相较于vector的连续线性空间,list就显得复杂许多,它的好处是每次插入或删除一个元素,就配置或释放一个元素空间。因此,list对于空间的运用有绝对的精准,一点也不浪费。而且,对于任何位置的元素插入或元素移除,list永远是常数时间。
list头结点仅需要一个指针,其结构:
list不仅是一个双向链表,而且还是一个环状双向链表,因此迭代器必须具备前移和后移能力,所以list使用Bidirectional Iterators。
list还有一个重要性质,插入操作和接合操作都不会造成原有的list迭代器失效,这在vector是不成立的。因为vector的插入操作可能造成记忆体重新配置,导致原有的迭代器全部失效。甚至list的元素删除操作(erase),也只有“指向被删除元素”的那个迭代器失效,其他迭代器不受任何影响。
list和vector是两个常用的容器。什么时候最适合哪一个,必须视元素多寡、元素构造复杂程度、元素存取行为特性等而定。
list节点结构和list的数据结构
list本身和list节点的结构是不同的。STL list节点结构如下:
template <class T>
struct __list_node
{
typedef void* void_pointer;
void_pointer next;
void_pointer prev;
T data;
};
list头结点仅需要一个指针,其结构:
template <class T, class Alloc = alloc> //缺省使用alloc为配置器
class list {
protected:
typedef __list_node<T> list_node;
public:
typedef list_node * link_type;
protected:
link_type node; //只要一个指针,便可以表示整个环状链表,头指针
...
};
stl_list.h
// Filename: stl_list.h
/* NOTE: This is an internal header file, included by other STL headers.
* You should not attempt to use it directly.
*/
#ifndef __SGI_STL_INTERNAL_LIST_H
#define __SGI_STL_INTERNAL_LIST_H
__STL_BEGIN_NAMESPACE
#if defined(__sgi) && !defined(__GNUC__) && (_MIPS_SIM != _MIPS_SIM_ABI32)
#pragma set woff 1174
#endif
// list结点, 提供双向访问能力
template <class T>
struct __list_node // list节点的结构
{
typedef void* void_pointer;
void_pointer next;
void_pointer prev;
T data;
};
///
//list迭代器的设计
///
template<class T, class Ref, class Ptr>
struct __list_iterator
{
// 标记为'STL标准强制要求'的typedefs用于提供iterator_traits<I>支持
typedef __list_iterator<T, T&, T*> iterator; // STL标准强制要求
typedef __list_iterator<T, const T&, const T*> const_iterator;
typedef __list_iterator<T, Ref, Ptr> self;
typedef bidirectional_iterator_tag iterator_category;
typedef T value_type; // STL标准强制要求
typedef Ptr pointer; // STL标准强制要求
typedef Ref reference; // STL标准强制要求
typedef __list_node<T>* link_type;
typedef size_t size_type;
typedef ptrdiff_t difference_type; // STL标准强制要求
// 这个是迭代器实际管理的资源指针
link_type node; //只要一个指针,便可以表示整个环状链表,头指针
//迭代器构造函数
__list_iterator(link_type x) : node(x) {}
__list_iterator() {}
__list_iterator(const iterator& x) : node(x.node) {}
// 在STL算法中需要迭代器提供支持
bool operator==(const self& x) const { return node == x.node; }
bool operator!=(const self& x) const { return node != x.node; }
// 重载operator *, 对迭代器取值,返回实际维护的数据
reference operator*() const { return (*node).data; }
#ifndef __SGI_STL_NO_ARROW_OPERATOR
// 如果支持'->'则重载之
// 解释一下为什么要返回地址
// class A
// {
// public:
// // ...
// void fun();
// // ...
