H3C 交换机基础命令

一、更换交换机系统版本

1. 升级启动软件

# 将IPE文件指定为主用启动软件。

<Sysname> boot-loader file flash:/all.ipe all main

Verifying the file flash:/all.ipe on slot 1..............Done.

H3C S10510 images in IPE:

  boot.bin

  system.bin

This command will set the main startup software images. Continue? [Y/N]:y

# 将IPE文件指定为备用启动软件。

<Sysname> boot-loader file flash:/all2.ipe all backup

Verifying the file flash:/all2.ipe on slot 1..............Done.

H3C S10510 images in IPE:

  boot.bin

  system.bin

This command will set the backup startup software images. Continue? [Y/N]:y

2. 重启设备

重启设备，完成启动软件的升级。

<Sysname> reboot

Start to check configuration with next startup configuration file, please wait.

........DONE!

This command will reboot the device. Continue? [Y/N]:y

Now rebooting, please wait...