一、线程
线程是程序最小的单元
#!/usr/bin/env python
# -*- coding:utf-8 -*-
import threading
import time
def show(arg):
time.sleep(1)
print 'thread'+str(arg)
for i in range(10):
t = threading.Thread(target=show, args=(i,))
t.start()
print 'main thread stop'
更多方法:
- start 线程准备就绪,等待CPU调度
- setName 为线程设置名称
- getName 获取线程名称
- setDaemon 设置为后台线程或前台线程(默认)
如果是后台线程,主线程执行过程中,后台线程也在进行,主线程执行完毕后,后台线程不论成功与否,均停止
如果是前台线程,主线程执行过程中,前台线程也在进行,主线程执行完毕后,等待前台线程也执行完成后,程序停止 - join 逐个执行每个线程,执行完毕后继续往下执行,该方法使得多线程变得无意义
- run 线程被cpu调度后自动执行线程对象的run方法
下面自定义一个线程
import threading
import time
class MyThread(threading.Thread):
def __init__(self,num):
threading.Thread.__init__(self)
self.num = num
def run(self):#定义每个线程要运行的函数
print("running on number:%s" %self.num)
time.sleep(3)
if __name__ == '__main__':
t1 = MyThread(1)
t2 = MyThread(2)
t1.start()
t2.start()
线程锁(Lock,RLock)
由于线程之间是进行随机调度,并且每个线程可能只执行n条执行之后,当多个线程同时修改同一条数据时可能会出现脏数据,所以,出现了线程锁 - 同一时刻允许一个线程执行操作。
#!/usr/bin/env python
#coding:utf-8
import threading
import time
gl_num = 0
lock = threading.RLock()
def Func():
lock.acquire()
global gl_num
gl_num +=1
time.sleep(1)
print gl_num
lock.release()
for i in range(10):
t = threading.Thread(target=Func)
t.start()
信号量(Semaphore)
互斥锁 同时只允许一个线程更改数据,而Semaphore是同时允许一定数量的线程更改数据 ,比如厕所有3个坑,那最多只允许3个人上厕所,后面的人只能等里面有人出来了才能再进去。
import threading,time
def run(n):
semaphore.acquire()
time.sleep(1)
print("run the thread: %s" %n)
semaphore.release()
if __name__ == '__main__':
num= 0
semaphore = threading.BoundedSemaphore(5) #最多允许5个线程同时运行
for i in range(20):
t = threading.Thread(target=run,args=(i,))
t.start()
事件(event)
python线程的事件用于主线程控制其他线程的执行,事件主要提供了三个方法 set、wait、clear。
事件处理的机制:全局定义了一个“Flag”,如果“Flag”值为 False,那么当程序执行 event.wait 方法时就会阻塞,如果“Flag”值为True,那么event.wait 方法时便不再阻塞。
- clear:将“Flag”设置为False
- set:将“Flag”设置为True
#!/usr/bin/env python
# -*- coding:utf-8 -*-
import threading
def do(event):
print 'start'
event.wait()
print 'execute'
event_obj = threading.Event()
for i in range(10):
t = threading.Thread(target=do, args=(event_obj,))
t.start()
event_obj.clear()
inp = raw_input('input:')
if inp == 'true':
event_obj.set()
条件(Condition)
使得线程等待,只有满足某条件时,才释放n个线程
import threading
def run(n):
con.acquire()
con.wait()
print("run the thread: %s" %n)
con.release()
if __name__ == '__main__':
con = threading.Condition()
for i in range(10):
t = threading.Thread(target=run, args=(i,))
t.start()
while True:
inp = input('>>>')
if inp == 'q':
break
con.acquire()
con.notify(int(inp))
con.release()
二、进程(注意:由于进程之间的数据需要各自持有一份,所以创建进程需要的非常大的开销。)
小例子:
from multiprocessing import Process
import threading
import time
def foo(i):
print 'say hi',i
for i in range(10):
p = Process(target=foo,args=(i,))
p.start()
进程间默认无法进行数据共享的,若想数据共享,下面的方法:
#方法一,Array
from multiprocessing import Process,Array
temp = Array('i', [11,22,33,44])
def Foo(i):