// }
// __list_iterator<A, A&, A*> iter(new A)
// iter->fun();
// 这就相当于调用(iter.operator())->fun();
// 经过重载使其行为和原生指针一致
pointer operator->() const { return &(operator*()); }
#endif /* __SGI_STL_NO_ARROW_OPERATOR */
// 前缀自加
self& operator++()
{
node = (link_type)((*node).next);
return *this;
}
// 后缀自加, 需要先产生自身的一个副本, 然会再对自身操作, 最后返回副本
self operator++(int)
{
self tmp = *this;
++*this;
return tmp;
}
self& operator--()
{
node = (link_type)((*node).prev);
return *this;
}
self operator--(int)
{
self tmp = *this;
--*this;
return tmp;
}
};
// 如果编译器支持模板类偏特化那么就不需要提供以下traits函数
// 直接使用<stl_iterator.h>中的
// template <class Iterator>
// struct iterator_traits
#ifndef __STL_CLASS_PARTIAL_SPECIALIZATION
template <class T, class Ref, class Ptr>
inline bidirectional_iterator_tag
iterator_category(const __list_iterator<T, Ref, Ptr>&) {
return bidirectional_iterator_tag();
}
template <class T, class Ref, class Ptr>
inline T*
value_type(const __list_iterator<T, Ref, Ptr>&) {
return 0;
}
template <class T, class Ref, class Ptr>
inline ptrdiff_t*
distance_type(const __list_iterator<T, Ref, Ptr>&) {
return 0;
}
#endif /* __STL_CLASS_PARTIAL_SPECIALIZATION */
// 默认allocator为alloc, 其具体使用版本请参照<stl_alloc.h>
template <class T, class Alloc = alloc>
class list
{
protected:
typedef void* void_pointer;
typedef __list_node<T> list_node;
// 这个提供STL标准的allocator接口
//list缺省使用alloc作为空间配置器并据此定义了list_node_allocator
// 专属之空间配置器,可以方便地每次配置一个节点大小
typedef simple_alloc<list_node, Alloc> list_node_allocator;
public:
typedef T value_type;
typedef value_type* pointer;
typedef const value_type* const_pointer;
typedef value_type& reference;
typedef const value_type& const_reference;
typedef list_node* link_type;
typedef size_t size_type;
typedef ptrdiff_t difference_type;
public:
typedef __list_iterator<T, T&, T*> iterator;
typedef __list_iterator<T, const T&, const T*> const_iterator;
#ifdef __STL_CLASS_PARTIAL_SPECIALIZATION
typedef reverse_iterator<const_iterator> const_reverse_iterator;
typedef reverse_iterator<iterator> reverse_iterator;
#else /* __STL_CLASS_PARTIAL_SPECIALIZATION */
typedef reverse_bidirectional_iterator<const_iterator, value_type,
const_reference, difference_type>
const_reverse_iterator;
typedef reverse_bidirectional_iterator<iterator, value_type, reference,
difference_type>
reverse_iterator;
#endif /* __STL_CLASS_PARTIAL_SPECIALIZATION */
protected:
// 使用上述的专属空间配置器list_node_allocator(n)配置n新结点
//以下四个函数分别用于配置、释放、构造、销毁一个节点
//该函数配置一个节点并回传
link_type get_node() { return list_node_allocator::allocate(); }
// 释放指定结点, 不进行析构, 析构交给全局的destroy,
// 见<stl_stl_uninitialized.h>
void put_node(link_type p) { list_node_allocator::deallocate(p); }
// 创建结点, 首先分配内存, 然后进行构造,有元素值
// 注: commit or rollback
link_type create_node(const T& x)
{
link_type p = get_node();
__STL_TRY {
construct(&p->data, x); //全局函数,构造/析构基本工具
}
__STL_UNWIND(put_node(p));
return p;
}
// 析构结点元素, 并释放内存
void destroy_node(link_type p)
{
destroy(&p->data); //全局函数,构造/析构基本工具
put_node(p);
}
protected:
void empty_initialize()
{
node = get_node(); //配置一个节点空间,令node指向它
node->next = node; //令node头尾指向自己,不设置元素值
node->prev = node;
}
// 创建值为value共n个结点的链表
// 注: commit or rollback
void fill_initialize(size_type n, const T& value)
{
empty_initialize();
__STL_TRY {
// 此处插入操作时间复杂度O(1)
insert(begin(), n, value);
}
__STL_UNWIND(clear(); put_node(node));
}
