gec210LED驱动

GEC210 有四个led灯，查看原理图发现控制led的gpio为 gpj2；所以我只要配置gpj2就可以达到控制led的效果

led字符设备中实现的函数有，led_open(),led_close(),led_release(),led_ioctl();这些函数直接赋值给struct file——operations 结构中对应的成员变量，并且注册struct file_operations结构，当使用者打开设备的时候，调用led_open()函数，关闭设备的时候，调用led_close(),函数，操作led状态，直接传参数给led_ioctl();

file_operations 结构：

static struct file_operations GEC210_led_fops =
{
     	.owner   =   THIS_MODULE,
     	.open    =   GEC210_led_open, 
     	.release =   GEC210_led_release,
	.ioctl   =   GEC210_led_ioctl,
	.write   =   GEC210_led_write,
	.read    =   GEC210_led_read,
};

led_open()函数

static int GEC210_led_open(struct inode *inode, struct file *file)
{
	/* 初始化LED引脚*/
	unsigned  int val;
	val=readl(rGPJ2CON);
	val&=~(0xffff<<0);
	writel(val,rGPJ2CON);
	val=readl(rGPJ2DAT);
	val|=(1111<<0);
	writel(val,rGPJ2DAT);
}

完整源码  http://download.csdn.net/detail/u012090772/6552379