云课堂作业第二章

最新推荐文章于 2023-03-16 23:23:32 发布

刘尔泽

最新推荐文章于 2023-03-16 23:23:32 发布

阅读量600

点赞数

分类专栏：灰色空间文章标签：内核

灰色空间专栏收录该内容

10 篇文章 0 订阅

订阅专栏

云课堂作业第二章刘玉龙真实姓名 + 原创作品转载请注明出处 + 《Linux内核分析》MOOC课程http://mooc.study.163.com/course/USTC-1000029000 ”

总结：操作系统的核心功能就是：进程调度和中断机制，通过与硬件的配合实现多任务处理，再加上上层应用软件的支持，最终变成可以使用户可以很容易操作的计算机系统，我发现大学目前的上的那个操作系统啊，计算机组成原理什么的还是要学的，学完理解起来应该能快点。

源码部分

mypcb.h

#define MAX_TASK_NUM        4
#define KERNEL_STACK_SIZE   1024*8

/* CPU-specific state of this task */
struct Thread {
    unsigned long		ip;
    unsigned long		sp;
};

typedef struct PCB{
    int pid;
    volatile long state;	/* -1 unrunnable, 0 runnable, >0 stopped */
    char stack[KERNEL_STACK_SIZE];
    /* CPU-specific state of this task */
    struct Thread thread;
    unsigned long	task_entry;
    struct PCB *next;
}tPCB;

void my_schedule(void);

mymain.c

#include <linux/types.h>
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/tty.h>
#include <linux/vmalloc.h>


#include "mypcb.h"

tPCB task[MAX_TASK_NUM];
tPCB * my_current_task = NULL;
volatile int my_need_sched = 0;

void my_process(void);


void __init my_start_kernel(void)
{
    int pid = 0;
    int i;
    /* Initialize process 0*/
    task[pid].pid = pid;
    task[pid].state = 0;/* -1 unrunnable, 0 runnable, >0 stopped */
    task[pid].task_entry = task[pid].thread.ip = (unsigned long)my_process;
    task[pid].thread.sp = (unsigned long)&task[pid].stack[KERNEL_STACK_SIZE-1];
    task[pid].next = &task[pid];
    /*fork more process */
    for(i=1;i<MAX_TASK_NUM;i++)
    {
        memcpy(&task[i],&task[0],sizeof(tPCB));
        task[i].pid = i;
        task[i].state = -1;
        task[i].thread.sp = (unsigned long)&task[i].stack[KERNEL_STACK_SIZE-1];
        task[i].next = task[i-1].next;
        task[i-1].next = &task[i];
    }
    /* start process 0 by task[0] */
    pid = 0;
    my_current_task = &task[pid];
	asm volatile(
    	"movl %1,%%esp\n\t" 	/* set task[pid].thread.sp to esp */
    	"pushl %1\n\t" 	        /* push ebp */
    	"pushl %0\n\t" 	        /* push task[pid].thread.ip */
    	"ret\n\t" 	            /* pop task[pid].thread.ip to eip */
    	"popl %%ebp\n\t"
    	: 
    	: "c" (task[pid].thread.ip),"d" (task[pid].thread.sp)	/* input c or d mean %ecx/%edx*/
	);
}   
void my_process(void)
{
    int i = 0;
    while(1)
    {
        i++;
        if(i%10000000 == 0)
        {
            printk(KERN_NOTICE "this is process %d -\n",my_current_task->pid);
            if(my_need_sched == 1)
            {
                my_need_sched = 0;
        	    my_schedule();
        	}
        	printk(KERN_NOTICE "this is process %d +\n",my_current_task->pid);
        }     
    }
}

myinterrupt.c

#include <linux/types.h>
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/tty.h>
#include <linux/vmalloc.h>

#include "mypcb.h"

extern tPCB task[MAX_TASK_NUM];
extern tPCB * my_current_task;
extern volatile int my_need_sched;
volatile int time_count = 0;