// 以一个区间初始化链表
// 注: commit or rollback
#ifdef __STL_MEMBER_TEMPLATES
template <class InputIterator>
void range_initialize(InputIterator first, InputIterator last)
{
empty_initialize();
__STL_TRY {
insert(begin(), first, last);
}
__STL_UNWIND(clear(); put_node(node));
}
#else /* __STL_MEMBER_TEMPLATES */
void range_initialize(const T* first, const T* last) {
empty_initialize();
__STL_TRY {
insert(begin(), first, last);
}
__STL_UNWIND(clear(); put_node(node));
}
void range_initialize(const_iterator first, const_iterator last) {
empty_initialize();
__STL_TRY {
insert(begin(), first, last);
}
__STL_UNWIND(clear(); put_node(node));
}
#endif /* __STL_MEMBER_TEMPLATES */
protected:
link_type node; //这个是链表头结点, 其本身不保存数据
public:
//用于空链表的建立,不用指定任何参数
//empty_initialize()函数的实现在是上面
list() { empty_initialize(); }
iterator begin() { return (link_type)((*node).next); }
const_iterator begin() const { return (link_type)((*node).next); }
//让头节点node指向可以置于尾端的一个空节点,node便能符合
//STL对于“前闭后开”区间的要求,成为last迭代器。这样的话,
//begin(),end(),empty(),size(),front(),back()等函数都能轻易完成
iterator end() { return node; } //链表为环,所以头节点就是end
const_iterator end() const { return node; }
reverse_iterator rbegin() { return reverse_iterator(end()); }
const_reverse_iterator rbegin() const {
return const_reverse_iterator(end());
}
reverse_iterator rend() { return reverse_iterator(begin()); }
const_reverse_iterator rend() const {
return const_reverse_iterator(begin());
}
// 头结点指向自身说明链表中无元素
bool empty() const { return node->next == node; }
// 使用全局函数distance()进行计算, 时间复杂度O(n)
size_type size() const {
size_type result = 0;
distance(begin(), end(), result);
return result;
}
size_type max_size() const { return size_type(-1); }
reference front() { return *begin(); }
const_reference front() const { return *begin(); }
//end指向的是一个空白节点,所以要先自减再求值
reference back() { return *(--end()); }
const_reference back() const { return *(--end()); }
void swap(list<T, Alloc>& x) { __STD::swap(node, x.node);
//在迭代器position位置插入一个节点,内容为x
iterator insert(iterator position, const T& x)
{
link_type tmp = create_node(x); //产生节点,内容为x
tmp->next = position.node;
tmp->prev = position.node->prev;
(link_type(position.node->prev))->next = tmp;
position.node->prev = tmp;
return tmp;
}
iterator insert(iterator position) { return insert(position, T()); }
#ifdef __STL_MEMBER_TEMPLATES
template <class InputIterator>
void insert(iterator position, InputIterator first, InputIterator last);
#else /* __STL_MEMBER_TEMPLATES */
void insert(iterator position, const T* first, const T* last);
void insert(iterator position, const_iterator first, const_iterator last);
#endif /* __STL_MEMBER_TEMPLATES */
// 指定位置插入n个值为x的元素, 详细解析见实现部分
void insert(iterator pos, size_type n, const T& x);
void insert(iterator pos, int n, const T& x)
{
insert(pos, (size_type)n, x);
}
void insert(iterator pos, long n, const T& x)
{
insert(pos, (size_type)n, x);
}
// 在链表前端插入结点,以下两个函数调用insert()
void push_front(const T& x) { insert(begin(), x); }
// 在链表最后插入结点
void push_back(const T& x) { insert(end(), x); }
// 擦除指定结点
iterator erase(iterator position)
{
link_type next_node = link_type(position.node->next);
link_type prev_node = link_type(position.node->prev);
prev_node->next = next_node;
next_node->prev = prev_node;
destroy_node(position.node);
return iterator(next_node);
