OpenHarmony-4.0-Release 源码编译记录

最新推荐文章于 2024-03-15 07:45:00 发布

cczhengv

最新推荐文章于 2024-03-15 07:45:00 发布

阅读量4.2k

点赞数 9

分类专栏： HarmonyOS 入坑文章标签： harmonyOS

本文链接：https://blog.csdn.net/u012932409/article/details/134525109

版权

HarmonyOS 入坑专栏收录该内容

1 篇文章 1 订阅

订阅专栏

本文基于 Ubuntu 20.04.4 LTS

1、环境准备

这个没啥好说的，都是搞机的，用之前编译 aosp 的 linux 环境就行，有小伙伴担心会把之前的环境搞崩，

也有用 docker 编译的，我这里就直接在 aosp 环境下搞了，还省事。

安装下面这三东西，是为了下载 Harmony 源码

sudo apt install curl
sudo apt install python3-pip
sudo apt install git-lfs

安装下面这五个东西，是为了解决编译到最后报错(头铁不信的，你可以试试，等最后再安装)

sudo apt install default-jdk
sudo apt install mtd-utils
sudo apt install scons
sudo apt install gcc-arm-none-eabi
sudo apt install gcc-arm-linux-gnueabi

2、安装 repo

务必按照此步骤安装repo。ubuntu默认提供的repo每次启动都会访问googlge服务器，会被墙。
此外20.04下需要root身份执行–否则提示没权限。
curl https://gitee.com/oschina/repo/raw/fork_flow/repo-py3 > /usr/local/bin/repo
chmod a+x /usr/local/bin/repo
pip3 install -i https://repo.huaweicloud.com/repository/pypi/simple requests

3、下载源码

[官网版本更新说明}(https://gitee.com/openharmony/docs/tree/master/zh-cn/release-notes)

目前最新为 4.0 版本，内核基于 5.10，老版本 2.x 1.x 已经停止维护，内核基于 4.19

参考官网下载方式

repo init -u https://gitee.com/openharmony/manifest -b OpenHarmony-4.0-Release --no-repo-verify
repo sync -c
repo forall -c ‘git lfs pull’

注意那个 4.0 之前没有 v，以前的版本是有这个 v 的，不然会初始化失败，还有就是注意检查电脑是否断网了

4、下载编译依赖工具包

源码下载完成后，进入根目录执行 bash build/prebuilts_download.sh

看你网速快慢，我这大概20分钟，下载完成后会多出 openharmony_prebuilts 文件夹

5、编译源码

./build.sh --product-name rk3568 --ccache

第一次编译前面阶段 2W 多个文件，后面阶段 6W 多个文件，整体时间看你电脑性能。

编译中间要是出错看提示就行，少啥就自行安装，比如这种

default-jdk is not installed. please install it.
mtd-utils is not installed. please install it.
scons is not installed. please install it.
gcc-arm-none-eabi is not installed. please install it.
gcc-arm-linux-gnueabi is not installed. please install it.
Missing dependencies, please check!
[OHOS INFO] Set cache size limit to 100.0 GB
[OHOS INFO] generated build prop info to /hom

6、烧写固件(劝你先别烧写)

最终固件路径 out\rk3568\packages\phone\images\

里面文件和普通 rk3568 aosp 项目大差不差，所以烧写方式也是一样的。

打开 rk 烧写工具，选择加载配置，选择 images 里的 config.cfg，把对应的 image

都重新选择替换就行。想要看图的可以去参考这个OpenHarmony 入门

7、内核及驱动移植

没有任何修改编译后的固件肯定是无法在板子上跑起来的，我这里修改了很长时间也没有搞定，这里记录一下一些心得。

主要原因就是内核版本差异太大，无法平行移植，有些小伙伴直接整个 kernel 替换了就成功跑起来了。

3568 有些版本的内核用的是 4.19(我这里就是),而最新的 harmony 都是基于 5.10 了

harmony 内核源码修改路径 out\kernel\src_tmp\linux-5.10

你要是内核版本一致就可以直接替换所有文件，然后稍微修改一下如下编译规则文件

out\kernel\src_tmp\linux-5.10\make-ohos.sh

替换原有 TOYBRICK_DTB 为你自己的，比如 MY3568_DTB, 总共 4 处修改

#!/bin/bash

set -e

SCRIPTPATH=$(dirname $realpath "$0")
export PATH=$(realpath $SCRIPTPATH/../../../../)/prebuilts/clang/ohos/linux-x86_64/llvm/bin/:$(realpath $SCRIPTPATH/../../../../)/prebuilts/develop_tools/pahole/bin/:$PATH
export PRODUCT_PATH=vendor/hihope/rk3568
IMAGE_SIZE=64  # 64M
IMAGE_BLOCKS=4096
ENABLE_LTO_O0=${3}

