Ubuntu19配置静态IP的坑点

最新推荐文章于 2024-07-31 23:34:51 发布

K放假

最新推荐文章于 2024-07-31 23:34:51 发布

阅读量5k

点赞数

分类专栏： Ubuntu19 文章标签： Ubuntu19 静态IP unkonw ens33 网卡选择正确的情况下仍旧提示失败

本文链接：https://blog.csdn.net/u010149713/article/details/90758429

版权

Ubuntu19 专栏收录该内容

1 篇文章 0 订阅

订阅专栏

#铭记一下Ubuntu19配置静态IP的坑点
#按照惯例，先查看本机网卡
kay@ubuntu:~$ ifconfig
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.101.141  netmask 255.255.255.0  broadcast 192.168.101.255
        inet6 fe80::5648:35e6:65e2:eb64  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:35:24:6d  txqueuelen 1000  (Ethernet)
        RX packets 164  bytes 23398 (23.3 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 191  bytes 21066 (21.0 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 203  bytes 17079 (17.0 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 203  bytes 17079 (17.0 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

#可以看到本机网卡为ens33
#接下来去设置静态IP
kay@ubuntu:~$ vim /etc/network/interfaces
auto lo
iface lo inet loopback
auto ens33
iface ens33 inet static
address 192.168.101.141
netmask 255.255.255.0
gateway 192.168.101.2
nameserver 223.5.5.5
nameserver 180.76.76.76

#保存(:wq)之后，重启网络配置service networking restart
kay@ubuntu:~$ service networking restart
Job for networking.service failed because the control process exited with error code.
See "systemctl status networking.service" and "journalctl -xe" for details.
#坑点来了！！！所有设置都对的情况下，重启网络服务失败！！！
#原因在于Ubuntu19配置网络规定了格式！！！正确的配置格式如下
auto lo
iface lo inet loopback

iface ens33 inet static
	address 192.168.101.141
	netmask 255.255.255.0
	gateway 192.168.101.2
	nameserver 223.5.5.5
	nameserver 180.76.76.76