temp[i] = 100+i
for item in temp:
print i,'----->',item
for i in range(2):
p = Process(target=Foo,args=(i,))
p.start()
#方法二:manage.dict()共享数据
from multiprocessing import Process,Manager
manage = Manager()
dic = manage.dict()
def Foo(i):
dic[i] = 100+i
print dic.values()
for i in range(2):
p = Process(target=Foo,args=(i,))
p.start()
p.join()
Array类型对应表
'c': ctypes.c_char, 'u': ctypes.c_wchar,
'b': ctypes.c_byte, 'B': ctypes.c_ubyte,
'h': ctypes.c_short, 'H': ctypes.c_ushort,
'i': ctypes.c_int, 'I': ctypes.c_uint,
'l': ctypes.c_long, 'L': ctypes.c_ulong,
'f': ctypes.c_float, 'd': ctypes.c_double
from multiprocessing import Process, Queue
def f(i,q):
print(i,q.get())
if __name__ == '__main__':
q = Queue()
q.put("h1")
q.put("h2")
q.put("h3")
for i in range(10):
p = Process(target=f, args=(i,q,))
p.start()
当进程创建时(未使用),就已经拿到了共享数据,那么现在想当进程执行完,再赋值给原值
进程锁实例:
#!/usr/bin/env python
# -*- coding:utf-8 -*-
from multiprocessing import Process, Array, RLock
def Foo(lock,temp,i):
"""
将第0个数加100
"""
lock.acquire()
temp[0] = 100+i
for item in temp:
print i,'----->',item
lock.release()
lock = RLock()
temp = Array('i', [11, 22, 33, 44])
for i in range(20):
p = Process(target=Foo,args=(lock,temp,i,))
p.start()
进程池
进程池内部维护一个进程序列,当使用时,则去进程池中获取一个进程,如果进程池序列中没有可供使用的进进程,那么程序就会等待,直到进程池中有可用进程为止。
进程池中有两个方法:
- apply
- apply_async
#!/usr/bin/env python
# -*- coding:utf-8 -*-
from multiprocessing import Process,Pool
import time
def Foo(i):
time.sleep(2)
return i+100
def Bar(arg):
print arg
pool = Pool(5)
#print pool.apply(Foo,(1,))
#print pool.apply_async(func =Foo, args=(1,)).get()
for i in range(10):
pool.apply_async(func=Foo, args=(i,),callback=Bar)
print 'end'
pool.close()
pool.join()#进程池中进程执行完毕后再关闭,如果注释,那么程序直接关闭。
三、协程
线程和进程的操作是由程序触发系统接口,最后的执行者是系统;协程的操作则是程序员。
协程存在的意义:对于多线程应用,CPU通过切片的方式来切换线程间的执行,线程切换时需要耗时(保存状态,下次继续)。协程,则只使用一个线程,在一个线程中规定某个代码块执行顺序。
协程的适用场景:当程序中存在大量不需要CPU的操作时(IO),适用于协程;
greenlet
#!/usr/bin/env python
# -*- coding:utf-8 -*-
from greenlet import greenlet
def test1():
print 12
gr2.switch()
print 34
gr2.switch()
def test2():
print 56
gr1.switch()
print 78
gr1 = greenlet(test1)
gr2 = greenlet(test2)
gr1.switch()
gevent
import gevent
def foo():
print('Running in foo')
gevent.sleep(0)
print('Explicit context switch to foo again')
def bar():
print('Explicit context to bar')
gevent.sleep(0)
print('Implicit context switch back to bar')
gevent.joinall([
gevent.spawn(foo),
gevent.spawn(bar),
])
遇到IO操作自动切换:
from gevent import monkey; monkey.patch_all()
import gevent
import urllib2
def f(url):
print('GET: %s' % url)
resp = urllib2.urlopen(url)
data = resp.read()
print('%d bytes received from %s.' % (len(data), url))
gevent.joinall([
gevent.spawn(f, 'https://www.python.org/'),
gevent.spawn(f, 'https://www.yahoo.com/'),
gevent.spawn(f, 'https://github.com/'),
])