CPUs=`sed -n "N;/processor/p" /proc/cpuinfo|wc -l`
MAKE="make LLVM=1 LLVM_IAS=1 CROSS_COMPILE=aarch64-linux-gnu-"
[ "${ENABLE_LTO_O0}" == "enable_lto_O0" ] && MAKE="${MAKE} KCFLAGS=-Wl,--lto-O0"
BUILD_PATH=boot_linux
EXTLINUX_PATH=${BUILD_PATH}/extlinux
EXTLINUX_CONF=${EXTLINUX_PATH}/extlinux.conf
# TOYBRICK_DTB=toybrick.dtb
MY3568_DTB=rk3568-evb1-ddr4-v10.dtb
if [ ${KBUILD_OUTPUT} ]; then
	OBJ_PATH=${KBUILD_OUTPUT}/
fi

ID_MODEL=1
ID_ARCH=2
ID_UART=3
ID_DTB=4
ID_IMAGE=5
ID_CONF=6
model_list=(
	"TB-RK3568X0   arm64 0xfe660000 rk3568-toybrick-x0-linux  Image rockchip_linux_defconfig"
	"TB-RK3568X10  arm64 0xfe660000 rk3568-toybrick-x10-linux Image rockchip_linux_defconfig"
	"MYBOARD3568   arm64 0xfe660000 rk3568-evb1-ddr4-v10 Image rockchip_linux_defconfig"
)


function help()
{
	echo "Usage: ./make-ohos.sh {BOARD_NAME}"
	echo "e.g."
	for i in "${model_list[@]}"; do
		echo "  ./make-ohos.sh $(echo $i | awk '{print $1}')"
	done
}


function make_extlinux_conf()
{
	dtb_path=$1
	uart=$2
	image=$3
	
	echo "label rockchip-kernel-5.10" > ${EXTLINUX_CONF}
	echo "	kernel /extlinux/${image}" >> ${EXTLINUX_CONF}
	# echo "	fdt /extlinux/${TOYBRICK_DTB}" >> ${EXTLINUX_CONF}
	echo "	fdt /extlinux/${MY3568_DTB}" >> ${EXTLINUX_CONF}
	cmdline="append earlycon=uart8250,mmio32,${uart} root=PARTUUID=614e0000-0000-4b53-8000-1d28000054a9 rw rootwait rootfstype=ext4"
	echo "  ${cmdline}" >> ${EXTLINUX_CONF}
}

function make_kernel_image()
{
	arch=$1
	conf=$2
	dtb=$3
	
	if [ "$GPUDRIVER" == "mesa3d" ]; then 
		config_base="arch/${arch}/configs/${conf}"
		config_frag="../../../../device/soc/rockchip/panfrost.config"
		ARCH=${arch} ./scripts/kconfig/merge_config.sh ${config_base} ${config_frag}
	else
		${MAKE} ARCH=${arch} ${conf}
	fi

	if [ $? -ne 0 ]; then
		echo "FAIL: ${MAKE} ARCH=${arch} ${conf}"
		return -1
	fi

	${MAKE} ARCH=${arch} ${dtb}.img -j${CPUs}
	if [ $? -ne 0 ]; then
		echo "FAIL: ${MAKE} ARCH=${arch} ${dtb}.img"
		return -2
	fi

	return 0
}

function make_ext2_image()
{
	blocks=${IMAGE_BLOCKS}
	block_size=$((${IMAGE_SIZE} * 1024 * 1024 / ${blocks}))

	if [ "`uname -m`" == "aarch64" ]; then
		echo y | sudo mke2fs -b ${block_size} -d boot_linux -i 8192 -t ext2 boot_linux.img ${blocks}
	else
		genext2fs -B ${blocks} -b ${block_size} -d boot_linux -i 8192 -U boot_linux.img
	fi

