数码管

#include <reg52.h>
#define DataPort P0 //定义数据端口
sbit LATCH_Seg = P2^2;//定义锁存使能端口，段锁存
sbit LATCH_Bit = P2^3;//                  位
unsigned char DuanMa[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71};
unsigned char WeiMa[] ={0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f};
unsigned char sec;
//unsigned char i;

void delay(unsigned int t);

void ISR_T0(void);
/*void Delay_1s()//50*20
{
    int t;
    TMOD = 0x01;
    for(t=0;t<20;t++)
    {
        TH0 = 0x3c;//高位
        TL0 = 0xb0;//低位
        TR0 = 1;//开关
        while(!TF0);//标志位（溢出）
        TF0 = 0;
    }
}*/
void timer_init()
{
     TH0 = 0x3c;//高位
     TL0 = 0xb0;//低位
}
void main(void)
{
   int i;
//	int num;
	TMOD = 0x01;
	Timer_init();
        TR0 = 1;//开关
        //while(!TF0);//标志位（溢出）
        //TF0 = 0;
//	num = 0;
	EA = 1;//总开关
	ET0 = 1;//外部中断开