配置DMDSC主备（asm）

主备配置共享磁盘

 主库：

添加磁盘→scsi→创建新虚拟磁盘→ →高级→设备节点1:1
添加→scsi→使用现有虚拟磁盘→选中回车→高级→设备节点1:1

 修改两台主机配置文件

添加disk.locking = "false"
diskLib.dataCacheMaxSize = "0"
diskLib.dataCacheMaxReadAheadSize = "0"
diskLib.DataCacheMinReadAheadSize = "0"
diskLib.dataCachePageSize = "10240"
diskLib.maxUnsyncedWrites = "0"
scsi1:0.deviceType = "disk"
scsi1:1.deviceType = "disk"
scsi1:2.deviceType = "disk"
scsi1:3.deviceType = "disk"
scsi1.sharedBus = "VIRTUAL"

 磁盘划分分区

fdisk→n→p→+100M
fdisk→n→p→+100M
fdisk→n→p→+2048M
fdisk→n→p→回车

 编辑/etc/udev/rules.d/60-raw.rules 文件,设置裸设备绑定 （俩库）

ACTION=="add", KERNEL=="sdb1", RUN+="/bin/raw /dev/raw/raw1 %N"
ACTION=="add", KERNEL=="sdb2", RUN+="/bin/raw /dev/raw/raw2 %N"
ACTION=="add", KERNEL=="sdb3", RUN+="/bin/raw /dev/raw/raw3 %N”
ACTION=="add", KERNEL=="sdb4", RUN+="/bin/raw /dev/raw/raw4 %N"
ACTION=="add", KERNEL=="raw[1-4]", OWNER="root", GROUP="root", MODE="660"

udevadm trigger --action=add 完成裸设备绑定
partprobe /dev/sdb 刷新分区
blockdev --getsize64 /dev/raw/raw1 查看raw1裸设备大小
chown -R dmdba:dinstall /dev/raw/*

编辑dmdcr_cfg.ini配置单（安装dm未初始化）（主库）

cd /dm/data/
vim dmdcr_cfg.ini

DCR_N_GRP = 3     ##group组数量
DCR_VTD_PATH = /dev/raw/raw2   ##voting disk路径
DCR_OGUID = 63635   
[GRP]
DCR_GRP_TYPE = CSS   ##组类型（集群同步）
DCR_GRP_NAME = GRP_CSS   ##组名
DCR_GRP_N_EP = 2   ##组内节点数
DCR_GRP_DSKCHK_CNT = 60  ##磁盘心跳机制，容错时间
[GRP_CSS]
DCR_EP_NAME = CSS0   ##节点名
DCR_EP_HOST = 192.168.100.10  ##节点ip
DCR_EP_PORT = 9341   ##节点tcp监听端口
[GRP_CSS]
DCR_EP_NAME = CSS1  
DCR_EP_HOST = 192.168.100.11
DCR_EP_PORT = 9343
[GRP]
DCR_GRP_TYPE = ASM ##分布式文件系统
DCR_GRP_NAME = GRP_ASM
DCR_GRP_N_EP = 2
DCR_GRP_DSKCHK_CNT = 60
[GRP_ASM]
DCR_EP_NAME = ASM0
DCR_EP_SHM_KEY = 93360   ##共享内存标识，数值类型
DCR_EP_SHM_SIZE = 10     ##共享内存大小
DCR_EP_HOST = 192.168.100.10 
DCR_EP_PORT = 9349
DCR_EP_ASM_LOAD_PATH = /dev/raw  ##asm磁盘扫描路径
[GRP_ASM]
DCR_EP_NAME = ASM1
DCR_EP_SHM_KEY = 93361
DCR_EP_SHM_SIZE = 10
DCR_EP_HOST = 192.168.100.11
DCR_EP_PORT = 9351
DCR_EP_ASM_LOAD_PATH = /dev/raw
[GRP]
DCR_GRP_TYPE = DB  ##共享存储集群
DCR_GRP_NAME = GRP_DSC
DCR_GRP_N_EP = 2
DCR_GRP_DSKCHK_CNT = 60
[GRP_DSC]
DCR_EP_NAME = DSC0
DCR_EP_SEQNO = 0
DCR_EP_PORT = 5236
DCR_CHECK_PORT = 9741
[GRP_DSC]
DCR_EP_NAME = DSC1
DCR_EP_SEQNO = 1
DCR_EP_PORT = 5236
DCR_CHECK_PORT = 9742

DMASMCMD 工具初始化

cd /dm/bin
./dmasmcmd

ASM>create dcrdisk '/dev/raw/raw1' 'dcr'
ASM>create votedisk '/dev/raw/raw2' 'vote'
ASM>create asmdisk '/dev/raw/raw3' 'LOG0'
ASM>create asmdisk '/dev/raw/raw4' 'DATA0'
ASM>init dcrdisk '/dev/raw/raw1' from '/dm/data/dmdcr_cfg.ini'identified by 'abcd'
ASM>init votedisk '/dev/raw/raw2' from '/dm/data/dmdcr_cfg.ini'
ASM>exit

