet0/0
C    192.168.100.0/24 is directly connected, FastEthernet0/0
R4#

ping 测试，任何一个节点上ping环回地址，192.168.100.0/24地址，172.100.100.0/24的地址均可达

R4#ping 1.1.1.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 16/32/52 ms
R4#ping 192.168.100.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.100.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 20/34/44 ms
R4#ping 172.100.100.2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.100.100.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/15/36 ms
R4#