准备数据和星历,数据必须包含glonass数据,广播星历和精密星历必须包含glonass星历,广播星历可使用brdc*.*g,也可使用brdm*.*n,我选择的brdc*.*g,精密星历我选择的是codm。
因处理过程中需要修改文件,采用分布处理方式。
ln -s ../tables/* ./
sh_makexp -expt abcr -orbt codm -yr 2022 -doy 062 -sess 99 -srin -nav brdc* -apr lfile. -sinfo 30 00 00 2880 -gnss R
sh_sp3fit -f cod*.sp3 -o codm -d 2022 062 -t -u -gnss R
cp gcodr2.062 gcodm2.062
sh_check_sess -sess 062 -type gfile -file gcodm2.062
makej brdc* jbrdc2.062 '' R
sh_check_sess -sess 062 -type jfile -file jbrdc*
makex abcr.makex.batch
提示错误:MAKEX/getnav: Glonass nav orbit not accurate enough, must use sp3 file
经前辈指导:abcr.makex.batch文件中需要修改一行
sp3 0 改为 sp3 1 cod21994.sp3
再次运行makex abcr.makex.batch,通过;
fixdrv dabcr2.062
csh babcr2.bat
提示错误:MODEL/setup: Ocean tides requested but not on u-file
将u文件改为小写,uONE 改为 uone
再次运行csh babcr2.bat,成功。
注:错误提示:MAKEX/lib/readj: Satellite channel 1 (PRN= 0) not in J-file
brdc文件不对。
错误提示:MAKEX/getsp3: Error reading SP3 file type ERROR -1
abcr.makex.batch文件sp3那里修改不对。