C--如何定义复杂的类型声明

Even relatively new C programmers have no trouble reading simple C declarations such as

int      foo[5];     // foo is an array of 5 ints
char    *foo;        // foo is a pointer to char
double   foo();      // foo is a function returning a double

but as the declarations get a bit more involved, it's more difficult to know exactly what you're looking at.

char *(*(**foo[][8])())[]; // huh ?????

It turns out that the rules for reading an arbitrarily-complex C variable declaration are easily learned by even beginning programmers (though how to actually use the variable so declared may be well out of reach).

This Tech Tip shows how to do it.

Basic and Derived Types

In addition to one variable name, a declaration is composed of one "basic type" and zero or more "derived types", and it's crucial to understand the distinction between them.

The complete list of basic types is:

• char	• signed char	• unsigned char
• short	• unsigned short
• int	• unsigned int
• long	• unsigned long
• float	• double	• void
• struct tag	• union tag	• enum tag
• long long	• unsigned long long	• long double	ANSI/ISO C only

A declaration can have exactly one basic type, and it's always on the far left of the expression.

The "basic types" are augmented with "derived types", and C has three of them:

*   pointer to...

This is denoted by the familiar  * character, and it should be self evident that a pointer always has to point  to something.

[]   array of...

"Array of" can be undimensioned --  [] -- or dimensioned --  [10] -- but the sizes don't really play significantly into reading a declaration. We typically include the size in the description. It should be clear that arrays have to be "arrays  of" something.

()   function returning...

This is usually denoted by a pair of parentheses together -  () - though it's also possible to find a prototype parameter list inside. Parameters lists (if present) don't really play into reading a declaration, and we typically ignore them. We'll note that parens used to represent "function returning" are different than those used for grouping: grouping parens  surround the variable name, while "function returning" parens are always on the right.

Functions are meaningless unless they  return something (and we accommodate the  void type by waving the hand and pretend that it's "returning" void).

A derived type always modifies something that follows, whether it be the basic type or another derived type, and to make a declaration read properly one must always include the preposition ("to", "of", "returning"). Saying "pointer" instead of "pointer to" will make your declarations fall apart.

It's possible that a type expression may have no derived types (e.g., "int i" describes "i is an int"), or it can have many. Interpreting the derived types is usually the sticking point when reading a complex declaration, but this is resolved with operator precedence in the next section.

Operator Precedence

Almost every C programmer is familiar with the operator precedence tables, which give rules that say (for instance) multiply and divide have higher precedence than ("are preformed before") addition or subtraction, and parentheses can be used to alter the grouping. This seems natural for "normal" expressions, but the same rules do indeed apply to declarations - they are type expressions rather than computational ones.

The "array of" [] and "function returning" () type operators have higher precedence than "pointer to" *, and this leads to some fairly straightforward rules for decoding.

Always start with the variable name:

foo is ...

and always end with the basic type:

foo is ...  int

The "filling in the middle" part is usually the trickier part, but it can be summarize with this rule:

"go right when you can, go left when you must"

Working your way out from the variable name, honor the precedence rules and consume derived-type tokens to the right as far as possible without bumping into a grouping parenthesis. Then go left to the matching paren.

A simple example

We'll start with a simple example:

long **foo[7];

We'll approach this systematically, focusing on just one or two small part as we develop the description in English. As we do it, we'll show the focus of our attention in red, and  strike out  the parts we've finished with.

long ** foo [7];

Start with the variable name and end with the basic type:

foo is ...  long

long  **  foo [7];

At this point, the variable name is touching two derived types: "array of 7" and "pointer to", and the rule is to go right when you can, so in this case we consume the "array of 7"

foo is  array of 7 ...  long

long  * *  foo[7] ;

Now we've gone as far right as possible, so the innermost part is only touching the "pointer to" - consume it.

foo is  array of 7  pointer to ...  long

long   *  *foo[7] ;

The innermost part is now only touching a "pointer to", so consume it also.

foo is  array of 7  pointer to  pointer to  long

This completes the declaration!

A hairy example

To really test our skills, we'll try a very complex declaration that very well may never appear in real life (indeed: we're hard-pressed to think of how this could actually be used). But it shows that the rules scale to very complex declarations.

char *(*(** foo [][8])())[];

All declaration start out this way: "variable name is .... basictype"

foo is ...  char

char  *(*(** foo [] [8])())[];

The innermost part touches "array of" and "pointer to" - go right.

foo is  array of ...  char

char  *(*(** foo[] [8])())[];

It's common in a declaration to alternate right and left, but this is not the rule: the rule is to go as far right as we can, and here we find that the innermost part still touches "array of" and "pointer to". Again, go right.

foo is  array of  array of 8 ...  char

char  *(*(* *  foo[][8] )())[];

Now we've hit parenthesis used for grouping, and this halts our march to the right. So we have to backtrack to collect all the parts to the left (but only as far as the paren). This consumes the "pointer to":

foo is  array of  array of 8  pointer to ...  char

char  *(*( *  *foo[][8] )())[];

