AXI/AHB/APB:How to disable AMBA VIP SV/UVM messages 以及将C家VIP的报错信息降级的方法：

Philps.Fan

已于 2023-05-12 10:12:21 修改

阅读量703

点赞数 1

文章标签： fpga开发

于 2023-04-20 19:58:24 首次发布

本文链接：https://blog.csdn.net/u012521321/article/details/129733493

版权

1.如何关掉sv/uvm打印信息，可以参考下图：

以上是配置寄存器的方式。此外，还有通过configuration的方式，如下所示：

1. axi mater vip

1.1 activeMasterCfg.verbosity = CDN_AXI_CFG_MESSAGEVERBOSITY_NONE;

1.2 activeMasterCfg.enable_tracker = 0;

2. axi slave vip

2.1 passiveSlaveCfg.verbosity = CDN_AXI_CFG_MESSAGEVERBOSITY_NONE;

2.2 passiveSlaveCfg.enable_tracker = 0;

3. ahb vip

3.1 AhbactiveSlaveCfg.verbosity = CDN_AHB_CFG_MESSAGEVERBOSITY_NONE;

3.2 AhbactiveSlaveCfg.enable_tracker = 0;

2.将C家VIP的报错信息降级的方法：

通常在env的connect_phase()里面实现：

function void xxx::connect_phase(uvm_phase phase);
    super.connect_phase(phase);
    //various ports connection
    passiveSlave.monitor.set_report_severity_id_action(UVM_FATAL,"CDN_AXI_FATAL_ERR_VR_AXI226_MEMORY_INCONSISTENCY",UVM_NO_ACTION);//USE UVM_NO_ACTION override UVM_FATAL

passiveSlave.monitor.set_report_severity_id_action(UVM_FATAL,"CDN_AXI_FATAL_ERR_VR_AXI209_RLAST_NOT_ASSERTED",UVM_ERROR);//USE UVM_ERROR override UVM_FATAL

AhbpassiveMaster.monitor.set_report_severity_id_action(UVM_FATAL,"CDN_AHB_FATAL_ERR_VR_AHB170_WRONG_STRB_VALUE",UVM_NO_ACTION);//USE UVM_NO_ACTION override UVM_FATAL

AhbpassiveMaster.monitor.set_report_severity_id_action(UVM_FATAL,"CDN_AHB_FATAL_ERR_VR_AHB111_MSTR_BAD_LATER_TR",UVM_ERROR);//USE UVM_ERROR override UVM_FATAL

endfunction