POJ-模拟-1208 The Blocks Problem

The Blocks Problem

Time Limit: 1000MS		Memory Limit: 10000K
Total Submissions: 4400		Accepted: 1822

Description

Many areas of Computer Science use simple, abstract domains for both analytical and empirical studies. For example, an early AI study of planning and robotics (STRIPS) used a block world in which a robot arm performed tasks involving the manipulation of blocks. 
In this problem you will model a simple block world under certain rules and constraints. Rather than determine how to achieve a specified state, you will "program" a robotic arm to respond to a limited set of commands. 
The problem is to parse a series of commands that instruct a robot arm in how to manipulate blocks that lie on a flat table. Initially there are n blocks on the table (numbered from 0 to n-1) with block bi adjacent to block bi+1 for all 0 <= i < n-1 as shown in the diagram below: 

The valid commands for the robot arm that manipulates blocks are: 

move a onto b 
where a and b are block numbers, puts block a onto block b after returning any blocks that are stacked on top of blocks a and b to their initial positions. 


move a over b 
where a and b are block numbers, puts block a onto the top of the stack containing block b, after returning any blocks that are stacked on top of block a to their initial positions. 


pile a onto b 
where a and b are block numbers, moves the pile of blocks consisting of block a, and any blocks that are stacked above block a, onto block b. All blocks on top of block b are moved to their initial positions prior to the pile taking place. The blocks stacked above block a retain their order when moved. 


pile a over b 
where a and b are block numbers, puts the pile of blocks consisting of block a, and any blocks that are stacked above block a, onto the top of the stack containing block b. The blocks stacked above block a retain their original order when moved. 


quit 
terminates manipulations in the block world. 

Any command in which a = b or in which a and b are in the same stack of blocks is an illegal command. All illegal commands should be ignored and should have no affect on the configuration of blocks. 

Input

The input begins with an integer n on a line by itself representing the number of blocks in the block world. You may assume that 0 < n < 25. 
The number of blocks is followed by a sequence of block commands, one command per line. Your program should process all commands until the quit command is encountered. 

You may assume that all commands will be of the form specified above. There will be no syntactically incorrect commands.

Output

The output should consist of the final state of the blocks world. Each original block position numbered i ( 0 <= i < n where n is the number of blocks) should appear followed immediately by a colon. If there is at least a block on it, the colon must be followed by one space, followed by a list of blocks that appear stacked in that position with each block number separated from other block numbers by a space. Don't put any trailing spaces on a line. 

There should be one line of output for each block position (i.e., n lines of output where n is the integer on the first line of input). 

Sample Input

10
move 9 onto 1
move 8 over 1
move 7 over 1
move 6 over 1
pile 8 over 6
pile 8 over 5
move 2 over 1
move 4 over 9
quit

Sample Output

0: 0
1: 1 9 2 4
2:
3: 3
4:
5: 5 8 7 6
6:
7:
8:
9:

Source

Duke Internet Programming Contest 1990,uva 101

#include <stdio.h>
#include <string.h>
#include <iostream>
#include <fstream>
#include <queue>
#include <stdlib.h>
using namespace std;
class blocksC{
    public:
    int num_list[30],count;
    int find_sb(int n)
    {
        for(int i=0;i<count;i++)if(num_list[i]==n)return i;
        return -1;
    }
    int find_above(int a,int *num)
    {
        int ha=find_sb(a),num_count=0;
        for(int i=ha;i<count;i++)
        {
            num[num_count++]=num_list[i];
        }
        return num_count;
    }
    void show()
    {
        for(int i=0;i<count;i++)cout<<" "<<num_list[i];
    }
};
blocksC blocks[30];
int t;
int find_block(int n)
{
    int index;
    for(int i=0;i<t;i++)
    {
        if(blocks[i].find_sb(n)!=-1){index=i;return index;}
    }
}
int main()
{
    //ifstream fin("ha.txt");
    int a,b,guy_moved,guys_moved[30],index1,index2;
    cin>>t;
    char s1[5],s2[5];

    for(int i=0;i<t;i++)
    {
        blocks[i].count=1;
        blocks[i].num_list[0]=i;
    }
    while(cin>>s1&&s1[0]!='q')
    {
        cin>>a>>s2>>b;
        if(s1[0]=='m')
        //这里是move 的情况
        {
            //把a 上方归位
            //cout<<a<<" "<<b;
            index1=find_block(a);
            index2=blocks[index1].find_sb(a);
            //cout<<index1<<" "<<index2;
            for(int i=index2+1;i<blocks[index1].count;i++)
            {
                blocks[blocks[index1].num_list[i]].count=1;
                blocks[blocks[index1].num_list[i]].num_list[0]=blocks[index1].num_list[i];
            }
            blocks[index1].count-=blocks[index1].count-index2;
            //cout<<"blocks["<<index1<<"].count"<<blocks[index1].count<<endl;
            if(s2[1]=='n')//onto
            {
                //把b上方归位先
                index1=find_block(b);
                index2=blocks[index1].find_sb(b);
                for(int i=index2+1;i<blocks[index1].count;i++)
                {
                    blocks[blocks[index1].num_list[i]].count=1;
                    blocks[blocks[index1].num_list[i]].num_list[0]=blocks[index1].num_list[i];
                }
                blocks[index1].count-=blocks[index1].count-index2-1;
                blocks[index1].num_list[blocks[index1].count++]=a;
            }
            else if(s2[1]=='v')
            {
                //
                index1=find_block(b);
                blocks[index1].num_list[blocks[index1].count++]=a;
            }
        }
        else if(s1[0]=='p')
        {
            int count_guys,index_b;
            //先写over，把8所在的那一堆8以及以上的取出来，必须删掉（count减掉即可），放到guys_moved
            //个数为count_guys个。
            index1=find_block(a);index_b=find_block(b);
            count_guys=blocks[index1].find_above(a,guys_moved);
            blocks[index1].count-=count_guys;
            //如果s2是over，那么直接把guys_moved给全部读入到b里面，
            if(s2[1]=='v')
            {
                for(int i=0;i<count_guys;i++)
                {
                    blocks[index_b].num_list[blocks[index_b].count++]=guys_moved[i];

                }
            }
            else if(s2[1]=='n')
            {
                index2=blocks[index_b].find_sb(b);
                for(int i=index2+1;i<blocks[index_b].count;i++)
                {
                    blocks[blocks[index_b].num_list[i]].count=1;
                    blocks[blocks[index_b].num_list[i]].num_list[0]=blocks[index_b].num_list[i];
                }
                blocks[index_b].count-=blocks[index_b].count-index2-1;
                for(int i=0;i<count_guys;i++)
                {
                    blocks[index_b].num_list[blocks[index_b].count++]=guys_moved[i];

                }
            }
        }
    }
    for(int i=0;i<t;i++){cout<<i<<":";blocks[i].show();cout<<endl;}
}