hid例程

USBD_Class_cb_TypeDef  USBD_HID_cb = 
{
  USBD_HID_Init,
  USBD_HID_DeInit,
  USBD_HID_Setup,
  NULL, /*EP0_TxSent*/  
  NULL, /*EP0_RxReady*/
  USBD_HID_DataIn, /*DataIn*/
  //NULL, /*DataOut*/
  USBD_HID_DataOut,
  NULL, /*SOF */
  NULL,
  NULL,      
  USBD_HID_GetCfgDesc,
#ifdef USB_OTG_HS_CORE  
  USBD_HID_GetCfgDesc, /* use same config as per FS */
#endif  
};


static uint8_t  USBD_HID_DataOut (void *pdev, uint8_t epnum)
{      
  uint16_t USB_Rx_Cnt;
  uint8_t data[4]={0x11,0x22,0x33,0x44};
  /* Get the received data buffer and update the counter */
  USB_Rx_Cnt = ((USB_OTG_CORE_HANDLE*)pdev)->dev.out_ep[epnum].xfer_count;
   GPIO_ResetBits(GPIOE, GPIO_Pin_1);
  /* USB data will be immediately processed, this allow next USB traffic being 
     NAKed till the end of the application Xfer */
  //APP_FOPS.pIf_DataRx(USB_Rx_Buffer, USB_Rx_Cnt);
  DCD_EP_Tx ( pdev,HID_IN_EP,data,4);
  /* Prepare Out endpoint to receive next packet */
  DCD_EP_PrepareRx(pdev,
                   HID_OUT_EP,
                   (uint8_t*)(USB_Rx_Buffer),
                   HID_OUT_PACKET);

  return USBD_OK;
}

配置描述符
__ALIGN_BEGIN static uint8_t USBD_HID_CfgDesc[USB_HID_CONFIG_DESC_SIZ] __ALIGN_END =//[USB_HID_CONFIG_DESC_SIZ] __ALIGN_END =
{ 

  #if 1

0x09, /* bLength: Configuation Descriptor size */

    USB_CONFIGURATION_DESCRIPTOR_TYPE, /* bDescriptorType: Configuration */

    USB_HID_CONFIG_DESC_SIZ,

    /* wTotalLength: Bytes returned */

    0x00,

     0x01,   // 0x01,         /* bNumInterfaces: 1 interface */

    0x01,         /* bConfigurationValue: Configuration value */

    0x00,         /* iConfiguration: Index of string descriptor describing

                                 the configuration*/

    0xC0,         /* bmAttributes: Bus powered */

                  /*Bus powered: 7th bit, Self Powered: 6th bit, Remote wakeup: 5th bit, reserved: 4..0 bits */

    0x32,         /* MaxPower 100 mA: this current is used for detecting Vbus */

//    0x96,         /* MaxPower 300 mA: this current is used for detecting Vbus */

    /************** Descriptor of Custom HID interface ****************/

    /* 09 */

    0x09,         /* bLength: Interface Descriptor size */

    USB_INTERFACE_DESCRIPTOR_TYPE,/* bDescriptorType: Interface descriptor type */

    0x00,         /* bInterfaceNumber: Number of Interface */

    0x00,         /* bAlternateSetting: Alternate setting */

   0x02,         /* bNumEndpoints */
    
     
    0x03,         /* bInterfaceClass: HID */

    0x00,         /* bInterfaceSubClass : 1=BOOT, 0=no boot */

    0x00,         /* nInterfaceProtocol : 0=none, 1=keyboard, 2=mouse */

    0,            /* iInterface: Index of string descriptor */

    /******************** Descriptor of Custom HID HID ********************/

    /* 18 */

    0x09,         /* bLength: HID Descriptor size */

    HID_DESCRIPTOR_TYPE, /* bDescriptorType: HID */

    0x10,         /* bcdHID: HID Class Spec release number */

    0x01,

    0x00,         /* bCountryCode: Hardware target country */

    0x01,         /* bNumDescriptors: Number of HID class descriptors to follow */

    0x22,         /* bDescriptorType */

    CUSTOMHID_SIZ_REPORT_DESC,/* wItemLength: Total length of Report descriptor */

    0x00,

    /******************** Descriptor of Custom HID endpoints ******************/

    /* 27 */

    0x07,          /* bLength: Endpoint Descriptor size */

    USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType: */



    HID_IN_EP,          /* bEndpointAddress: Endpoint Address (IN) */               

                   // bit 3...0 : the endpoint number

                   // bit 6...4 : reserved

                    // bit 7     : 0(OUT), 1(IN)