	return $?
}

function make_boot_linux()
{
	arch=${!ID_ARCH}
	uart=${!ID_UART}
	dtb=${!ID_DTB}
	image=${!ID_IMAGE}
	conf=${!ID_CONF}
	if [ ${arch} == "arm" ]; then
		dtb_path=arch/arm/boot/dts
	else
		dtb_path=arch/arm64/boot/dts/rockchip
	fi

	rm -rf ${BUILD_PATH}
	mkdir -p ${EXTLINUX_PATH}

	make_kernel_image ${arch} ${conf} ${dtb}
	if [ $? -ne 0 ]; then
		exit 1
	fi
	make_extlinux_conf ${dtb_path} ${uart} ${image}
	cp -f ${OBJ_PATH}arch/${arch}/boot/${image} ${EXTLINUX_PATH}/
	# cp -f ${OBJ_PATH}${dtb_path}/${dtb}.dtb ${EXTLINUX_PATH}/${TOYBRICK_DTB}
	cp -f ${OBJ_PATH}${dtb_path}/${dtb}.dtb ${EXTLINUX_PATH}/${MY3568_DTB}
	cp -f logo*.bmp ${BUILD_PATH}/
	if [ "enable_ramdisk" != "${ramdisk_flag}" ]; then
		make_ext2_image
	fi
}

ramdisk_flag=$2
found=0
for i in "${model_list[@]}"; do
	if [ "$(echo $i | awk '{print $1}')" == "$1" ]; then
		make_boot_linux $i
		found=1
	fi
done

device\board\hihope\rk3568\kernel\build_kernel.sh

修改内核编译指定使用刚刚的 MYBOARD3568，替换原来 TB-RK3568X0

# eval $MAKE_OHOS_ENV ./make-ohos.sh TB-RK3568X0 $RAMDISK_ARG ${ENABLE_LTO_O0}
eval $MAKE_OHOS_ENV ./make-ohos.sh MYBOARD3568 $RAMDISK_ARG ${ENABLE_LTO_O0}

再次执行 ./build.sh --product-name rk3568 --ccache 重新编译

8、编译错误举例

错误1、内核版本差异，dts 文件属性不兼容，出现在 rk3568-dram-default-timing.dtsi 中 260 行，去修改注释即可

[OHOS ERROR] DTC arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtb
[OHOS ERROR] Error: /home/ubuntu/code/OpenHarmony4.0/out/kernel/src_tmp/linux-5.10/arch/arm64/boot/dts/rockchip/rk3568-dram-default-timing.dtsi:260.27-28 syntax error
[OHOS ERROR] FATAL ERROR: Unable to parse input tree
[OHOS ERROR] make[3]: *** [scripts/Makefile.lib:329: arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtb] Error 1
[OHOS ERROR] make[2]: *** [/home/ubuntu/code/OpenHarmony4.0/out/kernel/src_tmp/linux-5.10/Makefile:1405: rockchip/rk3568-evb1-ddr4-v10.dtb] Error 2
[OHOS ERROR] make[2]: *** Waiting for unfinished jobs…
[OHOS ERROR] make[1]: *** [arch/arm64/Makefile:208: rk3568-evb1-ddr4-v10.img] Error 2
[OHOS ERROR] make[1]: Leaving directory ‘/home/ubuntu/code/OpenHarmony4.0/out/kernel/OBJ/linux-5.10’
[OHOS ERROR] make: *** [Makefile:185: __sub-make] Error 2

错误2、修改的配置文件有问题

[OHOS ERROR] FAILED: …/kernel/src_tmp/linux-5.10/boot_linux …/kernel/checkpoint/compile_check
[OHOS ERROR] /usr/bin/env …/…/device/board/hihope/rk3568/kernel/build_kernel.sh …/…/kernel/linux/linux-5.10 /home/ubuntu/code/OpenHarmony4.0/out/rk3568/packages/phone/images /home/ubuntu/code/OpenHarmony4.0/device/board/hihope/rk3568 vendor/hihope/rk3568 /home/ubuntu/code/OpenHarmony4.0 rockchip rk3568 hihope root default disable_lto_O0