/*
 * Called by timer interrupt.
 * it runs in the name of current running process,
 * so it use kernel stack of current running process
 */
void my_timer_handler(void)
{
#if 1
    if(time_count%1000 == 0 && my_need_sched != 1)
    {
        printk(KERN_NOTICE ">>>my_timer_handler here<<<\n");
        my_need_sched = 1;
    } 
    time_count ++ ;  
#endif
    return;  	
}

void my_schedule(void)
{
    tPCB * next;
    tPCB * prev;

    if(my_current_task == NULL 
        || my_current_task->next == NULL)
    {
    	return;
    }
    printk(KERN_NOTICE ">>>my_schedule<<<\n");
    /* schedule */
    next = my_current_task->next;
    prev = my_current_task;
    if(next->state == 0)/* -1 unrunnable, 0 runnable, >0 stopped */
    {
    	/* switch to next process */
    	asm volatile(	
        	"pushl %%ebp\n\t" 	    /* save ebp */
        	"movl %%esp,%0\n\t" 	/* save esp */
        	"movl %2,%%esp\n\t"     /* restore  esp */
        	"movl $1f,%1\n\t"       /* save eip */	
        	"pushl %3\n\t" 
        	"ret\n\t" 	            /* restore  eip */
        	"1:\t"                  /* next process start here */
        	"popl %%ebp\n\t"
        	: "=m" (prev->thread.sp),"=m" (prev->thread.ip)
        	: "m" (next->thread.sp),"m" (next->thread.ip)
    	); 
    	my_current_task = next; 
    	printk(KERN_NOTICE ">>>switch %d to %d<<<\n",prev->pid,next->pid);   	
    }
    else
    {
        next->state = 0;
        my_current_task = next;
        printk(KERN_NOTICE ">>>switch %d to %d<<<\n",prev->pid,next->pid);
    	/* switch to new process */
    	asm volatile(	
        	"pushl %%ebp\n\t" 	    /* save ebp */
        	"movl %%esp,%0\n\t" 	/* save esp */
        	"movl %2,%%esp\n\t"     /* restore  esp */
        	"movl %2,%%ebp\n\t"     /* restore  ebp */
        	"movl $1f,%1\n\t"       /* save eip */	
        	"pushl %3\n\t" 
        	"ret\n\t" 	            /* restore  eip */
        	: "=m" (prev->thread.sp),"=m" (prev->thread.ip)
        	: "m" (next->thread.sp),"m" (next->thread.ip)
    	);          
    }   
    return;	
}

my_timer_handler 函数会被内核周期性的调用，每调用1000次，就去将全局变量my_need_sched的值修改为1，通知正在执行的进程执行调度程序my_schedule。在my_schedule函数中，完成进程的切换。进程的切换分两种情况，一种情况是下一个进程没有被调度过，另外一种情况是下一个进程被调度过，可以通过下一个进程的state知道其状态。进程切换依然是通过内联汇编代码实现，无非是保存旧进程的eip和堆栈，将新进程的eip和堆栈的值存入对应的寄存器中。原来那个mypcb.h定义了 Thread 结构体，用于存储当前进程中正在执行的线程的ip和sp，PCB结构体中的各个字段含义如下

pid：进程号

state：进程状态，在模拟系统中，所有进程控制块信息都会被创建出来，其初始化值就是-1，如果被调度运行起来，其值就会变成0

stack：进程使用的堆栈

thread：当前正在执行的线程信息

task_entry：进程入口函数

next：指向下一个PCB，模拟系统中所有的PCB是以链表的形式组织起来的。

主要的数一下核心代码

首先，解读一下程序的核心代码

void __init my_start_kernel(void)
{
int i = 0;
while(1)
{
i++;
if(i%100000 == 0)
printk(KERN_NOTICE "my_start_kernel here %d ",i);

}
}

这是内核代码的启动函数，C语言编写，循环部分是每执行100000次，输出一条语句。

void my_timer_handler(void)
{
printk(KERN_NOTICE " >>>>>>>>6666>>>>>>>>>my_timer_handler here<<<<<<<<<<<<<<<<<< ");
}

这段代码是被时间中断时调用，每次被调用的时候输出一条语句。