配置DMASM的MAL配置文件dmasvrmal.ini(俩节点一致)

[MAL_INST1]
 MAL_INST_NAME = ASM0
 MAL_HOST = 192.168.100.10
 MAL_PORT = 7236
[MAL_INST2]
 MAL_INST_NAME = ASM1
 MAL_HOST = 192.168.100.11
 MAL_PORT = 7237

scp dmasvrmal.ini dmdba@192.168.100.11:/dm/data/

俩节点分别配置dmdcr.ini（俩配置一致，序号不一致）

DMDCR_PATH = /dev/raw/raw1  ##dcr磁盘路径
DMDCR_MAL_PATH =/dm/data/dmasvrmal.ini #dmasmsvr 使用的MAL配置文件路径  
DMDCR_SEQNO = 0  ##当前节点序号
#ASM 重启参数，命令行方式启动
DMDCR_ASM_RESTART_INTERVAL = 0   ##1自动拉起dmcss，0不会执行
DMDCR_ASM_STARTUP_CMD = /dm/bin/dmasmsvr   dcr_ini=/dm/data/dmdcr.ini
#DB 重启参数，命令行方式启动
DMDCR_DB_RESTART_INTERVAL = 0  ##1自动拉起dmcss，0不会执行
DMDCR_DB_STARTUP_CMD = /dm/bin/dmserver path=/dm/data/dsc0_config/dm.ini dcr_ini=/dm/data/dmdcr.ini
##标黄位置必须为一行

---

DMDCR_PATH = /dev/raw/raw1
DMDCR_MAL_PATH =/dm/data/dmasvrmal.ini #dmasmsvr 使用的 MAL 配置文件路径  
DMDCR_SEQNO = 1
#ASM 重启参数，命令行方式启动
DMDCR_ASM_RESTART_INTERVAL = 0
DMDCR_ASM_STARTUP_CMD = /dm/bin/dmasmsvr dcr_ini=/dm/data/dmdcr.ini
#DB 重启参数，命令行方式启动
DMDCR_DB_RESTART_INTERVAL = 0
DMDCR_DB_STARTUP_CMD = /dm/bin/dmserver path=/dm/data/dsc1_config/dm.ini dcr_ini=/dm/data/dmdcr.ini

手动启动dmcss集群同步服务（俩库前台启动）

./dmcss dcr_ini=/dm/data/dmdcr.ini

手动启动dmasm共享存储服务（俩库前台启动）

./dmasmsvr DCR_INI=/dm/data/dmdcr.ini

任意节点启动dmasmtool工具创建磁盘组

    ./dmasmtool DCR_INI=/dm/data/dmdcr.ini
DMASMTOOL V8
ASM>create diskgroup 'DMLOG' asmdisk '/dev/raw/raw3'
Used time: 51.873(ms).
ASM>create diskgroup 'DMDATA' asmdisk '/dev/raw/raw4'
Used time: 25.637(ms).
ASM>exit    

编辑dminit.ini 配置文件

db_name = dsc
system_path = +DMDATA/data
system = +DMDATA/data/dsc/system.dbf
system_size = 128
roll = +DMDATA/data/dsc/roll.dbf
roll_size = 128
main = +DMDATA/data/dsc/main.dbf
main_size = 128
ctl_path = +DMDATA/data/dsc/dm.ctl
ctl_size = 8
log_size = 256
dcr_path = /dev/raw/raw1 #dcr 磁盘路径，目前不支持 asm，只能是裸设备
dcr_seqno = 0
auto_overwrite = 1
[DSC0] #inst_name 跟 dmdcr_cfg.ini 中 DB 类型 group 中 DCR_EP_NAME 对应
config_path = /dm/data/dsc0_config
port_num = 5236
mal_host = 192.168.100.10
mal_port = 9340
log_path = +DMLOG/log/dsc0_log01.log
log_path = +DMLOG/log/dsc0_log02.log
[DSC1] #inst_name 跟 dmdcr_cfg.ini 中 DB 类型 group 中 DCR_EP_NAME 对应
config_path = /dm/data/dsc1_config
port_num = 5237
mal_host = 192.168.100.11
mal_port = 9341
log_path = +DMLOG/log/dsc1_log01.log
log_path = +DMLOG/log/dsc1_log02.log

指定环境初始化

cd /dm/bin
./dminit control=/dm/data/dminit.ini

启动俩库实例数据库

scp -r /dm/data/dsc1_config dmdba@192.168.100.11:/dm/data/
./dmserver /dm/data/dsc0_config/dm.ini dcr_ini=/dm/data/dmdcr.ini
./dmserver /dm/data/dsc1_config/dm.ini dcr_ini=/dm/data/dmd