}
// 擦除一个区间的结点, 详细解析见实现部分
iterator erase(iterator first, iterator last);
void resize(size_type new_size, const T& x);
void resize(size_type new_size) { resize(new_size, T()); }
void clear();
// 删除链表第一个结点
void pop_front() { erase(begin()); }
// 删除链表最后一个结点
void pop_back() {
iterator tmp = end();
erase(--tmp);
}
list(size_type n, const T& value) { fill_initialize(n, value); }
list(int n, const T& value) { fill_initialize(n, value); }
list(long n, const T& value) { fill_initialize(n, value); }
explicit list(size_type n) { fill_initialize(n, T()); }
// 以一个区间元素为蓝本创建链表
#ifdef __STL_MEMBER_TEMPLATES
template <class InputIterator>
list(InputIterator first, InputIterator last)
{
range_initialize(first, last);
}#else /* __STL_MEMBER_TEMPLATES */
list(const T* first, const T* last) { range_initialize(first, last); }
list(const_iterator first, const_iterator last) {
range_initialize(first, last);
}
#endif /* __STL_MEMBER_TEMPLATES */
// 复制构造
list(const list<T, Alloc>& x) {
range_initialize(x.begin(), x.end());
}
~list()
{
// 释放所有结点
// 使用全局函数distance()进行计算, 时间复杂度O(n)
size_type size() const {
size_type result = 0;
distance(begin(), end(), result);
return result;
}
clear();
// 释放头结点
put_node(node);
}
list<T, Alloc>& operator=(const list<T, Alloc>& x);
protected:
// 将[first, last)区间插入到position
// 如果last == position, 则相当于链表不变化, 不进行操作
//list内部提供所谓的迁移操作(transfer):将某连续范围内元素迁移到某个特定位置
//之前。技术上很简单,节点间指针移动而已。该操作为其它复杂操作如splic、sort
//以及merge等奠定了良好的基础
//该函数将[first,last)内所有元素移动到position之前
//该函数接收的[last,last)区间可以在同一list中,也可以不再同一list内。
//但是,position不能位于[first, last)
//代码下方有该函数的图示
void transfer(iterator position, iterator first, iterator last) {
if (position != last) {
(*(link_type((*last.node).prev))).next = position.node;
(*(link_type((*first.node).prev))).next = last.node;
(*(link_type((*position.node).prev))).next = first.node;
link_type tmp = link_type((*position.node).prev);
(*position.node).prev = (*last.node).prev;
(*last.node).prev = (*first.node).prev;
(*first.node).prev = tmp; } }
public:
// 将链表x移动到position之前
void splice(iterator position, list& x) {
if (!x.empty())
transfer(position, x.begin(), x.end());
}
// 将链表中i指向的内容移动到position之前
void splice(iterator position, list&, iterator i) {
iterator j = i;
++j;
if (position == i || position == j)
return;
transfer(position, i, j);
}
// 将[first, last}元素移动到position之前
void splice(iterator position, list&, iterator first, iterator last) {
if (first != last) transfer(position, first, last);
}
void remove(const T& value);
void unique();
void merge(list& x);
void reverse();
void sort();
#ifdef __STL_MEMBER_TEMPLATES template <class Predicate>
void remove_if(Predicate);
template <class BinaryPredicate> void unique(BinaryPredicate);
template <class StrictWeakOrdering> void merge(list&, StrictWeakOrdering);
template <class StrictWeakOrdering> void sort(StrictWeakOrdering);
#endif /* __STL_MEMBER_TEMPLATES */
friend bool operator== __STL_NULL_TMPL_ARGS (const list& x, const list& y);
};
// 判断两个链表是否相等
template <class T, class Alloc>
inline bool operator==(const list<T,Alloc>& x, const list<T,Alloc>& y)
{
typedef typename list<T,Alloc>::link_type link_type;
link_type e1 = x.node;
link_type e2 = y.node;
link_type n1 = (link_type) e1->next;
link_type n2 = (link_type) e2->next;
for ( ; n1 != e1 && n2 != e2 ;