Again we are backtracking to the left, so we consume the next "pointer to":

foo is  array of  array of 8  pointer to  pointer to ...  char

char  *(* (**foo[][8]) ())[];

After consuming the "pointer to" in the previous step, this finished off the entire parenthesized subexpression, so we "consume" the parens too. This leaves the innermost part touching "function returning" on the right, and "pointer to" on the left - go right:

foo is  array of  array of 8  pointer to  pointer to  function returning ...  char

char  *( *  (**foo[][8])()  )[];

Again we hit grouping parenthesis, so backtrack to the left:

foo is  array of  array of 8  pointer to  pointer to  function returning  pointer to ...  char

char  *  (*(**foo[][8])()) [];

Consuming the grouping parentheses, we then find that the innermost part is touching "array of" on the right, and "pointer to" on the left. Go right:

foo is  array of  array of 8  pointer to  pointer to  function returning  pointer to  array of ...  char

char   *  (*(**foo[][8])())[] ;

Finally we're left with only "pointer to" on the left: consume it to finish the declaration.

foo is  array of  array of 8  pointer to  pointer to  function returning  pointer to  array of  pointer to  char

We have no idea how this variable is useful, but at least we can describe the type correctly.

Abstract Declarators

The C standard describes an "abstract declarator", which is used when a type needs to be described but not associated with a variable name. These occur in two places -- casts, and as arguments to sizeof -- and they can look intimidating:

int (*(*)())()

To the obvious question of "where does one start?", the answer is "find where the variable name would go, then treat it like a normal declaration". There is only one place where a variable name could possibly go, and locating it is actually straightforward. Using the syntax rules, we know that:

• to the right of all the "pointer to" derived type tokens
• to the left of all "array of" derived type tokens
• to the left of all "function returning" derived type tokens
• inside all the grouping parentheses

Looking at the example, we see that the rightmost "pointer to" sets one boundary, and the leftmost "function returning" sets another one:

int (*(*  • ) •  ())()

The red • indicators show the only two places that could possibly hold the variable name, but the leftmost one is the only one that fits the "inside the grouping parens" rule. This gives us our declaration as:

int (*(*foo)())()

which our "normal" rules describe as:

foo is a pointer to function returning pointer to function returning int

Semantic restrictions/notes

Not all combinations of derived types are allowed, and it's possible to create a declaration that perfectly follows the syntax rules but is nevertheless not legal in C (e.g., syntactically valid but semantically invalid). We'll touch on them here.

Can't have arrays of functions

Use "array of pointer to function returning..." instead.

Functions can't return functions

Use "function returning pointer to function returning..." instead.

Functions can't return arrays

Use "function returning pointer to array of..." instead.

In arrays, only the leftmost [] can be undimensioned

C supports multi-dimensional arrays (e.g.,  char foo[1][2][3][4]), though in practice this often suggests poor data structuring. Nevertheless, when there is more than one array dimension, only the leftmost one is allowed to be empty.  char foo[] and  char foo[][5] are legal, but  char foo[5][] is not.

"void" type is restricted

Since  void is a special pseudo-type, a variable with this basic type is only legal with a final derived type of "pointer to" or "function returning". It's not legal to have "array of void" or to declare a variable of just type "void" without any derived types.

void *foo;            // legal
void foo();           // legal
void foo;             // not legal
void foo[];           // not legal

Adding calling-convention types

On the Windows platform, it's common to decorate a function declaration with an indication of its calling convention. These tell the compiler which mechanism should be used to call the function in question, and the method used to call the function must be the same one which the function expects. They look like:

extern int __cdecl main(int argc, char **argv);

extern BOOL __stdcall DrvQueryDriverInfo(DWORD dwMode, PVOID pBuffer,
                              DWORD cbBuf, PDWORD pcbNeeded);

These decorations are very common in Win32 development, and are straightforward enough to understand. More information can be found in Unixwiz.net Tech Tip: Using Win32 calling conventions

Where it gets somewhat more tricky is when the calling convention must be incorporated into a pointer (including via a typedef), because the tag doesn't seem to fit into the normal scheme of things. These are often used (for instance) when dealing with the LoadLibrary() and GetProcAddress() API calls to call a function from a freshly-loaded DLL.

We commonly see this with typedefs:

typedef BOOL (__stdcall *PFNDRVQUERYDRIVERINFO)(
    DWORD   dwMode,
    PVOID   pBuffer,
    DWORD   cbBuf,
    PDWORD  pcbNeeded
    );

...

/* get the function address from the DLL */
pfnDrvQueryDriverInfo = (PFNDRVRQUERYDRIVERINFO)
	GetProcAddress(hDll, "DrvQueryDriverInfo")

The calling convention is an attribute of the function, not the pointer, so in the usual reading puts it after the pointer but inside the grouping parenthesis:

BOOL ( __stdcall *foo)(...);

is read as:

foo is a pointer 
to a __stdcall function 
returning BOOL.

 

source url:http://www.unixwiz.net/techtips/reading-cdecl.html