杰里之109X如何设置串口打印篇

1打开
#define USE_DEBUG 0 /烧录IC必须为0********/
2
_near_func void uart_init(void) AT(MY_UART)
{
P0PU = 0;
P0PD = 0;

UART_BAUD = (24000000/(8 * 115200)) - 1;	//25;//0x37;					/* 25: cpu 24M, 115200bps*/	/*77 for 384*/ /*0x137 for 9600*/

UART_CON = 0x01;							/* enable uart */

P0DIR &= 0xBF;							/* P06 for transmit */
P0DIR |= 0x80;							/* P07 for receive */

//这里选择P06

//这里选择P24
/UART I/O-1/
// P2DIR &= ~BIT(4);
// P2DIR |= BIT(5);
// IO_MC0 |= BIT(6);
}