n1 = (link_type) n1->next, n2 = (link_type) n2->next)
if (n1->data != n2->data)
return false;
return n1 == e1 && n2 == e2;
}
// 链表比较大小使用的是字典顺序
template <class T, class Alloc>
inline bool operator<(const list<T, Alloc>& x, const list<T, Alloc>& y)
{
return lexicographical_compare(x.begin(), x.end(), y.begin(), y.end());
}
// 如果编译器支持模板函数特化优先级
// 那么将全局的swap实现为使用list私有的swap以提高效率
#ifdef __STL_FUNCTION_TMPL_PARTIAL_ORDER
template <class T, class Alloc>
inline void swap(list<T, Alloc>& x, list<T, Alloc>& y){
x.swap(y);
}#endif /* __STL_FUNCTION_TMPL_PARTIAL_ORDER */
// 将[first, last)区间插入到position之前
#ifdef __STL_MEMBER_TEMPLATES
template <class T, class Alloc> template <class InputIterator>
void list<T, Alloc>::insert(iterator position,
InputIterator first, InputIterator last)
{
for ( ; first != last; ++first)
insert(position, *first);
}#else /* __STL_MEMBER_TEMPLATES */
template <class T, class Alloc>
void list<T, Alloc>::insert(iterator position, const T* first, const T* last)
{
for ( ; first != last; ++first)
insert(position, *first);
}
template <class T, class Alloc>
void list<T, Alloc>::insert(iterator position,
const_iterator first, const_iterator last)
{
for ( ; first != last; ++first)
insert(position, *first);
}
#endif /* __STL_MEMBER_TEMPLATES */
// 在position前插入n个值为x的元素
template <class T, class Alloc>
void list<T, Alloc>::insert(iterator position, size_type n, const T& x)
{
for ( ; n > 0; --n)
insert(position, x);
}
// 擦除[first, last)间的结点
template <class T, class Alloc>
list<T,Alloc>::iterator list<T, Alloc>::erase(iterator first, iterator last)
{
while (first != last)
erase(first++); return last;
}
// 重新设置容量大小
// 如果当前容量小于新容量, 则新增加值为x的元素, 使容量增加至新指定大小
// 如果当前容量大于新容量, 则析构出来的元素
template <class T, class Alloc>
void list<T, Alloc>::resize(size_type new_size, const T& x)
{
iterator i = begin();
size_type len = 0;
for ( ; i != end() && len < new_size; ++i, ++len)
;
if (len == new_size)
erase(i, end());
else // i == end()
insert(end(), new_size - len, x);}
// 销毁所有结点, 将链表置空
template <class T, class Alloc>
void list<T, Alloc>::clear()
{
link_type cur = (link_type) node->next;
while (cur != node) { //遍历每个节点
link_type tmp = cur;
cur = (link_type) cur->next;
destroy_node(tmp); //销毁(析构并释放)
}
//恢复node初始状态
node->next = node;
node->prev = node;
}
// 链表赋值操作
// 如果当前容器元素少于x容器, 则析构多余元素,
// 否则将调用insert插入x中剩余的元素
template <class T, class Alloc>
list<T, Alloc>& list<T, Alloc>::operator=(const list<T, Alloc>& x)
{
if (this != &x) {
iterator first1 = begin();
iterator last1 = end();
const_iterator first2 = x.begin();
const_iterator last2 = x.end();
while (first1 != last1 && first2 != last2)
*first1++ = *first2++;
if (first2 == last2)
erase(first1, last1);
else insert(last1, first2, last2);
}
return *this;
}
// 移除特定值的所有结点
// 时间复杂度O(n)
template <class T, class Alloc>
void list<T, Alloc>::remove(const T& value)
{
iterator first = begin();
iterator last = end();
while (first != last) {
iterator next = first;
++next;
if (*first == value) erase(first); //找到元素将其删除
first = next;
}
}
// 移除容器内所有的相邻的重复结点,“连续且相同”的元素才移除
// 时间复杂度O(n)
// 用户自定义数据类型需要提供operator ==()重载
template <class T, class Alloc>
void list<T, Alloc>::unique()
{
iterator first = begin();
iterator last = end();
if (first == last) return; //空链表,什么都不做
iterator next = first;
while (++next != last) {
//遍历每个节点
if (*first == *next)