    0x03,          /* bmAttributes: Interrupt endpoint */

    0x40,//0x02,          /* wMaxPacketSize: 20 Bytes max */

    0x00,

   // 0x10,          /* bInterval: Polling Interval (32 ms) */

    0xa,      /* bInterval: Polling Interval (10ms) */
    /* 34 */

           

    0x07,      /* bLength: Endpoint Descriptor size */

    USB_ENDPOINT_DESCRIPTOR_TYPE,   /* bDescriptorType: */

                     /*    Endpoint descriptor type */

    HID_OUT_EP,      /* bEndpointAddress: */

                     /*    Endpoint Address (OUT) */

    0x03,      /* bmAttributes: Interrupt endpoint */

    0x40,//0x02,   /* wMaxPacketSize: 20 Bytes max  */

    0x00,

    0x10,      /* bInterval: Polling Interval (16 ms) */

    /* 41 */

#endif
    


} ;

#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
  #if defined ( __ICCARM__ ) /*!< IAR Compiler */
    #pragma data_alignment=4   
  #endif
/* USB HID device Configuration Descriptor */
__ALIGN_BEGIN static uint8_t USBD_HID_Desc[USB_HID_DESC_SIZ] __ALIGN_END=
{
  /* 18 */
  0x09,         /*bLength: HID Descriptor size*/
  HID_DESCRIPTOR_TYPE, /*bDescriptorType: HID*/
  0x11,         /*bcdHID: HID Class Spec release number*/
  0x01,
  0x00,         /*bCountryCode: Hardware target country*/
  0x01,         /*bNumDescriptors: Number of HID class descriptors to follow*/
  0x22,         /*bDescriptorType*/
  HID_MOUSE_REPORT_DESC_SIZE,/*wItemLength: Total length of Report descriptor*/
  0x00,
};
#endif 


#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
  #if defined ( __ICCARM__ ) /*!< IAR Compiler */
    #pragma data_alignment=4   
  #endif
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */  

__ALIGN_BEGIN static uint8_t HID_MOUSE_ReportDesc[HID_MOUSE_REPORT_DESC_SIZE] __ALIGN_END =
{ 
  #if 1
  0x05, 0x8c, /* USAGE_PAGE (ST Page) */ 
0x09, 0x01, /* USAGE (Demo Kit) */ 
0xa1, 0x01, /* COLLECTION (Application) */ 
/* 6 */ 

// The Input report 
0x09,0x03, // USAGE ID - Vendor defined 
0x15,0x00, // LOGICAL_MINIMUM (0) 
0x26,0x00, 0xFF, // LOGICAL_MAXIMUM (255) 
0x75,0x08, // REPORT_SIZE (8) 
//0x95,0x16, // REPORT_COUNT (20) 
0x95,0x40,
0x81,0x02, // INPUT (Data,Var,Abs) 
//19
// The Output report 
0x09,0x04, // USAGE ID - Vendor defined 
0x15,0x00, // LOGICAL_MINIMUM (0) 
0x26,0x00,0xFF, // LOGICAL_MAXIMUM (255) 
0x75,0x08, // REPORT_SIZE (8) 
//0x95,0x16, // REPORT_COUNT (20) 
0x95,0x40, // REPORT_COUNT (64) 
0x91,0x02, // OUTPUT (Data,Var,Abs) 
//32
// The Feature report
/*
0x09, 0x05, // USAGE ID - Vendor defined 
0x15,0x00, // LOGICAL_MINIMUM (0) 
0x26,0x00,0xFF, // LOGICAL_MAXIMUM (255) 
0x75,0x08, // REPORT_SIZE (8) 
0x95,0x02, // REPORT_COUNT (2) 
0xB1,0x02, 
*/
/* 45 */ 
0xc0 /* END_COLLECTION */ 
#endif 
};