erase(next);
else
first = next;
next = first;
}
}
// 假设当前容器和x都已序, 保证两容器合并后仍然有序
template <class T, class Alloc>
void list<T, Alloc>::merge(list<T, Alloc>& x)
{
iterator first1 = begin();
iterator last1 = end();
iterator first2 = x.begin();
iterator last2 = x.end();
while (first1 != last1 && first2 != last2)
if (*first2 < *first1) {
iterator next = first2;
transfer(first1, first2, ++next);
first2 = next;
}
else
++first1;
if (first2 != last2)
transfer(last1, first2, last2);}
// 将链表倒置
// 其算法核心是历遍链表, 每次取出一个结点, 并插入到链表起始点
// 历遍完成后链表满足倒置
template <class T, class Alloc>
void list<T, Alloc>::reverse()
{
if (node->next == node || link_type(node->next)->next == node) return;
iterator first = begin();
++first;
while (first != end()) {
iterator old = first;
++first;
transfer(begin(), old, first);
}
}
// 按照升序排序
template <class T, class Alloc>
void list<T, Alloc>::sort()
{
if (node->next == node || link_type(node->next)->next == node) return;
list<T, Alloc> carry;
list<T, Alloc> counter[64];
int fill = 0;
while (!empty()) {
carry.splice(carry.begin(), *this, begin());
int i = 0;
while(i < fill && !counter[i].empty()) {
counter[i].merge(carry); carry.swap(counter[i++]);
} carry.swap(counter[i]);
if (i == fill)
++fill;
}
for (int i = 1; i < fill; ++i)
counter[i].merge(counter[i-1]);
swap(counter[fill-1]);
}
#ifdef __STL_MEMBER_TEMPLATES
// 给定一个仿函数, 如果仿函数值为真则进行相应元素的移除
template <class T, class Alloc>
template <class Predicate>void list<T, Alloc>::remove_if(Predicate pred)
{
iterator first = begin();
iterator last = end();
while (first != last) {
iterator next = first;
++next;
if (pred(*first))
erase(first);
first = next;
}
}
// 根据仿函数, 决定如何移除相邻的重复结点
template <class T, class Alloc>
template <class BinaryPredicate>
void list<T, Alloc>::unique(BinaryPredicate binary_pred){
iterator first = begin();
iterator last = end();
if (first == last) return;
iterator next = first;
while (++next != last) {
if (binary_pred(*first, *next))
erase(next);
else
first = next;
next = first;
}
}
// 假设当前容器和x均已序, 将x合并到当前容器中, 并保证在comp仿函数
// 判定下仍然有序
template <class T, class Alloc> template <class StrictWeakOrdering>
void list<T, Alloc>::merge(list<T, Alloc>& x, StrictWeakOrdering comp)
{
iterator first1 = begin();
iterator last1 = end();
iterator first2 = x.begin();
iterator last2 = x.end();
while (first1 != last1 && first2 != last2)
if (comp(*first2, *first1)) {
iterator next = first2;
transfer(first1, first2, ++next);
first2 = next; }
else
++first1;
if (first2 != last2)
transfer(last1, first2, last2);
}
// 根据仿函数comp据定如何排序
template <class T, class Alloc> template <class StrictWeakOrdering>
void list<T, Alloc>::sort(StrictWeakOrdering comp)
{
if (node->next == node || link_type(node->next)->next == node)
return;
list<T, Alloc> carry;
list<T, Alloc> counter[64];
int fill = 0;
while (!empty()) {
carry.splice(carry.begin(), *this, begin());
int i = 0;
while(i < fill && !counter[i].empty()) {
counter[i].merge(carry, comp);
carry.swap(counter[i++]);
}
carry.swap(counter[i]);
if (i == fill)
++fill;
}
for (int i = 1; i < fill; ++i)
counter[i].merge(counter[i-1], comp);
swap(counter[fill-1]);
}
#endif /* __STL_MEMBER_TEMPLATES */
#if defined(__sgi) && !defined(__GNUC__) && (_MIPS_SIM != _MIPS_SIM_ABI32)
#pragma reset woff 1174
#endif__STL_END_NAMESPACE
#endif /* __SGI_STL_INTERNAL_LIST_H */